[PATCH 4.19 28/84] s390/qeth: fix false reporting of VNIC CHAR config failure

[Greg Kroah-Hartman]

From: Alexandra Winter <wintera@xxxxxxxxxxxxx>

commit 68c57bfd52836e31bff33e5e1fc64029749d2c35 upstream.

Symptom: Error message "Configuring the VNIC characteristics failed"
in dmesg whenever an OSA interface on z15 is set online.

The VNIC characteristics get re-programmed when setting a L2 device
online. This follows the selected 'wanted' characteristics - with the
exception that the INVISIBLE characteristic unconditionally gets
switched off.

For devices that don't support INVISIBLE (ie. OSA), the resulting
IO failure raises a noisy error message
("Configuring the VNIC characteristics failed").
For IQD, INVISIBLE is off by default anyways.

So don't unnecessarily special-case the INVISIBLE characteristic, and
thereby suppress the misleading error message on OSA devices.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@xxxxxxxxxxxxx>
Reviewed-by: Julian Wiedmann <jwi@xxxxxxxxxxxxx>
Signed-off-by: Julian Wiedmann <jwi@xxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/s390/net/qeth_l2_main.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -2367,7 +2367,6 @@ static void qeth_l2_vnicc_init(struct qe
 	error = qeth_l2_vnicc_recover_timeout(card, QETH_VNICC_LEARNING,
 					      timeout);
 	chars_tmp = card->options.vnicc.wanted_chars ^ QETH_VNICC_DEFAULT;
-	chars_tmp |= QETH_VNICC_BRIDGE_INVISIBLE;
 	chars_len = sizeof(card->options.vnicc.wanted_chars) * BITS_PER_BYTE;
 	for_each_set_bit(i, &chars_tmp, chars_len) {
 		vnicc = BIT(i);