[Patch v4 2/3] ARM: dts: dra7: add vpe clkctrl node

From: Benoit Parrot
Date: Tue Nov 12 2019 - 09:24:16 EST


Add clkctrl nodes for VPE module.

Note that because of the current dts node name dependency for mapping to
clock domain, we must still use "vpe-clkctrl@" naming instead of generic
"clock@" naming for the node. And because of this, it's probably best to
apply the dts node addition together along with the other clock changes.

Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
---
arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 93e1eb83bed9..d1c2406ec71c 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1591,10 +1591,10 @@

rtc_cm: rtc-cm@700 {
compatible = "ti,omap4-cm";
- reg = <0x700 0x100>;
+ reg = <0x700 0x60>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x700 0x100>;
+ ranges = <0 0x700 0x60>;

rtc_clkctrl: rtc-clkctrl@20 {
compatible = "ti,clkctrl";
@@ -1603,6 +1603,20 @@
};
};

+ vpe_cm: vpe-cm@760 {
+ compatible = "ti,omap4-cm";
+ reg = <0x760 0xc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x760 0xc>;
+
+ vpe_clkctrl: vpe-clkctrl@0 {
+ compatible = "ti,clkctrl";
+ reg = <0x0 0xc>;
+ #clock-cells = <2>;
+ };
+ };
+
};

&cm_core {
--
2.17.1