[PATCH v2] arm64: dts: allwinner: a64: Add gpio bank supply for A64-Olinuxino

[Emmanuel Vadot]

From: Emmanuel Vadot <manu@xxxxxxxxxxx>

Add the regulators for each bank on this boards.
For VCC-PL only add a comment on what regulator is used. We cannot add
the property without causing a circular dependency as the PL pins are
used to talk to the PMIC.

Signed-off-by: Emmanuel Vadot <manu@xxxxxxxxxxx>
---
v2:
 - Remove vcc-pl-supply in r_pio as it cause a circular dependency.

 .../boot/dts/allwinner/sun50i-a64-olinuxino.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 01a9a52edae4..7e71b5b12f98 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -163,6 +163,17 @@ &ohci1 {
 	status = "okay";
 };
 
+&pio {
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -175,6 +186,12 @@ axp803: pmic@3a3 {
 	};
 };
 
+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
+/* interface used to talk to the PMIC in on the PL pins */
+/* &r_pio { */
+/*	vcc-pl-supply = <&reg_aldo2>; */
+/* }; */
+
 #include "axp803.dtsi"
 
 &ac_power_supply {
-- 
2.24.1