[PATCH 11/16] rtc: rv3029: correctly handle PON and VLOW2

From: Alexandre Belloni
Date: Sat Dec 14 2019 - 17:10:48 EST


In case the data is invalid (PON or VLOW2 are set in STATUS, explicitly
tell userspace that the time is invalid. Only remove VLOW2 when setting a
new valid time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
drivers/rtc/rtc-rv3029c2.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index 6ae96baa111a..433aad16897e 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -159,20 +159,21 @@ static int rv3029_eeprom_enter(struct rv3029_data *rv3029)
ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
if (ret < 0)
return ret;
- if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
+ if (sr & RV3029_STATUS_VLOW2)
+ return -ENODEV;
+ if (sr & RV3029_STATUS_VLOW1) {
/* We clear the bits and retry once just in case
* we had a brown out in early startup.
*/
ret = regmap_update_bits(rv3029->regmap, RV3029_STATUS,
- RV3029_STATUS_VLOW1 |
- RV3029_STATUS_VLOW2, 0);
+ RV3029_STATUS_VLOW1, 0);
if (ret < 0)
return ret;
usleep_range(1000, 10000);
ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
if (ret < 0)
return ret;
- if (sr & (RV3029_STATUS_VLOW1 | RV3029_STATUS_VLOW2)) {
+ if (sr & RV3029_STATUS_VLOW1) {
dev_err(rv3029->dev,
"Supply voltage is too low to safely access the EEPROM.\n");
return -ENODEV;
@@ -306,9 +307,17 @@ static irqreturn_t rv3029_handle_irq(int irq, void *dev_id)
static int rv3029_read_time(struct device *dev, struct rtc_time *tm)
{
struct rv3029_data *rv3029 = dev_get_drvdata(dev);
+ unsigned int sr;
int ret;
u8 regs[RV3029_WATCH_SECTION_LEN] = { 0, };

+ ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
+ if (ret < 0)
+ return ret;
+
+ if (sr & (RV3029_STATUS_VLOW2 | RV3029_STATUS_PON))
+ return -EINVAL;
+
ret = regmap_bulk_read(rv3029->regmap, RV3029_W_SEC, regs,
RV3029_WATCH_SECTION_LEN);
if (ret < 0) {
@@ -454,9 +463,9 @@ static int rv3029_set_time(struct device *dev, struct rtc_time *tm)
if (ret < 0)
return ret;

- /* clear PON bit */
+ /* clear PON and VLOW2 bits */
return regmap_update_bits(rv3029->regmap, RV3029_STATUS,
- RV3029_STATUS_PON, 0);
+ RV3029_STATUS_PON | RV3029_STATUS_VLOW2, 0);
}

static int rv3029_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
--
2.23.0