Re: [PATCH 1/2] dmaengine: ti: edma: add missed pm_runtime_disable

From: Peter Ujfalusi
Date: Fri Nov 22 2019 - 02:58:34 EST


Hi,

On 18/11/2019 9.37, Chuhong Yuan wrote:
> The driver forgets to call pm_runtime_disable in probe failure and
> remove.
> Add the calls and modify probe failure handling to fix it.
>
> Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
> Signed-off-by: Chuhong Yuan <hslester96@xxxxxxxxx>
> ---
> drivers/dma/ti/edma.c | 43 ++++++++++++++++++++++++++++---------------
> 1 file changed, 28 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
> index ba7c4f07fcd6..8be32fd9f762 100644
> --- a/drivers/dma/ti/edma.c
> +++ b/drivers/dma/ti/edma.c
> @@ -2282,16 +2282,18 @@ static int edma_probe(struct platform_device *pdev)

Please move the pm_runtime_enable/get section just before
edma_setup_from_hw()

> ret = pm_runtime_get_sync(dev);
> if (ret < 0) {
> dev_err(dev, "pm_runtime_get_sync() failed\n");
> - return ret;
> + goto err_disable_pm;

Here you need:
pm_runtime_disable(dev);
return ret;

> }
>
> ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> if (ret)
> - return ret;
> + goto err_disable_pm;
>
> ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
> - if (!ecc)
> - return -ENOMEM;
> + if (!ecc) {
> + ret = -ENOMEM;
> + goto err_disable_pm;
> + }
>
> ecc->dev = dev;
> ecc->id = pdev->id;
> @@ -2306,30 +2308,37 @@ static int edma_probe(struct platform_device *pdev)
> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!mem) {
> dev_err(dev, "no mem resource?\n");
> - return -ENODEV;
> + ret = -ENODEV;
> + goto err_disable_pm;
> }
> }
> ecc->base = devm_ioremap_resource(dev, mem);
> - if (IS_ERR(ecc->base))
> - return PTR_ERR(ecc->base);
> + if (IS_ERR(ecc->base)) {
> + ret = PTR_ERR(ecc->base);
> + goto err_disable_pm;
> + }

None of the above changes needed since the pm_runtime initialization is
moved

> platform_set_drvdata(pdev, ecc);

here.

> /* Get eDMA3 configuration from IP */
> ret = edma_setup_from_hw(dev, info, ecc);
> if (ret)
> - return ret;
> + goto err_disable_pm;
>
> /* Allocate memory based on the information we got from the IP */
> ecc->slave_chans = devm_kcalloc(dev, ecc->num_channels,
> sizeof(*ecc->slave_chans), GFP_KERNEL);
> - if (!ecc->slave_chans)
> - return -ENOMEM;
> + if (!ecc->slave_chans) {
> + ret = -ENOMEM;
> + goto err_disable_pm;
> + }
>
> ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
> sizeof(unsigned long), GFP_KERNEL);
> - if (!ecc->slot_inuse)
> - return -ENOMEM;
> + if (!ecc->slot_inuse) {
> + ret = -ENOMEM;
> + goto err_disable_pm;
> + }

and this does not apply since we have the
ecc->channels_mask = devm_kcalloc()
in here.

If you rebase, then I would suggest to combine the memory allocation
checks into one:
if (!ecc->slave_chans || !ecc->slot_inuse | !ecc->channels_mask) {
ret = -ENOMEM;
goto err_disable_pm;
}

>
> ecc->default_queue = info->default_queue;
>
> @@ -2368,7 +2377,7 @@ static int edma_probe(struct platform_device *pdev)
> ecc);
> if (ret) {
> dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
> - return ret;
> + goto err_disable_pm;
> }
> ecc->ccint = irq;
> }
> @@ -2384,7 +2393,7 @@ static int edma_probe(struct platform_device *pdev)
> ecc);
> if (ret) {
> dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
> - return ret;
> + goto err_disable_pm;
> }
> ecc->ccerrint = irq;
> }
> @@ -2392,7 +2401,8 @@ static int edma_probe(struct platform_device *pdev)
> ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
> if (ecc->dummy_slot < 0) {
> dev_err(dev, "Can't allocate PaRAM dummy slot\n");
> - return ecc->dummy_slot;
> + ret = ecc->dummy_slot;
> + goto err_disable_pm;
> }
>
> queue_priority_mapping = info->queue_priority_mapping;
> @@ -2473,6 +2483,8 @@ static int edma_probe(struct platform_device *pdev)
>
> err_reg1:
> edma_free_slot(ecc, ecc->dummy_slot);
> +err_disable_pm:

Please add:
pm_runtime_put_sync(dev);

> + pm_runtime_disable(dev);
> return ret;
> }
>
> @@ -2503,6 +2515,7 @@ static int edma_remove(struct platform_device *pdev)
> if (ecc->dma_memcpy)
> dma_async_device_unregister(ecc->dma_memcpy);
> edma_free_slot(ecc, ecc->dummy_slot);

Here also:
pm_runtime_put_sync(dev);


> + pm_runtime_disable(dev);
>
> return 0;
> }
>

- PÃter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki