Re: [PATCH 2/2] arm64: dts: mediatek: add mt8173 elm and hana board

From: Hsin-Yi Wang
Date: Thu Jan 09 2020 - 23:47:29 EST


On Thu, Jan 9, 2020 at 11:11 PM Enric Balletbo i Serra
<enric.balletbo@xxxxxxxxxxxxx> wrote:
>
> Hi Hsin-Yi,
>
> Many thanks for sending the patch upstream, some comments below ...
>
Thanks for the comments. I will fix up in next version.
> On 9/1/20 11:10, Hsin-Yi Wang wrote:
> > Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173
> > SoC.
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> > ---
> > This depends on parade bridge ps8640, the driver's status is:
> > https://patchwork.kernel.org/cover/11312747/
> > ---
> > arch/arm64/boot/dts/mediatek/Makefile | 3 +
> > .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 +
> > .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 +
> > .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 53 +
> > arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 +
> > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1069 +++++++++++++++++
> > 6 files changed, 1183 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> > index 458bbc422a94..ee7aadc94dc6 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -7,4 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
>
> Alphabetical order, so those three before mt8173-evb.dtb
>
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
> > new file mode 100644
> > index 000000000000..a3616bc3d859
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
> > @@ -0,0 +1,27 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright 2019 MediaTek Inc.
> > + */
> > +
> > +/dts-v1/;
> > +#include "mt8173-elm-hana.dtsi"
> > +
> > +/ {
> > + model = "Mediatek Hana rev7 board";
> > + compatible = "google,hana-rev7", "mediatek,mt8173";
> > +};
> > +
> > +&cpu_thermal {
> > + trips {
> > + cpu_crit: cpu_crit@0 {
> > + temperature = <100000>;
> > + type = "critical";
> > + };
> > + };
> > +};
> > +
> > +&gpio_keys {
> > + /delete-node/tablet_mode;
> > + /delete-node/volume_down;
> > + /delete-node/volume_up;
> > +};
> > \ No newline at end of file
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
> > new file mode 100644
> > index 000000000000..8cbcc75192e3
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
> > @@ -0,0 +1,16 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright 2016 MediaTek Inc.
> > + */
> > +
> > +/dts-v1/;
> > +#include "mt8173-elm-hana.dtsi"
> > +
> > +/ {
> > + model = "Mediatek Hana rev0 board";
> > + compatible = "google,hana-rev6",
> > + "google,hana-rev5", "google,hana-rev4",
> > + "google,hana-rev3", "google,hana-rev2",
> > + "google,hana-rev1", "google,hana-rev0",
> > + "google,hana", "mediatek,mt8173";
> > +};
> > \ No newline at end of file
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
> > new file mode 100644
> > index 000000000000..26de3133c1b7
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
> > @@ -0,0 +1,53 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright 2016 MediaTek Inc.
> > + */
> > +
> > +#include "mt8173-elm.dtsi"
> > +
> > +&i2c_tunnel {
> > + google,limited-passthrough;
>
> I don't think this exists in mainline. In such case you should remove this.
>
> > +};
> > +
> > +&i2c0 {
> > + clock-frequency = <200000>;
> > +};
> > +
> > +&i2c3 {
> > + touchscreen2: touchscreen@34 {
> > + compatible = "melfas,mip4_ts";
> > + reg = <0x34>;
> > + interrupt-parent = <&pio>;
> > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
> > + };
>
> Hmm, so the same Hana revision can go with up to different touchscreens models?
>
Partners wants to increase touchpad and touchscreen source (they
choose synaptics) for hana 300e, and synaptics uses hid-over-i2c
driver.

> > +
> > + touchscreen3: touchscreen@20 {
> > + compatible = "hid-over-i2c";
> > + reg = <0x20>;
> > + hid-descr-addr = <0x0020>;
> > + interrupt-parent = <&pio>;
> > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +};
> > +
> > +&mmc1 {
> > + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
> > +};
> > +
> > +&pio {
> > + hdmi_mux_pins: hdmi_mux_pins {
> > + pins2 {
> > + pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>;
> > + bias-pull-up;
> > + output-high;
> > + };
> > + };
> > +
> > + mmc1_pins_default: mmc1default {
> > + pins_wp {
> > + pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>;
> > + input-enable;
> > + bias-pull-up;
> > + };
> > + };
> > +};
> > \ No newline at end of file
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
> > new file mode 100644
> > index 000000000000..e5da2355760e
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
> > @@ -0,0 +1,15 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright 2016 MediaTek Inc.
