Re: [PATCH 14/26] docs: i2c: smbus-protocol: use proper names for ACK and NACK

[Jean Delvare]

On Sun,  5 Jan 2020 23:50:00 +0100, Luca Ceresoli wrote:
> Use the proper ACK and NACK naming from the I2C specification instead of
> "accept" and "reverse accept".
> 
> Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
> ---
>  Documentation/i2c/smbus-protocol.rst | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
> index fbadd4d25ad5..10c4a989982c 100644
> --- a/Documentation/i2c/smbus-protocol.rst
> +++ b/Documentation/i2c/smbus-protocol.rst
> @@ -38,7 +38,7 @@ Key to symbols
>  S               Start condition
>  P               Stop condition
>  Rd/Wr (1 bit)   Read/Write bit. Rd equals 1, Wr equals 0.
> -A, NA (1 bit)   Accept and reverse accept bit.
> +A, NA (1 bit)   Acknowledge (ACK) and Not Acknowledge (NACK) bit
>  Addr  (7 bits)  I2C 7 bit address. Note that this can be expanded as usual to
>                  get a 10 bit I2C address.
>  Comm  (8 bits)  Command byte, a data byte which often selects a register on

Reviewed-by: Jean Delvare <jdelvare@xxxxxxx>

-- 
Jean Delvare
SUSE L3 Support