Re: [RFT PATCH 0/4] hwmon: k10temp driver improvements

[Ken Moffat]

On Fri, 17 Jan 2020 at 03:58, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> Hi Ken,
>
> SMBUSMASTER 0 is the CPU, so we have a match with the temperatures.
>
OK, thanks for that information.

>
> Both Vcore and Icore should be much less when idle, and higher under
> load. The data from the Super-IO chip suggests that it is a Nuvoton
> chip. Can you report its first voltage (in0) ? That should roughly
> match Vcore.
>
> All other data looks ok.
>
> Thanks,
> Guenter

Hi Guenter,

unfortunately I don't have any report of in0. I'm guessing I need some
module(s) which did not seem to do anything useful in the past.

All I have in the 'in' area is
nct6779-isa-0290
Adapter: ISA adapter
Vcore:                  +0.30 V  (min =  +0.00 V, max =  +1.74 V)
in1:                    +0.00 V  (min =  +0.00 V, max =  +0.00 V)
AVCC:                   +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+3.3V:                  +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                    +1.90 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                    +0.90 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                    +1.50 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:                   +3.47 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
Vbat:                   +3.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                    +0.00 V  (min =  +0.00 V, max =  +0.00 V)
in10:                   +0.32 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                   +1.06 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                   +1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                   +0.94 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                   +1.84 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

and at that point Vcore was reported as 1.41V (system idle)

Äen
-- 
                     Also Spuke Zerothruster
                                     (Finnegans Wake)