> > + */
> > +
> > +/dts-v1/;
> > +#include "mt8173-elm.dtsi"
> > +
> > +/ {
> > + model = "Mediatek Elm board";
> > + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6",
> > + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3",
> > + "google,elm-rev2", "google,elm-rev1",
> > + "google,elm", "mediatek,mt8173";
> > +};
> > \ No newline at end of file
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > new file mode 100644
> > index 000000000000..fca631e88d58
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > @@ -0,0 +1,1069 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright 2016 MediaTek Inc.
> > + */
> > +
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include "mt8173.dtsi"
> > +
> > +/ {
> > + aliases {
> > + serial0 = &uart0;
> > + serial1 = &uart1;
> > + serial2 = &uart2;
> > + serial3 = &uart3;
> > + };
> > +
> > + memory@40000000 {
> > + device_type = "memory";
> > + reg = <0 0x40000000 0 0x80000000>;
> > + };
> > +
> > + backlight_lcd: backlight_lcd {
> > + compatible = "pwm-backlight";
> > + pwms = <&pwm0 0 1000000>;
> > + brightness-levels = <
> > + 0 16 32 48 64 80 96 112
> > + 128 144 160 176 192 208 224 240
> > + 255
> > + >;
> > + default-brightness-level = <9>;
>
> Actually if you don't specify the brightness-levels and the
> default-brightness-level the pwm-backlight driver computes a table of levels and
> probably you'll have more granularity, did you try to just remove those properties?
>
If we remove brightness-levels, minimum brightness that can be set
from UI would make the screen too dark to see anything.
>
> > + power-supply = <&bl_fixed_reg>;
> > + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&disp_pwm0_pins>;
> > + status = "okay";
> > + };
> > +
> > + bl_fixed_reg: fixedregulator@2 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "bl_fixed";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + startup-delay-us = <1000>;
> > + enable-active-high;
> > + gpio = <&pio 32 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&bl_fixed_pins>;
> > + };
> > +
> > + chosen {
> > + stdout-path = &uart0;
> > + };
> > +
> > + firmware {
> > + chromeos {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&chromeos_write_protect>;
> > + write-protect-gpio = <&pio 4 GPIO_ACTIVE_LOW>;
> > + };
> > + };
> > +
>
> This is not upstream, so you can remove it.
>
> > + gpio_keys: gpio-keys {
> > + compatible = "gpio-keys";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&gpio_keys_pins>;
> > +
> > + lid {
> > + label = "Lid";
> > + gpios = <&pio 69 GPIO_ACTIVE_LOW>;
> > + linux,code = <0>; /* SW_LID */
> > + linux,input-type = <5>; /* EV_SW */
> > + gpio-key,wakeup;
> > + };
> > +
> > + power {
> > + label = "Power";
> > + gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
> > + linux,code = <KEY_POWER>;
> > + debounce-interval = <30>;
> > + gpio-key,wakeup;
> > + };
> > +
> > + tablet_mode {
> > + label = "Tablet_mode";
> > + gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
> > + linux,code = <1>; /* SW_TABLET_MODE */
> > + linux,input-type = <5>; /* EV_SW */
> > + gpio-key,wakeup;
> > + };
> > +
> > + volume_down {
> > + label = "Volume_down";
> > + gpios = <&pio 123 GPIO_ACTIVE_LOW>;
> > + linux,code = <KEY_VOLUMEDOWN>;
> > + };
> > +
> > + volume_up {
> > + label = "Volume_up";
> > + gpios = <&pio 124 GPIO_ACTIVE_LOW>;
> > + linux,code = <KEY_VOLUMEUP>;
> > + };
> > + };
> > +
> > + panel: panel {
> > + compatible = "lg,lp120up1";
> > + power-supply = <&panel_fixed_3v3>;
> > + ddc-i2c-bus = <&i2c0>;
> > + backlight = <&backlight_lcd>;
> > +
> > + port {
> > + panel_in: endpoint {
> > + remote-endpoint = <&ps8640_out>;
> > + };
> > + };
> > + };
> > +
> > + panel_fixed_3v3: regulator@1 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "PANEL_3V3";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + enable-active-high;
> > + gpio = <&pio 41 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&panel_fixed_pins>;
> > + };
> > +
> > + ps8640_fixed_1v2: regulator@2 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "PS8640_1V2";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-enable-ramp-delay = <2000>;
> > + enable-active-high;
> > + regulator-boot-on;
> > + gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&ps8640_fixed_pins>;
> > + };
> > +
> > + sdio_fixed_3v3: fixedregulator@0 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "3V3";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + sound: sound {
> > + compatible = "mediatek,mt8173-rt5650";
> > + mediatek,audio-codec = <&rt5650 &hdmi0>;
> > + mediatek,platform = <&afe>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&aud_i2s2>;
> > +
> > + mediatek,mclk = <1>;
> > + codec-capture {
> > + sound-dai = <&rt5650 1>;
> > + };
> > + };
> > +
> > + hdmicon: connector {
> > + compatible = "hdmi-connector";
> > + label = "hdmi";
> > + type = "a";
> > + ddc-i2c-bus = <&hdmiddc0>;
> > +
> > + port {
> > + hdmi_connector_in: endpoint {
> > + remote-endpoint = <&hdmi0_out>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&cec {
> > + status = "okay";
> > +};
> > +
> > +&cpu0 {
> > + proc-supply = <&mt6397_vpca15_reg>;
> > +};
> > +
> > +&cpu1 {
> > + proc-supply = <&mt6397_vpca15_reg>;
> > +};
> > +
> > +&cpu2 {
> > + proc-supply = <&da9211_vcpu_reg>;
> > + sram-supply = <&mt6397_vsramca7_reg>;
> > +};
> > +
> > +&cpu3 {
> > + proc-supply = <&da9211_vcpu_reg>;
> > + sram-supply = <&mt6397_vsramca7_reg>;
> > +};
> > +
> > +&cpu_thermal {
> > + sustainable-power = <4500>; /* milliwatts */
> > + trips {
> > + threshold: trip-point@0 {
> > + temperature = <60000>;
> > + };
> > +
> > + target: trip-point@1 {
> > + temperature = <65000>;
> > + };
> > + };
> > +};
> > +
> > +&dsi0 {
> > + status = "okay";
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + dsi0_out: endpoint {
> > + remote-endpoint = <&ps8640_in>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&dpi0 {
> > + status = "okay";
> > +};
> > +
> > +&hdmi0 {
> > + status = "okay";
> > + ports {
> > + port@1 {
> > + reg = <1>;
> > +
> > + hdmi0_out: endpoint {
> > + remote-endpoint = <&hdmi_connector_in>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&hdmi_phy {
> > + status = "okay";
> > + mediatek,ibias = <0xc>;
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > +
> > + rt5650: audio-codec@1a {
> > + compatible = "realtek,rt5650";
> > + reg = <0x1a>;
> > + avdd-supply = <&mt6397_vgp1_reg>;
> > + cpvdd-supply = <&mt6397_vcama_reg>;
> > + interrupt-parent = <&pio>;
> > + interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&rt5650_irq>;
> > + #sound-dai-cells = <1>;
> > + realtek,dmic1-data-pin = <2>;
> > + realtek,jd-mode = <2>;
> > + };
> > +
> > + ps8640: edp-bridge@8 {
> > + compatible = "parade,ps8640";
> > + reg = <0x8>;
> > + powerdown-gpios = <&pio 127 GPIO_ACTIVE_HIGH>;
>
> This should be GPIO_ACTIVE_LOW with latest version of the driver sent.
>
> > + reset-gpios = <&pio 115 GPIO_ACTIVE_HIGH>;
>
> Same here, GPIO_ACTIVE_LOW.
