RE: [PATCH v2 0/3] net: macb: fix for fixed link, support for c45 mdio and 10G

[Parshuram Raju Thombare]

Corrected typo in email id of Nicolas Ferre.

>-----Original Message-----
>From: Milind Parab <mparab@xxxxxxxxxxx>
>Sent: Friday, December 13, 2019 3:10 PM
>To: nicolas.nerre@xxxxxxxxxxxxx; andrew@xxxxxxx;
>antoine.tenart@xxxxxxxxxxx; f.fainelli@xxxxxxxxx; rmk+kernel@xxxxxxxxxxxxxxx
>Cc: davem@xxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx; hkallweit1@xxxxxxxxx;
>linux-kernel@xxxxxxxxxxxxxxx; Dhananjay Vilasrao Kangude
><dkangude@xxxxxxxxxxx>; a.fatoum@xxxxxxxxxxxxxx; brad.mouring@xxxxxx;
>Parshuram Raju Thombare <pthombar@xxxxxxxxxxx>; Milind Parab
><mparab@xxxxxxxxxxx>
>Subject: [PATCH v2 0/3] net: macb: fix for fixed link, support for c45 mdio and
>10G
>
>This patch series applies to Cadence Ethernet MAC Controller.
>The first patch in this series is related to the patch that converts the
>driver to phylink interface in net-next "net: macb: convert to phylink".
>Next patch is for adding support for C45 interface and the final patch
>adds 10G MAC support.
>
>The patch sequences are detailed as below
>
>1. 0001-net-macb-fix-for-fixed-link-mode
>This patch fix the issue with fixed-link mode in macb phylink interface.
>In fixed-link we don't need to parse phandle because it's better handled
>by phylink_of_phy_connect()
>
>2. 0002-net-macb-add-support-for-C45-MDIO-read-write
>This patch is to support C45 interface to PHY. This upgrade is downward
>compatible.
>All versions of the MAC (old and new) using the GPL driver support both Clause 22
>and
>Clause 45 operation. Whether the access is in Clause 22 or Clause 45 format
>depends
>on the data pattern written to the PHY management register.
>
>3. 0003-net-macb-add-support-for-high-speed-interface
>This patch add support for 10G fixed mode.
>
>Changes since v1:
>1. phy_node reference count handling in patch 0001-net-macb-fix-for-fixed-link-
>mode
>2. Using fixed value for HS_MAC_SPEED_x
>
>Thanks,
>Milind Parab
>
>
>Milind Parab (3):
>  net: macb: fix for fixed-link mode
>  net: macb: add support for C45 MDIO read/write
>  net: macb: add support for high speed interface
>
> drivers/net/ethernet/cadence/macb.h      |  65 ++++++-
> drivers/net/ethernet/cadence/macb_main.c | 224 +++++++++++++++++++----
> 2 files changed, 247 insertions(+), 42 deletions(-)
>
>--
>2.17.1