[RFC PATCH 4/5] Documentation/admin-guide/mm: Add a document for DAMON

From: SeongJae Park
Date: Fri Jan 10 2020 - 08:16:19 EST


From: SeongJae Park <sjpark@xxxxxxxxx>

This commit adds a simple document for DAMON under
'Documentation/admin-guide/mm/'.

Signed-off-by: SeongJae Park <sjpark@xxxxxxxxx>
---
.../admin-guide/mm/data_access_monitor.rst | 235 ++++++++++++++++++
Documentation/admin-guide/mm/index.rst | 1 +
2 files changed, 236 insertions(+)
create mode 100644 Documentation/admin-guide/mm/data_access_monitor.rst

diff --git a/Documentation/admin-guide/mm/data_access_monitor.rst b/Documentation/admin-guide/mm/data_access_monitor.rst
new file mode 100644
index 000000000000..907a7af75f35
--- /dev/null
+++ b/Documentation/admin-guide/mm/data_access_monitor.rst
@@ -0,0 +1,235 @@
+.. _data_access_monitor:
+
+==========================
+DAMON: Data Access MONitor
+==========================
+
+
+Too Long; Don't Read
+====================
+
+DAMON is a kernel module that allows users to monitor the actual memory access
+pattern of specific user-space processes. It aims to be 1) accurate enough to
+be useful for performance-centric domains, and 2) sufficiently light-weight so
+that it can be applied online.
+
+For the goals, DAMON utilizes its two core mechanisms, called region-based
+sampling and adaptive regions adjustment. The region-based sampling allows
+users to make their own trade-off between the quality and the overhead of the
+monitoring and set the upperbound of the monitoring overhead. Further, the
+adaptive regions adjustment mechanism makes DAMON to maximize the quality and
+minimize the overhead with its best efforts while preserving the users
+configured trade-off.
+
+
+Background
+==========
+
+For performance-centric analysis and optimizations of memory management schemes
+(either that of kernel space or user space), the actual data access pattern of
+the workloads is highly useful. The information need to be only reasonable
+rather than strictly correct, because some level of incorrectness can be
+handled in many performance-centric domains. It also need to be taken within
+reasonably short time with only light-weight overhead.
+
+Manually extracting such data is not easy and time consuming if the target
+workload is huge and complex, even for the developers of the programs. There
+are a range of tools and techniques developed for general memory access
+investigations, and some of those could be partially used for this purpose.
+However, most of those are not practical or unscalable, mainly because those
+are designed with no consideration about the trade-off between the accuracy of
+the output and the overhead.
+
+The memory access instrumentation techniques which is applied to many tools
+such as Intel PIN is essential for correctness required cases such as invalid
+memory access bug detections. However, those usually incur high overhead which
+is unacceptable for many of the performance-centric domains. Periodic access
+checks based on H/W or S/W access counting features (e.g., the Accessed bits of
+PTEs or the PG_Idle flags of pages) can dramatically decrease the overhead by
+forgiving some of the quality, compared to the instrumentation based
+techniques. The reduced quality is still reasonable for many of the domains,
+but the overhead can arbitrarily increase as the size of the target workload
+grows. Miniature-like static region based sampling can set the upperbound of
+the overhead, but it will now decrease the quality of the output as the size of
+the workload grows.
+
+
+Expected Use-cases
+==================
+
+A straightforward usecase of DAMON would be the program behavior analysis.
+With the DAMON output, users can confirm whether the program is running as
+intended or not. This will be useful for debuggings and tests of design
+points.
+
+The monitored results can also be useful for counting the dynamic working set
+size of workloads. For the administration of memory overcommitted systems or
+selection of the environments (e.g., containers providing different amount of
+memory) for your workloads, this will be useful.
+
+If you are a programmer, you can optimize your program by managing the memory
+based on the actual data access pattern. For example, you can identify the
+dynamic hotness of your data using DAMON and call ``mlock()`` to keep your hot
+data in DRAM, or call ``madvise()`` with ``MADV_PAGEOUT`` to proactively
+reclaim cold data. Even though your program is guaranteed to not encounter
+memory pressure, you can still improve the performance by applying the DAMON
+outputs for call of ``MADV_HUGEPAGE`` and ``MADV_NOHUGEPAGE``. More creative
+optimizations would be possible. Our evaluations of DAMON includes a
+straightforward optimization using the ``mlock()``. Please refer to the below
+Evaluation section for more detail.
+
+As DAMON incurs very low overhead, such optimizations can be applied not only
+offline, but also online. Also, there is no reason to limit such optimizations
+to the user space. Several parts of the kernel's memory management mechanisms
+could be also optimized using DAMON. The reclamation, the THP (de)promotion
+decisions, and the compaction would be such a candidates.
+
+
+Mechanisms of DAMON
+===================
+
+
+Basic Access Check
+------------------
+
+DAMON basically reports what pages are how frequently accessed. The report is
+passed to users in binary format via a ``result file`` which users can set it's
+path. Note that the frequency is not an absolute number of accesses, but a
+relative frequency among the pages of the target workloads.
+
+Users can also control the resolution of the reports by setting two time