>
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&ps8640_pins>;
> > + vdd12-supply = <&ps8640_fixed_1v2>;
> > + vdd33-supply = <&mt6397_vgp2_reg>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + ps8640_in: endpoint {
> > + remote-endpoint = <&dsi0_out>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + ps8640_out: endpoint {
> > + remote-endpoint = <&panel_in>;
> > + };
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c1 {
> > + clock-frequency = <1500000>;
> > + status = "okay";
> > +
> > + da9211: da9211@68 {
> > + compatible = "dlg,da9211";
> > + reg = <0x68>;
> > +
> > + regulators {
> > + da9211_vcpu_reg: BUCKA {
> > + regulator-name = "VBUCKA";
> > + regulator-min-microvolt = < 700000>;
> > + regulator-max-microvolt = <1310000>;
> > + regulator-min-microamp = <2000000>;
> > + regulator-max-microamp = <4400000>;
> > + regulator-ramp-delay = <10000>;
> > + regulator-always-on;
> > + regulator-allowed-modes = <0 1>;
> > + };
> > +
> > + da9211_vgpu_reg: BUCKB {
> > + regulator-name = "VBUCKB";
> > + regulator-min-microvolt = < 700000>;
> > + regulator-max-microvolt = <1310000>;
> > + regulator-min-microamp = <2000000>;
> > + regulator-max-microamp = <3000000>;
> > + regulator-ramp-delay = <10000>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c2 {
> > + status = "okay";
> > +
> > + tpm: tpm@20 {
> > + compatible = "infineon,slb9645tt";
> > + reg = <0x20>;
> > + powered-while-suspended;
> > + };
> > +};
> > +
> > +&i2c3 {
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +
> > + touchscreen: touchscreen@10 {
> > + compatible = "elan,ekth3500";
> > + reg = <0x10>;
> > + interrupt-parent = <&pio>;
> > + interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +};
> > +
> > +&i2c4 {
> > + clock-frequency = <400000>;
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&trackpad_irq>;
> > +
> > + trackpad: trackpad@15 {
> > + compatible = "elan,ekth3000";
> > + interrupt-parent = <&pio>;
> > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
> > + reg = <0x15>;
> > + vcc-supply = <&mt6397_vgp6_reg>;
> > + wakeup-source;
> > + };
> > +
> > + trackpad2: trackpad@2c {
> > + compatible = "hid-over-i2c";
> > + interrupt-parent = <&pio>;
> > + interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
> > + reg = <0x2c>;
> > + hid-descr-addr = <0x0020>;
> > + wakeup-source;
> > + };
>
> So two trackpad models for the same ELM revision?
>
This is for hana 300e only, I'll move it to mt8173-elm-hana.dts
> > +};
> > +
> > +&mipi_tx0 {
> > + status = "okay";
> > +};
> > +
> > +&mmc0 {
> > + status = "okay";
> > + pinctrl-names = "default", "state_uhs";
> > + pinctrl-0 = <&mmc0_pins_default>;
> > + pinctrl-1 = <&mmc0_pins_uhs>;
> > + bus-width = <8>;
> > + max-frequency = <200000000>;
> > + cap-mmc-highspeed;
> > + mmc-hs200-1_8v;
> > + mmc-hs400-1_8v;
> > + cap-mmc-hw-reset;
> > + hs400-ds-delay = <0x14015>;
> > + mediatek,hs200-cmd-int-delay=<30>;
> > + mediatek,hs400-cmd-int-delay=<14>;
> > + mediatek,hs400-cmd-resp-sel-rising;
> > + vmmc-supply = <&mt6397_vemc_3v3_reg>;
> > + vqmmc-supply = <&mt6397_vio18_reg>;
> > + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
> > + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
> > + non-removable;
> > +};
> > +
> > +&mmc1 {
> > + status = "okay";
> > + pinctrl-names = "default", "state_uhs";
> > + pinctrl-0 = <&mmc1_pins_default>;
> > + pinctrl-1 = <&mmc1_pins_uhs>;
> > + bus-width = <4>;
> > + max-frequency = <200000000>;
> > + cap-sd-highspeed;
> > + sd-uhs-sdr50;
> > + sd-uhs-sdr104;
> > + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
> > + vmmc-supply = <&mt6397_vmch_reg>;
> > + vqmmc-supply = <&mt6397_vmc_reg>;
> > +};
> > +
> > +&mmc3 {
> > + status = "okay";
> > + pinctrl-names = "default", "state_uhs";
> > + pinctrl-0 = <&mmc3_pins_default>;
> > + pinctrl-1 = <&mmc3_pins_uhs>;
> > + bus-width = <4>;
> > + max-frequency = <200000000>;
> > + cap-sd-highspeed;
> > + sd-uhs-sdr50;
> > + sd-uhs-sdr104;
> > + sdr104-clk-delay = <5>;
> > + keep-power-in-suspend;
> > + enable-sdio-wakeup;
> > + cap-sdio-irq;
> > + vmmc-supply = <&sdio_fixed_3v3>;
> > + vqmmc-supply = <&mt6397_vgp3_reg>;
> > + non-removable;
> > + cap-power-off-card;
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + btmrvl: btmrvl@2 {
> > + compatible = "marvell,sd8897-bt";
> > + reg = <2>;
> > + interrupt-parent = <&pio>;
> > + interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
> > + marvell,wakeup-pin = /bits/ 16 <0x0d>;
> > + marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
> > + };
> > +
> > + mwifiex: mwifiex@1 {
> > + compatible = "marvell,sd8897";
> > + reg = <1>;
> > + interrupt-parent = <&pio>;
> > + interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
> > + marvell,wakeup-pin = <3>;
> > + marvell,caldata_ed_mac = /bits/ 8 <
> > +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00
> > +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00
> > + >;
> > + };
> > +};
> > +
> > +&nor_flash {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&nor_gpio1_pins>;
> > + bus-width = <8>;
> > + max-frequency = <50000000>;
> > + non-removable;
> > + flash@0 {
> > + compatible = "jedec,spi-nor";
> > + reg = <0>;
> > + };
> > +};
> > +
> > +&pio {
> > + aud_i2s2: aud_i2s2 {
> > + pins1 {
> > + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>,
> > + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>,
> > + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>,
> > + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>,
> > + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>,
> > + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>,
> > + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>;
> > + bias-pull-down;
> > + };
> > + };
> > +
> > + bl_fixed_pins: bl_fixed_pins {
> > + pins1 {
> > + pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>;
> > + output-low;
> > + };
> > + };
> > +
> > + bt_wake_pins: bt_wake_pins {
> > + pins1 {
> > + pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>;
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + chromeos_write_protect: chromeos_write_protect {
> > + pins1 {
> > + pinmux = <MT8173_PIN_4_EINT4__FUNC_GPIO4>;
> > + bias-disable;
> > + };
> > + };
> > +
>
> I don't think this is needed.
>
>
> > + disp_pwm0_pins: disp_pwm0_pins {
> > + pins1 {
> > + pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
> > + output-low;
> > + };
> > + };
> > +
> > + gpio_keys_pins: gpio_keys_pins {
> > + volume_pins {
> > + pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>,
> > + <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>;
> > + bias-pull-up;
> > + };
> > +
> > + tablet_mode_pins {
> > + pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>;
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + hdmi_mux_pins: hdmi_mux_pins {
> > + pins1 {
> > + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>;
> > + };
> > + };
> > +
> > + mmc0_pins_default: mmc0default {
> > + pins_cmd_dat {
> > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
> > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
> > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
> > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
> > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
> > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
> > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
> > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
> > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
> > + bias-pull-up;
> > + };
> > +
> > + pins_clk {
> > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
> > + bias-pull-down;
> > + };
> > +
> > + pins_rst {
> > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + mmc1_pins_default: mmc1default {
> > + pins_cmd_dat {
> > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
> > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
> > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
> > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
> > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
> > + input-enable;
> > + drive-strength = <MTK_DRIVE_4mA>;
> > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > +
> > + pins_clk {
> > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
> > + bias-pull-down;
> > + drive-strength = <MTK_DRIVE_4mA>;
> > + };
> > +
> > + pins_insert {
> > + pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>;
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + mmc3_pins_default: mmc3default {
> > + pins_dat {
> > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
> > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
> > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
> > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
> > + input-enable;
> > + drive-strength = <MTK_DRIVE_8mA>;
> > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > +
> > + pins_cmd {
> > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
> > + input-enable;
> > + drive-strength = <MTK_DRIVE_8mA>;
> > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > +
> > + pins_clk {
> > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
> > + bias-pull-down;
> > + drive-strength = <MTK_DRIVE_8mA>;
> > + };
> > +
> > + pins_pdn {
> > + pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>;
> > + output-low;
> > + };
> > + };
> > +
> > + mmc0_pins_uhs: mmc0 {
> > + pins_cmd_dat {
> > + pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
> > + <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
> > + <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
> > + <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
> > + <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
> > + <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
> > + <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
> > + <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
> > + <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
> > + input-enable;
> > + drive-strength = <MTK_DRIVE_6mA>;
> > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> > + };
> > +
> > + pins_clk {
> > + pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
> > + drive-strength = <MTK_DRIVE_6mA>;
> > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
> > + };
> > +
> > + pins_ds {
> > + pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>;
> > + drive-strength = <MTK_DRIVE_10mA>;
> > + bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
> > + };
> > +
> > + pins_rst {
> > + pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + mmc1_pins_uhs: mmc1 {
> > + pins_cmd_dat {
> > + pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
> > + <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
> > + <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
> > + <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
> > + <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
> > + input-enable;
> > + drive-strength = <MTK_DRIVE_6mA>;
> > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > +
> > + pins_clk {
> > + pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
> > + drive-strength = <MTK_DRIVE_8mA>;
> > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > + };
> > +
> > + mmc3_pins_uhs: mmc3 {
> > + pins_dat {
> > + pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
> > + <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
> > + <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
> > + <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
> > + input-enable;
> > + drive-strength = <MTK_DRIVE_8mA>;
> > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > +
> > + pins_cmd {
> > + pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
> > + input-enable;
> > + drive-strength = <MTK_DRIVE_8mA>;
> > + bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > +
> > + pins_clk {
> > + pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
> > + drive-strength = <MTK_DRIVE_8mA>;
> > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > + };
> > +
> > + nor_gpio1_pins: nor {
> > + pins1 {
> > + pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>,
> > + <MT8173_PIN_7_EINT7__FUNC_SFHOLD>,
> > + <MT8173_PIN_8_EINT8__FUNC_SFIN>;
> > + input-enable;
> > + drive-strength = <MTK_DRIVE_4mA>;
> > + bias-pull-up;
> > + };
> > +
> > + pins2 {
> > + pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>;
> > + drive-strength = <MTK_DRIVE_4mA>;
> > + bias-pull-up;
> > + };
> > +
> > + pins_clk {
> > + pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>;
> > + input-enable;
> > + drive-strength = <MTK_DRIVE_4mA>;
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + panel_fixed_pins: panel_fixed_pins {
> > + pins1 {
> > + pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>;
> > + };
> > + };
> > +
> > + ps8640_pins: ps8640_pins {
> > + pins1 {
> > + pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>,
> > + <MT8173_PIN_115_URTS0__FUNC_GPIO115>,
> > + <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>;
> > + };
> > + };
> > +
> > + ps8640_fixed_pins: ps8640_fixed_pins {
> > + pins1 {
> > + pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>;
