[PATCH v7 5/7] arm64: dts: bitmain: Source common clock for UART controllers

From: Manivannan Sadhasivam
Date: Fri Nov 15 2019 - 11:29:53 EST


Remove fixed clock and source common clock for UART controllers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts | 9 ---------
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 12 ++++++++++++
2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
index 3e8c70778e24..7a2c7f9c2660 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -49,12 +49,6 @@
reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
};

- uart_clk: uart-clk {
- compatible = "fixed-clock";
- clock-frequency = <500000000>;
- #clock-cells = <0>;
- };
-
soc {
gpio0: gpio@50027000 {
porta: gpio-controller@0 {
@@ -173,21 +167,18 @@

&uart0 {
status = "okay";
- clocks = <&uart_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0_default>;
};

&uart1 {
status = "okay";
- clocks = <&uart_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
};

&uart2 {
status = "okay";
- clocks = <&uart_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_default>;
};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 8471662413da..fa6e6905f588 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -174,6 +174,9 @@
uart0: serial@58018000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x58018000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -184,6 +187,9 @@
uart1: serial@5801A000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801a000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -194,6 +200,9 @@
uart2: serial@5801C000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801c000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -204,6 +213,9 @@
uart3: serial@5801E000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801e000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
--
2.17.1