Re: [PATCH v3 35/36] platform/x86: intel_pmc_ipc: Convert to MFD
From: Lee Jones
Date: Thu Jan 16 2020 - 08:20:58 EST
On Mon, 13 Jan 2020, Mika Westerberg wrote:
> This driver only creates a bunch of platform devices sharing resources
> belonging to the PMC device. This is pretty much what MFD subsystem is
> for so move the driver there, renaming it to intel_pmc_bxt.c which
> should be more clear what it is.
>
> MFD subsystem provides nice helper APIs for subdevice creation so
> convert the driver to use those. Unfortunately the ACPI device includes
> separate resources for most of the subdevices so we cannot simply call
> mfd_add_devices() to create all of them but instead we need to call it
> separately for each device.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> ---
> drivers/mfd/Kconfig | 16 +-
> drivers/mfd/Makefile | 1 +
> drivers/mfd/intel_pmc_bxt.c | 543 +++++++++++++++
> drivers/platform/x86/Kconfig | 16 +-
> drivers/platform/x86/Makefile | 1 -
> drivers/platform/x86/intel_pmc_ipc.c | 650 ------------------
> .../platform/x86/intel_telemetry_debugfs.c | 2 +-
> drivers/usb/typec/tcpm/Kconfig | 2 +-
> .../linux/mfd/intel_pmc_bxt.h | 11 +-
> 9 files changed, 573 insertions(+), 669 deletions(-)
> create mode 100644 drivers/mfd/intel_pmc_bxt.c
> delete mode 100644 drivers/platform/x86/intel_pmc_ipc.c
> rename arch/x86/include/asm/intel_pmc_ipc.h => include/linux/mfd/intel_pmc_bxt.h (83%)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 59515142438e..b3b83932aaec 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -551,7 +551,7 @@ config INTEL_SOC_PMIC
>
> config INTEL_SOC_PMIC_BXTWC
> tristate "Support for Intel Broxton Whiskey Cove PMIC"
> - depends on INTEL_PMC_IPC
> + depends on MFD_INTEL_PMC_BXT
> select MFD_CORE
> select REGMAP_IRQ
> help
> @@ -632,6 +632,20 @@ config MFD_INTEL_MSIC
> Passage) chip. This chip embeds audio, battery, GPIO, etc.
> devices used in Intel Medfield platforms.
>
> +config MFD_INTEL_PMC_BXT
> + tristate "Intel PMC Driver for Broxton"
> + depends on X86
> + depends on X86_PLATFORM_DEVICES
> + depends on ACPI
> + select INTEL_SCU_IPC
> + select MFD_CORE
> + help
> + This driver provides support for PMC (Power Management
"the PMC"
> + Controller) on Intel Broxton and Apollo Lake. PMC is a
"the PMC"
> + multi-function device that exposes IPC, General Control
> + Register and P-unit access. In addition this creates devices
> + for iTCO watchdog and telemetry that are part of the PMC.
>
> config MFD_IPAQ_MICRO
> bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
> depends on SA1100_H3100 || SA1100_H3600
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index aed99f08739f..34563a6a047b 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -211,6 +211,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
> obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
> obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
> obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
> +obj-$(CONFIG_MFD_INTEL_PMC_BXT) += intel_pmc_bxt.o
> obj-$(CONFIG_MFD_PALMAS) += palmas.o
> obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
> obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
> diff --git a/drivers/mfd/intel_pmc_bxt.c b/drivers/mfd/intel_pmc_bxt.c
> new file mode 100644
> index 000000000000..6cc87df4f573
> --- /dev/null
> +++ b/drivers/mfd/intel_pmc_bxt.c
> @@ -0,0 +1,543 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for the Intel Broxton PMC
> + *
> + * (C) Copyright 2014-2015, 2020 Intel Corporation
> + *
> + * This driver is based on Intel SCU IPC driver(intel_scu_ipc.c) by
> + * Sreedhara DS <sreedhara.ds@xxxxxxxxx>
> + *
> + * PMC running in ARC processor communicates with other entity running in IA
> + * core through IPC mechanism which in turn messaging between IA core ad PMC.
> + */
"The PMC" .. "on the ARC" ... "another entity" ... "the IA"
"an IPC" ... "sends messages" ... "the IA and the PMC."