> > + };
> > + };
> > +
> > + rt5650_irq: rt5650_irq {
> > + pins1 {
> > + pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>;
> > + bias-pull-down;
> > + };
> > + };
> > +
> > + spi_pins_a: spi1 {
> > + pins1 {
> > + pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>;
> > + bias-pull-up;
> > + };
> > +
> > + pins_spi {
> > + pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>,
> > + <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>,
> > + <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>,
> > + <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>;
> > + bias-disable;
> > + };
> > + };
> > +
> > + trackpad_irq: trackpad_irq {
> > + pins1 {
> > + pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>;
> > + input-enable;
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + usb_pins: usb@0 {
> > + pins1 {
> > + pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>;
> > + output-high;
> > + bias-disable;
> > + };
> > + };
> > +
> > + wifi_wake_pins: wifi_wake_pins {
> > + pins1 {
> > + pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>;
> > + bias-pull-up;
> > + };
> > + };
> > +};
> > +
> > +&pwm0 {
> > + status = "okay";
> > +};
> > +
> > +&pwrap {
> > + pmic: mt6397 {
> > + compatible = "mediatek,mt6397";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + interrupt-parent = <&pio>;
> > + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > +
> > + mt6397rtc: mt6397rtc {
> > + compatible = "mediatek,mt6397-rtc";
> > + };
> > +
> > + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 {
> > + compatible = "mediatek,mt6397-pctl-pmic-syscfg",
> > + "syscon";
> > + reg = <0 0x0000c000 0 0x0108>;
> > + };
> > +
> > + pio6397: pinctrl@c000 {
> > + compatible = "mediatek,mt6397-pinctrl";
> > + pins-are-numbered;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + };
> > +
> > + mt6397clock: mt6397clock {
> > + compatible = "mediatek,mt6397-clk";
> > + #clock-cells = <1>;
> > + };
> > +
> > + mt6397regulator: mt6397regulator {
> > + compatible = "mediatek,mt6397-regulator";
> > +
> > + mt6397_vpca15_reg: buck_vpca15 {
> > + regulator-compatible = "buck_vpca15";
> > + regulator-name = "vpca15";
> > + regulator-min-microvolt = < 700000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <12500>;
> > + regulator-always-on;
> > + regulator-allowed-modes = <0 1>;
> > + };
> > +
> > + mt6397_vpca7_reg: buck_vpca7 {
> > + regulator-compatible = "buck_vpca7";
> > + regulator-name = "vpca7";
> > + regulator-min-microvolt = < 700000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <12500>;
> > + regulator-enable-ramp-delay = <115>;
> > + regulator-always-on;
> > + };
> > +
> > + mt6397_vsramca15_reg: buck_vsramca15 {
> > + regulator-compatible = "buck_vsramca15";
> > + regulator-name = "vsramca15";
> > + regulator-min-microvolt = < 700000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <12500>;
> > + regulator-always-on;
> > + };
> > +
> > + mt6397_vsramca7_reg: buck_vsramca7 {
> > + regulator-compatible = "buck_vsramca7";
> > + regulator-name = "vsramca7";
> > + regulator-min-microvolt = < 700000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <12500>;
> > + regulator-always-on;
> > + };
> > +
> > + mt6397_vcore_reg: buck_vcore {
> > + regulator-compatible = "buck_vcore";
> > + regulator-name = "vcore";
> > + regulator-min-microvolt = < 700000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <12500>;
> > + regulator-always-on;
> > + };
> > +
> > + mt6397_vgpu_reg: buck_vgpu {
> > + regulator-compatible = "buck_vgpu";
> > + regulator-name = "vgpu";
> > + regulator-min-microvolt = < 700000>;
> > + regulator-max-microvolt = <1350000>;
> > + regulator-ramp-delay = <12500>;
> > + regulator-enable-ramp-delay = <115>;
> > + };
> > +
> > + mt6397_vdrm_reg: buck_vdrm {
> > + regulator-compatible = "buck_vdrm";
> > + regulator-name = "vdrm";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1400000>;
> > + regulator-ramp-delay = <12500>;
> > + regulator-always-on;
> > + };
> > +
> > + mt6397_vio18_reg: buck_vio18 {
> > + regulator-compatible = "buck_vio18";
> > + regulator-name = "vio18";
> > + regulator-min-microvolt = <1620000>;
> > + regulator-max-microvolt = <1980000>;
> > + regulator-ramp-delay = <12500>;
> > + regulator-always-on;
> > + };
> > +
> > + mt6397_vtcxo_reg: ldo_vtcxo {
> > + regulator-compatible = "ldo_vtcxo";
