[PATCH v2 0/2] ARM: dts: ls1021a: define and use external interrupt lines

[Rasmus Villemoes]

A device tree binding documentation as well as a driver implementing
support for the external interrupt lines on the ls1021a has been
merged into irqchip-next, so will very likely appear in v5.5. See

87cd38dfd9e6 dt/bindings: Add bindings for Layerscape external irqs
0dcd9f872769 irqchip: Add support for Layerscape external interrupt lines

present in next-20191114.

These patches simply add the extirq node to the ls1021a.dtsi and make
use of it on the LS1021A-TSN board. I hope these can be picked up so
they also land in v5.5, so we don't have to wait a full extra release
cycle.

v2: fix interrupt type in 2/2 (s/IRQ_TYPE_EDGE_FALLING/IRQ_TYPE_LEVEL_LOW/).

Rasmus Villemoes (1):
  ARM: dts: ls1021a: add node describing external interrupt lines

Vladimir Oltean (1):
  ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs

 arch/arm/boot/dts/ls1021a-tsn.dts |  4 ++++
 arch/arm/boot/dts/ls1021a.dtsi    | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+)

-- 
2.23.0