Re: [v6] i2c: imx: support slave mode for imx I2C driver
From: Oleksij Rempel
Date:  Thu Dec 05 2019 - 06:43:55 EST
Hi,
On 04.12.19 11:00, Sascha Hauer wrote:
Hi,
The patch looks ok to me now, but I still do not like the #ifdeffery
around CONFIG_I2C_SLAVE. With the patch I just sent (You are on Cc:)
we could apply the following on your patch which makes it more readable
and increases compile coverage.
Wolfram, Biwen, what do you think?
RCAR depends on slave:
config I2C_RCAR 
        tristate "Renesas R-Car I2C Controller" 
        depends on ARCH_RENESAS || COMPILE_TEST 
        select I2C_SLAVE
see:
drivers/i2c/busses/i2c-rcar.c
So, I would suggest to do the same in imx.
So far, I tested this patch on iMX6S. It works in one board (i2c-gpio + i2c-imx) and
two board (i2c-imx + i2c-imx) configuration.
Tested-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Sascha
---------------------------8<------------------------------
 From 52f7c2bf59db61d4b27b59ca6404136e3ed77310 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Date: Wed, 4 Dec 2019 10:56:34 +0100
Subject: [PATCH] fixup! i2c: imx: support slave mode for imx I2C driver
---
  drivers/i2c/busses/i2c-imx.c | 21 ++++++++++-----------
  1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 40ccfca600bf..c5d9ae8226cd 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -203,9 +203,7 @@ struct imx_i2c_struct {
  	struct pinctrl_state *pinctrl_pins_gpio;
  
  	struct imx_i2c_dma	*dma;
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
  	struct i2c_client	*slave;
-#endif
  };
  
  static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
@@ -913,12 +911,10 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
  
  	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
  
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
  	if (i2c_imx->slave) {
  		dev_err(&i2c_imx->adapter.dev, "Please not do operations of master mode in slave mode");
  		return -EBUSY;
  	}
-#endif
  
  	result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
  	if (result < 0)
@@ -1068,7 +1064,6 @@ static u32 i2c_imx_func(struct i2c_adapter *adapter)
  		| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
  }
  
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
  static int i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx)
  {
  	int temp;
@@ -1159,6 +1154,10 @@ static int i2c_imx_reg_slave(struct i2c_client *client)
  {
  	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
  	int ret;
+
+	if (!IS_ENABLED(CONFIG_I2C_SLAVE))
+		return -EINVAL;
+
  	if (i2c_imx->slave)
  		return -EBUSY;
  
@@ -1173,6 +1172,9 @@ static int i2c_imx_unreg_slave(struct i2c_client *client)
  {
  	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
  
+	if (!IS_ENABLED(CONFIG_I2C_SLAVE))
+		return -EINVAL;
+
  	if (!i2c_imx->slave)
  		return -EINVAL;
  
@@ -1188,15 +1190,12 @@ static int i2c_imx_unreg_slave(struct i2c_client *client)
  
  	return 0;
  }
-#endif
  
  static const struct i2c_algorithm i2c_imx_algo = {
  	.master_xfer	= i2c_imx_xfer,
  	.functionality	= i2c_imx_func,
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
  	.reg_slave	= i2c_imx_reg_slave,
  	.unreg_slave	= i2c_imx_unreg_slave,
-#endif
  };
  
  static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
@@ -1208,10 +1207,10 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
  
  	if (status & I2SR_IIF) {
  		i2c_imx_clr_if_bit(status, i2c_imx);
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
-		if (i2c_imx->slave)
+
+		if (IS_ENABLED(CONFIG_I2C_SLAVE) && i2c_imx->slave)
  			return i2c_imx_slave_isr(i2c_imx);
-#endif
+
  		i2c_imx->i2csr = status;
  		return i2c_imx_master_isr(i2c_imx);
  	}
Kind regards,
Oleksij Rempel
--
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |