Re: [PATCH v7 5/6] MIPS: X1000: Add missing X1000 nodes.

From: Paul Cercueil
Date: Mon Dec 09 2019 - 10:15:33 EST


Hi Zhou,


Le lun., dÃc. 9, 2019 at 21:00, åçæ (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx> a Ãcrit :
Add the appropriate DT node to probe pdma/msc/rtc/watchdog/ethernet
driver using the devicetree.

Signed-off-by: åçæ (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---

Notes:
v7:
New patch, merge[05/12],[07/12],[09/12],[11/12] in v6.

arch/mips/boot/dts/ingenic/x1000.dtsi | 96 +++++++++++++++++++++++++++++++++++
1 file changed, 96 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 13a6c9ff..398a756 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/dma/x1000-dma.h>

/ {
#address-cells = <1>;
@@ -68,6 +69,25 @@
interrupts = <27 26 25>;
};

+ wdt: watchdog@10002000 {
+ compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
+ reg = <0x10002000 0x10>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>;
+ clock-names = "rtc";
+ };

The watchdog node should be a children of the TCU node, see
Documentation/devicetree/bindings/timer/ingenic,tcu.txt


+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
pinctrl: pin-controller@10010000 {
compatible = "ingenic,x1000-pinctrl";
reg = <0x10010000 0x800>;
@@ -173,4 +193,80 @@

status = "disabled";
};
+
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1000-dma";
+ reg = <0x13420000 0x400
+ 0x13421000 0x40>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu X1000_CLK_PDMA>;
+ };
+
+ mac: mac@134b0000 {

Please name the nodes according to the devicetree specification; this should be 'ethernet@134b0000'.


+ compatible = "ingenic,x1000-mac", "snps,dwmac";
+ reg = <0x134b0000 0x2000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <55>;
+ interrupt-names = "macirq";
+
+ clocks = <&cgu X1000_CLK_MAC>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ msc0: msc@13450000 {

This should be 'mmc@13450000'


+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu X1000_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ msc1: msc@13460000 {

This should be 'mmc@13460000'.

Cheers,
-Paul

+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu X1000_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
};
--
2.7.4