Re: [PATCH V2 3/5] PCI: tegra: Add support for PCIe endpoint mode in Tegra194

[Thierry Reding]

On Fri, Jan 03, 2020 at 06:14:02PM +0530, Vidya Sagar wrote:
> Add support for the endpoint mode of Synopsys DesignWare core based
> dual mode PCIe controllers present in Tegra194 SoC.
> 
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> ---
> V2:
> * Addressed Bjorn's review comments
> * Made changes as part of addressing review comments for other patches
> 
>  drivers/pci/controller/dwc/Kconfig         |  30 +-
>  drivers/pci/controller/dwc/pcie-tegra194.c | 782 ++++++++++++++++++++-
>  2 files changed, 796 insertions(+), 16 deletions(-)
> 
[...]
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index cbe95f0ea0ca..6621ac79efee 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
[...]
> @@ -1427,8 +1620,553 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
[...]
> +static int tegra_pcie_config_ep(struct tegra_pcie_dw *pcie,
> +				struct platform_device *pdev)
> +{
[...]
> +	ret = devm_request_irq(dev, pcie->pex_rst_irq,
> +			       tegra_pcie_ep_pex_rst_irq,
> +			       IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> +			       name, (void *)pcie);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to request IRQ for PERST: %d\n", ret);
> +		return ret;
> +	}
> +	disable_irq(pcie->pex_rst_irq);

I just came across this while reviewing another patch: it looks like a
better way to handle "disabled by default" interrupts is to do this:

	irq_set_status_flags(rtc->irq, IRQ_NOAUTOEN);

before calling devm_request_irq(). See here for an example:

	http://patchwork.ozlabs.org/patch/1217944/

Thierry

Attachment: signature.asc
Description: PGP signature