+intervals, ``sampling interval`` and ``aggregation interval``. In detail,
+DAMON checks access to each page per ``sampling interval``, aggregates the
+results (counts the number of the accesses to each page), and reports the
+aggregated results per ``aggregation interval``. For the access check of each
+page, DAMON uses the Accessed bits of PTEs.
+
+This is thus similar to the previously mentioned periodic access checks based
+mechanisms, which overhead is increasing as the size of the target process
+grows.
+
+
+Region Based Sampling
+---------------------
+
+To avoid the unbounded increase of the overhead, DAMON groups a number of
+adjacent pages that assumed to have same access frequencies into a region. As
+long as the assumption (pages in a region have same access frequencies) is
+kept, only one page in the region is required to be checked. Thus, for each
+``sampling interval``, DAMON randomly picks one page in each region and clears
+its Accessed bit. After one more ``sampling interval``, DAMON reads the
+Accessed bit of the page and increases the access frequency of the region if
+the bit has set meanwhile. Therefore, the monitoring overhead is controllable
+by setting the number of regions. DAMON allows users to set the minimal and
+maximum number of regions for the trade-off.
+
+Except the assumption, this is almost same with the above-mentioned
+miniature-like static region based sampling. In other words, this scheme
+cannot preserve the quality of the output if the assumption is not guaranteed.
+
+
+Adaptive Regions Adjustment
+---------------------------
+
+At the beginning of the monitoring, DAMON constructs the initial regions by
+evenly splitting the memory mapped address space of the process into the
+user-specified minimal number of regions. In this initial state, the
+assumption is normally not kept and thus the quality could be low. To keep the
+assumption as much as possible, DAMON adaptively merges and splits each region.
+For each ``aggregation interval``, it compares the access frequencies of
+adjacent regions and merges those if the frequency difference is small. Then,
+after it reports and clears the aggregated access frequency of each region, it
+splits each region into two regions if the total number of regions is smaller
+than the half of the user-specified maximum number of regions.
+
+In this way, DAMON provides its best-effort quality and minimal overhead while
+keeping the bounds users set for their trade-off.
+
+
+Applying Dynamic Memory Mappings
+--------------------------------
+
+Only a number of small parts in the super-huge virtual address space of the
+processes is mapped to physical memory and accessed. Thus, tracking the
+unmapped address regions is just wasteful. However, tracking every memory
+mapping change might incur an overhead. For the reason, DAMON applies the
+dynamic memory mapping changes to the tracking regions only for each of an
+user-specified time interval (``regions update interval``).
+
+
+User Interface
+==============
+
+DAMON exports three files, ``attrs``, ``pids``, and ``monitor_on`` under its
+debugfs directory, ``<debugfs>/damon/``.
+
+
+Attributes
+----------
+
+Users can read and write the ``sampling interval``, ``aggregation interval``,
+``regions update interval``, min/max number of regions, and the path to
+``result file`` by reading from and writing to the ``attrs`` file. For
+example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000,
+and ``/damon.data`` and check it again::
+
+ # cd <debugfs>/damon
+ # echo 5000 100000 1000000 10 1000 /damon.data > attrs
+ # cat attrs
+ 5000 100000 1000000 10 1000 /damon.data
+
+
+Target PIDs
+-----------
+
+Users can read and write the pids of current monitoring target processes by
+reading from and writing to the `pids` file. For example, below commands set
+processes having pids 42 and 4242 as the processes to be monitored and check
+it again::
+
+ # cd <debugfs>/damon
+ # echo 42 4242 > pids
+ # cat pids
+ 42 4242
+
+Note that setting the pids doesn't starts the monitoring.
+
+
+Turning On/Off
+--------------
+
+You can check current status, start and stop the monitoring by reading from and
+writing to the ``monitor_on`` file. Writing ``on`` to the file starts DAMON to
+monitor the target processes with the attributes. Writing ``off`` to the file
+stops DAMON. DAMON also stops if every target processes is be terminated.
+Below example commands turn on, off, and check status of DAMON::
+
+ # cd <debugfs>/damon
+ # echo on > monitor_on
+ # echo off > monitor_on
+ # cat monitor_on
+ off
+
+Please note that you cannot write to the ``attrs`` and ``pids`` files while the
+monitoring is turned on. If you write to the files while DAMON is running,
+``-EINVAL`` will be returned.
+
+
+User Space Wrapper
+------------------
+
+DAMON has a shallow wrapper python script, ``/tools/damon/damn`` that provides
+more convenient interface. Note that it is only aimed to be used for minimal
+reference of the DAMON's raw interfaces and for debugging of the DAMON itself.
+Based on the debugfs interface, you can create another cool and more convenient
+user space tools.
+
+
+Quick Tutorial
+--------------
+
+To test DAMON on your system,
+
+1. Ensure your kernel is built with CONFIG_DAMON turned on, and debugfs is
+ mounted at ``/sys/kernel/debug/``.
+2. ``<your kernel source tree>/tools/damon/damn -h``
diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst
index 11db46448354..d3d0ba373eb6 100644
--- a/Documentation/admin-guide/mm/index.rst
+++ b/Documentation/admin-guide/mm/index.rst
@@ -27,6 +27,7 @@ the Linux memory management.

concepts
cma_debugfs
+ data_access_monitor
hugetlbpage
idle_page_tracking
ksm
--
2.17.1