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/io-64-nonatomic-lo-hi.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/intel_pmc_bxt.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/intel_scu_ipc.h>
> +
> +#include <linux/platform_data/itco_wdt.h>
Why are these 2 header files separated form the rest?
> +/* Residency with clock rate at 19.2MHz to usecs */
> +#define S0IX_RESIDENCY_IN_USECS(d, s) \
> +({ \
> + u64 result = 10ull * ((d) + (s)); \
> + do_div(result, 192); \
> + result; \
OOI, what does this line do?
> +})
> +
> +/* exported resources from IFWI */
Proper grammar please.
"Exported"
> +#define PLAT_RESOURCE_IPC_INDEX 0
> +#define PLAT_RESOURCE_IPC_SIZE 0x1000
> +#define PLAT_RESOURCE_GCR_OFFSET 0x1000
> +#define PLAT_RESOURCE_GCR_SIZE 0x1000
> +#define PLAT_RESOURCE_BIOS_DATA_INDEX 1
> +#define PLAT_RESOURCE_BIOS_IFACE_INDEX 2
> +#define PLAT_RESOURCE_TELEM_SSRAM_INDEX 3
> +#define PLAT_RESOURCE_ISP_DATA_INDEX 4
> +#define PLAT_RESOURCE_ISP_IFACE_INDEX 5
> +#define PLAT_RESOURCE_GTD_DATA_INDEX 6
> +#define PLAT_RESOURCE_GTD_IFACE_INDEX 7
> +#define PLAT_RESOURCE_ACPI_IO_INDEX 0
> +
> +/*
> + * BIOS does not create an ACPI device for each PMC function,
> + * but exports multiple resources from one ACPI device(IPC) for
> + * multiple functions. This driver is responsible to create a
"for creating"
> + * platform device and to export resources for those functions.
Prefer "child device" or "sub-device".
> + */
> +#define TCO_DEVICE_NAME "iTCO_wdt"
> +#define SMI_EN_OFFSET 0x40
> +#define SMI_EN_SIZE 4
> +#define TCO_BASE_OFFSET 0x60
> +#define TCO_REGS_SIZE 16
> +#define PUNIT_DEVICE_NAME "intel_punit_ipc"
> +#define TELEMETRY_DEVICE_NAME "intel_telemetry"
> +#define TELEM_SSRAM_SIZE 240
> +#define TELEM_PMC_SSRAM_OFFSET 0x1B00
> +#define TELEM_PUNIT_SSRAM_OFFSET 0x1A00
> +
> +/* PMC register bit definitions */
> +
> +/* PMC_CFG_REG bit masks */
> +#define PMC_CFG_NO_REBOOT_MASK BIT_MASK(4)
> +#define PMC_CFG_NO_REBOOT_EN (1 << 4)
> +#define PMC_CFG_NO_REBOOT_DIS (0 << 4)
> +
> +static struct intel_pmc_dev {
> + struct device *dev;
> +
> + /* iTCO */
Not sure these are required, the variables are clear enough.
> + struct resource tco_res[2];
> +
> + /* gcr */
> + void __iomem *gcr_mem_base;
> + spinlock_t gcr_lock;
> +
> + /* punit */
> + struct resource punit_res[6];
> + unsigned int punit_res_count;
> +
> + /* Telemetry */
> + struct resource *telem_base;
> +} pmcdev;
Why not create this dynamically?
> +static inline u64 gcr_data_readq(u32 offset)
> +{
> + return readq(pmcdev.gcr_mem_base + offset);
> +}
Abstraction for the sake of abstraction is generally frowned upon.
> +static inline int is_gcr_valid(u32 offset)
> +{
> + if (!pmcdev.gcr_mem_base)
> + return -EACCES;
Is this actually possible?
> + if (offset > PLAT_RESOURCE_GCR_SIZE)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +/**
> + * intel_pmc_gcr_read64() - Read a 64-bit PMC GCR register
> + * @offset: offset of GCR register from GCR address base
> + * @data: data pointer for storing the register output
> + *
> + * Reads the 64-bit PMC GCR register at given offset.
> + *
> + * Return: negative value on error or 0 on success.