> > + regulator-name = "vtcxo";
> > + regulator-always-on;
> > + };
> > +
> > + mt6397_va28_reg: ldo_va28 {
> > + regulator-compatible = "ldo_va28";
> > + regulator-name = "va28";
> > + };
> > +
> > + mt6397_vcama_reg: ldo_vcama {
> > + regulator-compatible = "ldo_vcama";
> > + regulator-name = "vcama";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-enable-ramp-delay = <218>;
> > + };
> > +
> > + mt6397_vio28_reg: ldo_vio28 {
> > + regulator-compatible = "ldo_vio28";
> > + regulator-name = "vio28";
> > + regulator-always-on;
> > + };
> > +
> > + mt6397_vusb_reg: ldo_vusb {
> > + regulator-compatible = "ldo_vusb";
> > + regulator-name = "vusb";
> > + };
> > +
> > + mt6397_vmc_reg: ldo_vmc {
> > + regulator-compatible = "ldo_vmc";
> > + regulator-name = "vmc";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <218>;
> > + };
> > +
> > + mt6397_vmch_reg: ldo_vmch {
> > + regulator-compatible = "ldo_vmch";
> > + regulator-name = "vmch";
> > + regulator-min-microvolt = <3000000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <218>;
> > + };
> > +
> > + mt6397_vemc_3v3_reg: ldo_vemc3v3 {
> > + regulator-compatible = "ldo_vemc3v3";
> > + regulator-name = "vemc_3v3";
> > + regulator-min-microvolt = <3000000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <218>;
> > + };
> > +
> > + mt6397_vgp1_reg: ldo_vgp1 {
> > + regulator-compatible = "ldo_vgp1";
> > + regulator-name = "vcamd";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > +
> > + mt6397_vgp2_reg: ldo_vgp2 {
> > + regulator-compatible = "ldo_vgp2";
> > + regulator-name = "vcamio";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <218>;
> > + };
> > +
> > + mt6397_vgp3_reg: ldo_vgp3 {
> > + regulator-compatible = "ldo_vgp3";
> > + regulator-name = "vcamaf";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-enable-ramp-delay = <218>;
> > + };
> > +
> > + mt6397_vgp4_reg: ldo_vgp4 {
> > + regulator-compatible = "ldo_vgp4";
> > + regulator-name = "vgp4";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <218>;
> > + };
> > +
> > + mt6397_vgp5_reg: ldo_vgp5 {
> > + regulator-compatible = "ldo_vgp5";
> > + regulator-name = "vgp5";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <3000000>;
> > + regulator-enable-ramp-delay = <218>;
> > + };
> > +
> > + mt6397_vgp6_reg: ldo_vgp6 {
> > + regulator-compatible = "ldo_vgp6";
> > + regulator-name = "vgp6";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <218>;
> > + regulator-always-on;
> > + };
> > +
> > + mt6397_vibr_reg: ldo_vibr {
> > + regulator-compatible = "ldo_vibr";
> > + regulator-name = "vibr";
> > + regulator-min-microvolt = <1300000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-enable-ramp-delay = <218>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&spi {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&spi_pins_a>;
> > + mediatek,pad-select = <1>;
> > + status = "okay";
> > + /* clients */
> > + cros_ec: ec@0 {
> > + compatible = "google,cros-ec-spi";
> > + reg = <0x0>;
> > + spi-max-frequency = <12000000>;
> > + interrupt-parent = <&pio>;
> > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> > + google,cros-ec-spi-msg-delay = <500>;
> > +
> > + i2c_tunnel: i2c-tunnel@0 {
> > + compatible = "google,cros-ec-i2c-tunnel";
> > + google,remote-bus = <0>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + battery: sbs-battery@b {
> > + compatible = "sbs,sbs-battery";
> > + reg = <0xb>;
> > + sbs,i2c-retry-count = <2>;
> > + sbs,poll-retry-count = <1>;
> > + };
> > + };
> > +
> > + i2c_tunnel_b: i2c-tunnel@1 {
> > + compatible = "google,cros-ec-i2c-tunnel";
> > + google,remote-bus = <1>;
>
> For what is used this second i2c tunnel? There is anything connected to it?
>
It's originally for anx7688. I'll remove it here.
> > + };
> > + };
> > +};
> > +
> > +&thermal {
> > + bank0-supply = <&mt6397_vpca15_reg>;
> > + bank1-supply = <&da9211_vcpu_reg>;
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > +
> > +&ssusb {
> > + dr_mode = "host";
> > + wakeup-source;
> > + vusb33-supply = <&mt6397_vusb_reg>;
> > + status = "okay";
> > +};
> > +
> > +&usb_host {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&usb_pins>;
> > + vusb33-supply = <&mt6397_vusb_reg>;
> > + status = "okay";
> > +};
> > +
> > +#include "../../../../arm/boot/dts/cros-ec-keyboard.dtsi"
> > \ No newline at end of file
> >
>
> Thanks,
> Enric