Re: [PATCH v2 1/3] ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL

[Naresh Kamboju]

The following dtbs build error noticed for arm build on stable rc 4.19 branch.

# make -sk KBUILD_BUILD_USER=KernelCI -C/linux ARCH=arm
CROSS_COMPILE=arm-linux-gnueabihf- HOSTCC=gcc O=build dtbs
 #
 ../arch/arm/boot/dts/imx6dl-icore-mipi.dts:11:10: fatal error:
imx6qdl-icore-1.5.dtsi: No such file or directory
    11 | #include "imx6qdl-icore-1.5.dtsi"
       |          ^~~~~~~~~~~~~~~~~~~~~~~~
 compilation terminated.
 make[2]: *** [scripts/Makefile.lib:294:
arch/arm/boot/dts/imx6dl-icore-mipi.dtb] Error 1


On Thu, 9 Jan 2020 at 13:16, Shawn Guo <shawnguo@xxxxxxxxxx> wrote:
>
> On Mon, Dec 30, 2019 at 05:30:19PM +0530, Jagan Teki wrote:
> > The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on
> > the 1.5 version of the i.Core MX6 cpu module. The 1.5 version
> > differs from the original one for a few details, including the
> > ethernet PHY interface clock provider.
> >
> > With this commit, the ethernet interface works properly:
> > SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver
> >
> > While before using the 1.5 version, ethernet failed to startup
> > do to un-clocked PHY interface:
> > fec 2188000.ethernet eth0: could not attach to PHY
> >
> > Similar fix has merged for i.Core MX6Q but missed to update for DL.
> >
> > Fixes: a8039f2dd089 ("ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support")
> > Cc: Jacopo Mondi <jacopo@xxxxxxxxxx>
> > Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
>
> Applied all 3, thanks.