> + */
> +int intel_pmc_gcr_read64(u32 offset, u64 *data)
> +{
> + int ret;
> +
> + spin_lock(&pmcdev.gcr_lock);
> +
> + ret = is_gcr_valid(offset);
> + if (ret < 0) {
> + spin_unlock(&pmcdev.gcr_lock);
> + return ret;
> + }
> +
> + *data = readq(pmcdev.gcr_mem_base + offset);
> +
> + spin_unlock(&pmcdev.gcr_lock);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(intel_pmc_gcr_read64);
What calls this?
It's probably nicer to provide the caller with a memory address.
Maybe using Regmap?
> +/**
> + * intel_pmc_gcr_update() - Update PMC GCR register bits
> + * @offset: offset of GCR register from GCR address base
> + * @mask: bit mask for update operation
> + * @val: update value
> + *
> + * Updates the bits of given GCR register as specified by
> + * @mask and @val.
> + *
> + * Return: negative value on error or 0 on success.
> + */
> +static int intel_pmc_gcr_update(u32 offset, u32 mask, u32 val)
> +{
> + u32 new_val;
> + int ret = 0;
> +
> + spin_lock(&pmcdev.gcr_lock);
> +
> + ret = is_gcr_valid(offset);
> + if (ret < 0)
> + goto gcr_unlock;
> +
> + new_val = readl(pmcdev.gcr_mem_base + offset);
> +
> + new_val &= ~mask;
> + new_val |= val & mask;
> +
> + writel(new_val, pmcdev.gcr_mem_base + offset);
> +
> + new_val = readl(pmcdev.gcr_mem_base + offset);
> +
> + /* check whether the bit update is successful */
> + if ((new_val & mask) != (val & mask)) {
> + ret = -EIO;
> + goto gcr_unlock;
> + }
> +
> +gcr_unlock:
> + spin_unlock(&pmcdev.gcr_lock);
> + return ret;
> +}
Looks like Regmap could save you the trouble here.
> +static int update_no_reboot_bit(void *priv, bool set)
> +{
> + u32 value = set ? PMC_CFG_NO_REBOOT_EN : PMC_CFG_NO_REBOOT_DIS;
> +
> + return intel_pmc_gcr_update(PMC_GCR_PMC_CFG_REG,
> + PMC_CFG_NO_REBOOT_MASK, value);
> +}
Only used by the Watchdog? Maybe move in there?
> +static ssize_t intel_pmc_simple_cmd_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
> + int subcmd;
> + int cmd;
> + int ret;
> +
> + ret = sscanf(buf, "%d %d", &cmd, &subcmd);
> + if (ret != 2) {
> + dev_err(dev, "Error args\n");
Maybe give the user a clue as to the format?
> + return -EINVAL;
> + }
> +
> + ret = intel_scu_ipc_dev_simple_command(scu, cmd, subcmd);
> + if (ret) {
> + dev_err(dev, "command %d error with %d\n", cmd, ret);
s/error/failed/
Use English grammar please.
> + return ret;
> + }
> + return (ssize_t)count;
No need to cast:
$ git grep -W "static ssize_t" | grep return.*count | grep ssize_t | wc -l
11
$ git grep -W "static ssize_t" | grep return.*count | grep -v ssize_t | wc -l
3256
> +}
> +static DEVICE_ATTR(simplecmd, 0200, NULL, intel_pmc_simple_cmd_store);
I assume you've drafted some documentation for this?
If not, you need to.
> +static ssize_t intel_pmc_northpeak_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
> + unsigned long val;
> + int subcmd;
> + int ret;
> +
> + if (kstrtoul(buf, 0, &val))
> + return -EINVAL;
> +
> + if (val)
> + subcmd = 1;
> + else
> + subcmd = 0;
'\n'
> + ret = intel_scu_ipc_dev_simple_command(scu, PMC_IPC_NORTHPEAK_CTRL, subcmd);
> + if (ret) {
> + dev_err(dev, "command north %d error with %d\n", subcmd, ret);
Use English grammar please.
> + return ret;
> + }
> + return (ssize_t)count;
> +}
> +static DEVICE_ATTR(northpeak, 0200, NULL, intel_pmc_northpeak_store);
So a user can write any command to the PMC from userspace?
Is that a good idea? No security implications for doing so?
...
I assume you've drafted some documentation for this?
If not, you need to.
