[PATCH v5 01/15] bindings: soc: ti: add documentation for k3 ringacc

From: Peter Ujfalusi
Date: Mon Nov 11 2019 - 08:52:41 EST


From: Grygorii Strashko <grygorii.strashko@xxxxxx>

The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
enable straightforward passing of work between a producer and a consumer.
There is one RINGACC module per NAVSS on TI AM65x and j721e.

This patch introduces RINGACC device tree bindings.

Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt

diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
new file mode 100644
index 000000000000..59758ccce809
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
@@ -0,0 +1,59 @@
+* Texas Instruments K3 NavigatorSS Ring Accelerator
+
+The Ring Accelerator (RA) is a machine which converts read/write accesses
+from/to a constant address into corresponding read/write accesses from/to a
+circular data structure in memory. The RA eliminates the need for each DMA
+controller which needs to access ring elements from having to know the current
+state of the ring (base address, current offset). The DMA controller
+performs a read or write access to a specific address range (which maps to the
+source interface on the RA) and the RA replaces the address for the transaction
+with a new address which corresponds to the head or tail element of the ring
+(head for reads, tail for writes).
+
+The Ring Accelerator is a hardware module that is responsible for accelerating
+management of the packet queues. The K3 SoCs can have more than one RA instances
+
+Required properties:
+- compatible : Must be "ti,am654-navss-ringacc";
+- reg : Should contain register location and length of the following
+ named register regions.
+- reg-names : should be
+ "rt" - The RA Ring Real-time Control/Status Registers
+ "fifos" - The RA Queues Registers
+ "proxy_gcfg" - The RA Proxy Global Config Registers
+ "proxy_target" - The RA Proxy Datapath Registers
+- ti,num-rings : Number of rings supported by RA
+- ti,sci-rm-range-gp-rings : TI-SCI RM subtype for GP ring range
+- ti,sci : phandle on TI-SCI compatible System controller node
+- ti,sci-dev-id : TI-SCI device id of the ring accelerator
+- msi-parent : phandle for "ti,sci-inta" interrupt controller
+
+Optional properties:
+ -- ti,dma-ring-reset-quirk : enable ringacc / udma ring state interoperability
+ issue software w/a
+
+Example:
+
+ringacc: ringacc@3c000000 {
+ compatible = "ti,am654-navss-ringacc";
+ reg = <0x0 0x3c000000 0x0 0x400000>,
+ <0x0 0x38000000 0x0 0x400000>,
+ <0x0 0x31120000 0x0 0x100>,
+ <0x0 0x33000000 0x0 0x40000>;
+ reg-names = "rt", "fifos",
+ "proxy_gcfg", "proxy_target";
+ ti,num-rings = <818>;
+ ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+ ti,dma-ring-reset-quirk;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <187>;
+ msi-parent = <&inta_main_udmass>;
+};
+
+client:
+
+dma_ipx: dma_ipx@<addr> {
+ ...
+ ti,ringacc = <&ringacc>;
+ ...
+}
--
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki