Re: [PATCH] arm64: dts: allwinner: a64: Add gpio bank supply for A64-Olinuxino

[Chen-Yu Tsai]

On Fri, Jan 17, 2020 at 3:47 AM Emmanuel Vadot <manu@xxxxxxxxxxx> wrote:
>
> Add the regulators for each bank on this boards.
>
> Signed-off-by: Emmanuel Vadot <manu@xxxxxxxxxxx>
> ---
>  .../boot/dts/allwinner/sun50i-a64-olinuxino.dts   | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> index 01a9a52edae4..1a25abf6065c 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> @@ -163,6 +163,17 @@ &ohci1 {
>         status = "okay";
>  };
>
> +&pio {
> +       vcc-pa-supply = <&reg_dcdc1>;
> +       vcc-pb-supply = <&reg_dcdc1>;
> +       vcc-pc-supply = <&reg_dcdc1>;
> +       vcc-pd-supply = <&reg_dcdc1>;
> +       vcc-pe-supply = <&reg_aldo1>;
> +       vcc-pf-supply = <&reg_dcdc1>;
> +       vcc-pg-supply = <&reg_dldo4>;
> +       vcc-ph-supply = <&reg_dcdc1>;
> +};
> +
>  &r_rsb {
>         status = "okay";
>
> @@ -175,6 +186,10 @@ axp803: pmic@3a3 {
>         };
>  };
>
> +&r_pio {
> +       vcc-pl-supply = <&reg_aldo2>;

This is likely going to cause a circular dependency, because the RSB
interface that is used to talk to the PMIC is also on the PL pins.

(How does FreeBSD deal with this?)

Instead, just add a comment describing what is really used, and set
the regulator to always-on, which should already be the case.

ChenYu

> +};
> +
>  #include "axp803.dtsi"
>
>  &ac_power_supply {
> --
> 2.24.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel