Re: [PATCH v11 2/4] uacce: add uacce driver

From: Greg Kroah-Hartman
Date: Tue Jan 14 2020 - 09:59:41 EST


On Mon, Jan 13, 2020 at 11:34:55AM +0800, zhangfei wrote:
> Hi, Greg
>
> Thanks for the review.
>
> On 2020/1/12 äå3:40, Greg Kroah-Hartman wrote:
> > On Sat, Jan 11, 2020 at 10:48:37AM +0800, Zhangfei Gao wrote:
> > > +static int uacce_fops_open(struct inode *inode, struct file *filep)
> > > +{
> > > + struct uacce_mm *uacce_mm = NULL;
> > > + struct uacce_device *uacce;
> > > + struct uacce_queue *q;
> > > + int ret = 0;
> > > +
> > > + uacce = xa_load(&uacce_xa, iminor(inode));
> > > + if (!uacce)
> > > + return -ENODEV;
> > > +
> > > + if (!try_module_get(uacce->parent->driver->owner))
> > > + return -ENODEV;
> > Why are you trying to grab the module reference of the parent device?
> > Why is that needed and what is that going to help with here?
> >
> > This shouldn't be needed as the module reference of the owner of the
> > fileops for this module is incremented, and the "parent" module depends
> > on this module, so how could it be unloaded without this code being
> > unloaded?
> >
> > Yes, if you build this code into the kernel and the "parent" driver is a
> > module, then you will not have a reference, but when you remove that
> > parent driver the device will be removed as it has to be unregistered
> > before that parent driver can be removed from the system, right?
> >
> > Or what am I missing here?
> The refcount here is preventing rmmod "parent" module after fd is opened,
> since user driver has mmap kernel memory to user space, like mmio, which may
> still in-use.
>
> With the refcount protection, rmmod "parent" module will fail until
> application free the fd.
> log like: rmmod: ERROR: Module hisi_zip is in use

But if the "parent" module is to be unloaded, it has to unregister the
"child" device and that will call the destructor in here and then you
will tear everything down and all should be good.

There's no need to "forbid" a module from being unloaded, even if it is
being used. Look at all networking drivers, they work that way, right?

> > > +static void uacce_release(struct device *dev)
> > > +{
> > > + struct uacce_device *uacce = to_uacce_device(dev);
> > > +
> > > + kfree(uacce);
> > > + uacce = NULL;
> > That line didn't do anything :)
> Yes, this is a mistake.
> It is up to caller to set to NULL to prevent release multi times.

Release function is called by the driver core which will not touch the
value again.

thanks,

greg k-h