> +static struct attribute *intel_pmc_attrs[] = {
> + &dev_attr_northpeak.attr,
> + &dev_attr_simplecmd.attr,
> + NULL
> +};
> +
> +static const struct attribute_group intel_pmc_group = {
> + .attrs = intel_pmc_attrs,
> +};
> +
> +static const struct attribute_group *intel_pmc_groups[] = {
> + &intel_pmc_group,
> + NULL
> +};
> +
> +static int pmc_create_punit_device(void)
> +{
> + struct mfd_cell punit = {
> + .name = PUNIT_DEVICE_NAME,
> + .resources = pmcdev.punit_res,
> + .num_resources = pmcdev.punit_res_count,
> + };
It's more common/preferred to create static structs.
Lots of examples in drivers/mfd.
> + if (!pmcdev.punit_res_count)
> + return 0;
> +
> + return devm_mfd_add_devices(pmcdev.dev, PLATFORM_DEVID_AUTO, &punit, 1,
> + NULL, 0, NULL);
> +}
> +
> +static int pmc_create_tco_device(void)
> +{
> + struct itco_wdt_platform_data tco_info = {
> + .name = "Apollo Lake SoC",
> + .version = 5,
> + .no_reboot_priv = &pmcdev,
> + .update_no_reboot_bit = update_no_reboot_bit,
> + };
> + struct mfd_cell tco = {
> + .name = TCO_DEVICE_NAME,
> + .ignore_resource_conflicts = true,
> + .platform_data = &tco_info,
> + .pdata_size = sizeof(tco_info),
> + .resources = pmcdev.tco_res,
> + .num_resources = ARRAY_SIZE(pmcdev.tco_res),
> + };
> +
> + if (!pmcdev.tco_res[0].start)
> + return 0;
How would this be possible?
> + return devm_mfd_add_devices(pmcdev.dev, PLATFORM_DEVID_AUTO, &tco, 1,
> + NULL, 0, NULL);
> +}
> +
> +static int pmc_create_telemetry_device(void)
> +{
> + struct resource telem_res[] = {
> + DEFINE_RES_MEM(TELEM_PUNIT_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> + DEFINE_RES_MEM(TELEM_PMC_SSRAM_OFFSET, TELEM_SSRAM_SIZE),
> + };
> + struct mfd_cell telem = {
> + .name = TELEMETRY_DEVICE_NAME,
> + .resources = telem_res,
> + .num_resources = ARRAY_SIZE(telem_res),
> + };
> +
> + if (!pmcdev.telem_base)
> + return 0;
> +
> + return devm_mfd_add_devices(pmcdev.dev, PLATFORM_DEVID_AUTO, &telem, 1,
> + pmcdev.telem_base, 0, NULL);
> +}
> +
> +static int pmc_create_devices(void)
> +{
> + int ret;
> +
> + /* If we have ACPI based watchdog use that instead */
> + if (!acpi_has_watchdog()) {
> + ret = pmc_create_tco_device();
> + if (ret) {
> + dev_err(pmcdev.dev, "Failed to add tco platform device\n");
> + return ret;
> + }
> + }
> +
> + ret = pmc_create_punit_device();
> + if (ret) {
> + dev_err(pmcdev.dev, "Failed to add punit platform device\n");
> + return ret;
> + }
> +
> + ret = pmc_create_telemetry_device();
> + if (ret)
> + dev_warn(pmcdev.dev, "Failed to add telemetry platform device\n");
> +
> + return ret;
> +}
Once you have split out the 'struct mfd_cells' from the functions
above, you can move the devm_mfd_add_devices() calls into probe() and
do away with all of these functions which will greatly simplify the
driver as a whole.
> +static int pmc_plat_get_res(struct platform_device *pdev,
> + struct intel_scu_ipc_pdata *pdata)
> +{
> + struct resource *res, *punit_res = pmcdev.punit_res;
> + struct resource *tco_res = pmcdev.tco_res;
> + void __iomem *addr;
> + int size;
> +
> + res = platform_get_resource(pdev, IORESOURCE_IO,
> + PLAT_RESOURCE_ACPI_IO_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get IO resource\n");
What is the IO resource here used for?
> + return -ENXIO;
Is "No such device or address" the correct response for this?
> +
Superfluous '\n'.
> + }
'\n'
> + tco_res[0].flags = IORESOURCE_IO;
> + tco_res[0].start = res->start + TCO_BASE_OFFSET;
> + tco_res[0].end = tco_res[0].start + TCO_REGS_SIZE - 1;
> + tco_res[1].flags = IORESOURCE_IO;
> + tco_res[1].start = res->start + SMI_EN_OFFSET;
> + tco_res[1].end = tco_res[1].start + SMI_EN_SIZE - 1;
> +
> + dev_dbg(&pdev->dev, "IO: %pR\n", res);
Do all of these dev_dgb() prints really still serve a purpose?
> + pmcdev.punit_res_count = 0;
> +
> + /* This is index 0 to cover BIOS data register */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_BIOS_DATA_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get res of P-unit BIOS data\n");
> + return -ENXIO;
> + }
> + punit_res[pmcdev.punit_res_count++] = *res;
> + dev_dbg(&pdev->dev, "P-unit BIOS data: %pR\n", res);
> +
> + /* This is index 1 to cover BIOS interface register */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_BIOS_IFACE_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get res of P-unit BIOS iface\n");
> + return -ENXIO;
> + }
> + punit_res[pmcdev.punit_res_count++] = *res;
> + dev_dbg(&pdev->dev, "P-unit BIOS interface: %pR\n", res);
> +
> + /* This is index 2 to cover ISP data register, optional */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_ISP_DATA_INDEX);
> + if (res) {
> + punit_res[pmcdev.punit_res_count++] = *res;
> + dev_dbg(&pdev->dev, "P-unit ISP data: %pR\n", res);
> + }
> +
> + /* This is index 3 to cover ISP interface register, optional */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_ISP_IFACE_INDEX);
> + if (res) {
> + punit_res[pmcdev.punit_res_count++] = *res;
> + dev_dbg(&pdev->dev, "P-unit ISP interface: %pR\n", res);
> + }
> +
> + /* This is index 4 to cover GTD data register, optional */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_GTD_DATA_INDEX);
> + if (res) {
> + punit_res[pmcdev.punit_res_count++] = *res;
> + dev_dbg(&pdev->dev, "P-unit GTD data: %pR\n", res);
> + }
> +
> + /* This is index 5 to cover GTD interface register, optional */
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_GTD_IFACE_INDEX);
> + if (res) {
> + punit_res[pmcdev.punit_res_count++] = *res;
> + dev_dbg(&pdev->dev, "P-unit GTD interface: %pR\n", res);
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_IPC_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get IPC resource\n");
> + return -ENXIO;
> + }
'\n'
> + size = PLAT_RESOURCE_IPC_SIZE + PLAT_RESOURCE_GCR_SIZE;
'size' seems like a superfluous variable.
> + res->end = res->start + size - 1;
> +
> + addr = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(addr))
> + return PTR_ERR(addr);
> +
> + pdata->ipc_regs = addr;
Wouldn't this fit better in intel_scu_ipc_probe()?
> + pmcdev.gcr_mem_base = addr + PLAT_RESOURCE_GCR_OFFSET;
> + dev_dbg(&pdev->dev, "IPC: %pR\n", res);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_TELEM_SSRAM_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get telemetry SSRAM resource\n");
Is this actually an error? If so, it should return an error code.
> + } else {
> + dev_dbg(&pdev->dev, "Telemetry SSRAM: %pR\n", res);
> + pmcdev.telem_base = res;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * intel_pmc_s0ix_counter_read() - Read S0ix residency.
What is residency?
> + * @data: Out param that contains current S0ix residency count.
> + *
> + * Return: an error code or 0 on success.
> + */
> +int intel_pmc_s0ix_counter_read(u64 *data)
> +{
> + u64 deep, shlw;
> +
> + if (!pmcdev.gcr_mem_base)
> + return -EACCES;
Again, is this possible?
> + deep = gcr_data_readq(PMC_GCR_TELEM_DEEP_S0IX_REG);
Can this fail?
> + shlw = gcr_data_readq(PMC_GCR_TELEM_SHLW_S0IX_REG);
Cant this fail?
> + *data = S0IX_RESIDENCY_IN_USECS(deep, shlw);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(intel_pmc_s0ix_counter_read);
What calls this?
