[PATCH net] net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec

[Florian Fainelli]

With the implementation of the system reset controller we lost a setting
that is currently applied by the bootloader and which configures the IMP
port for 2Gb/sec, the default is 1Gb/sec. This is needed given the
number of ports and applications we expect to run so bring back that
setting.

Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 drivers/net/dsa/bcm_sf2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index e43040c9f9ee..3e8635311d0d 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -68,7 +68,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 
 		/* Force link status for IMP port */
 		reg = core_readl(priv, offset);
-		reg |= (MII_SW_OR | LINK_STS);
+		reg |= (MII_SW_OR | LINK_STS | GMII_SPEED_UP_2G);
 		core_writel(priv, reg, offset);
 
 		/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
-- 
2.17.1