> +static const struct acpi_device_id intel_pmc_acpi_ids[] = {
> + { "INT34D2", 0},
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, intel_pmc_acpi_ids);
> +
> +static int intel_pmc_probe(struct platform_device *pdev)
> +{
> + struct intel_scu_ipc_pdata pdata;
Can we request this dynamically please?
> + struct intel_scu_ipc_dev *scu;
> + int ret;
> +
> + memset(&pdata, 0, sizeof(pdata));
> + pdata.irq = platform_get_irq(pdev, 0);
> + if (pdata.irq < 0)
> + return -EINVAL;
> +
> + pmcdev.dev = &pdev->dev;
Same for pmcdev.
> + spin_lock_init(&pmcdev.gcr_lock);
> +
> + ret = pmc_plat_get_res(pdev, &pdata);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to request resource\n");
"resources"
> + return ret;
> + }
> +
> + scu = intel_scu_ipc_probe(&pdev->dev, &pdata);
This is a parent or child device?
> + if (IS_ERR(scu))
> + return PTR_ERR(scu);
> +
> + platform_set_drvdata(pdev, scu);
> +
> + ret = pmc_create_devices();
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to create pmc devices\n");
> + goto err_ipc;
> + }
> +
> + return 0;
> +
> +err_ipc:
> + intel_scu_ipc_remove(scu);
> +
> + return ret;
> +}
> +
> +static int intel_pmc_remove(struct platform_device *pdev)
> +{
> + intel_scu_ipc_remove(platform_get_drvdata(pdev));
> + pmcdev.dev = NULL;
> + return 0;
> +}
> +
> +static struct platform_driver intel_pmc_driver = {
> + .remove = intel_pmc_remove,
> + .probe = intel_pmc_probe,
> + .driver = {
> + .name = "intel_pmc_bxt",
> + .acpi_match_table = ACPI_PTR(intel_pmc_acpi_ids),
> + .dev_groups = intel_pmc_groups,
> + },
> +};
> +
> +static int __init intel_pmc_init(void)
> +{
> + return platform_driver_register(&intel_pmc_driver);
> +}
> +
> +static void __exit intel_pmc_exit(void)
> +{
> + platform_driver_unregister(&intel_pmc_driver);
> +}
> +
> +MODULE_AUTHOR("Zha Qipeng <qipeng.zha@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Intel Broxton PMC driver");
> +MODULE_LICENSE("GPL v2");
> +
> +/* Some modules are dependent on this, so init earlier */
> +fs_initcall(intel_pmc_init);
Prefer if you didn't have to rely on this.
Can you use -EPROBE_DEFER instead?
> +module_exit(intel_pmc_exit);
[...]
> diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/include/linux/mfd/intel_pmc_bxt.h
> similarity index 83%
> rename from arch/x86/include/asm/intel_pmc_ipc.h
> rename to include/linux/mfd/intel_pmc_bxt.h
> index 22848df5faaf..f03a80df0728 100644
> --- a/arch/x86/include/asm/intel_pmc_ipc.h
> +++ b/include/linux/mfd/intel_pmc_bxt.h
Need to review this too.
> @@ -1,6 +1,9 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -#ifndef _ASM_X86_INTEL_PMC_IPC_H_
> -#define _ASM_X86_INTEL_PMC_IPC_H_
> +#ifndef MFD_INTEL_PMC_BXT_H
> +#define MFD_INTEL_PMC_BXT_H
> +
> +#include <linux/errno.h>
> +#include <linux/types.h>
>
> /* Commands */
> #define PMC_IPC_USB_PWR_CTRL 0xF0
> @@ -25,7 +28,7 @@
> #define PMC_GCR_TELEM_DEEP_S0IX_REG 0x78
> #define PMC_GCR_TELEM_SHLW_S0IX_REG 0x80
>
> -#if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
> +#if IS_ENABLED(CONFIG_MFD_INTEL_PMC_BXT)
>
> int intel_pmc_s0ix_counter_read(u64 *data);
> int intel_pmc_gcr_read64(u32 offset, u64 *data);
> @@ -42,6 +45,6 @@ static inline int intel_pmc_gcr_read64(u32 offset, u64 *data)
> return -EINVAL;
> }
>
> -#endif /*CONFIG_INTEL_PMC_IPC*/
> +#endif /* CONFIG_MFD_INTEL_PMC_BXT */
>
> #endif
--
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog