[PATCH v2 3/5] drm/rockchip: add ability to handle external dphys in mipi-dsi

From: Heiko Stuebner
Date: Thu Nov 07 2019 - 19:03:25 EST


While the common case is that the dsi controller uses an internal dphy,
accessed through the phy registers inside the dsi controller, there is
also the possibility to use a separate dphy from a different vendor.

One such case is the Rockchip px30 that uses a Innosilicon Mipi dphy,
so add the support for handling such a constellation, including the pll
also getting generated inside that external phy.

Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
---
.../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 68 +++++++++++++++++--
1 file changed, 64 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index bc073ec5c183..1e6578f911a0 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -12,6 +12,7 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>

@@ -223,6 +224,10 @@ struct dw_mipi_dsi_rockchip {
bool is_slave;
struct dw_mipi_dsi_rockchip *slave;

+ /* optional external dphy */
+ struct phy *phy;
+ union phy_configure_opts phy_opts;
+
unsigned int lane_mbps; /* per lane */
u16 input_div;
u16 feedback_div;
@@ -359,6 +364,9 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
struct dw_mipi_dsi_rockchip *dsi = priv_data;
int ret, i, vco;

+ if (dsi->phy)
+ return 0;
+
/*
* Get vco from frequency(lane_mbps)
* vco frequency table
@@ -467,6 +475,28 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
return ret;
}

+static void dw_mipi_dsi_phy_power_on(void *priv_data)
+{
+ struct dw_mipi_dsi_rockchip *dsi = priv_data;
+ int ret;
+
+ ret = phy_set_mode(dsi->phy, PHY_MODE_MIPI_DPHY);
+ if (ret) {
+ DRM_DEV_ERROR(dsi->dev, "failed to set phy mode: %d\n", ret);
+ return;
+ }
+
+ phy_configure(dsi->phy, &dsi->phy_opts);
+ phy_power_on(dsi->phy);
+}
+
+static void dw_mipi_dsi_phy_power_off(void *priv_data)
+{
+ struct dw_mipi_dsi_rockchip *dsi = priv_data;
+
+ phy_power_off(dsi->phy);
+}
+
static int
dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
unsigned long mode_flags, u32 lanes, u32 format,
@@ -504,6 +534,17 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
"DPHY clock frequency is out of range\n");
}

+ /* for external phy only a the mipi_dphy_config is necessary */
+ if (dsi->phy) {
+ phy_mipi_dphy_get_default_config(mode->clock * 1000 * 10 / 8,
+ bpp, lanes,
+ &dsi->phy_opts.mipi_dphy);
+ dsi->lane_mbps = target_mbps;
+ *lane_mbps = dsi->lane_mbps;
+
+ return 0;
+ }
+
fin = clk_get_rate(dsi->pllref_clk);
fout = target_mbps * USEC_PER_SEC;

@@ -561,6 +602,8 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,

static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_rockchip_phy_ops = {
.init = dw_mipi_dsi_phy_init,
+ .power_on = dw_mipi_dsi_phy_power_on,
+ .power_off = dw_mipi_dsi_phy_power_off,
.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
};

@@ -920,12 +963,29 @@ static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
return -EINVAL;
}

+ /* try to get a possible external dphy */
+ dsi->phy = devm_phy_optional_get(dev, "dphy");
+ if (IS_ERR(dsi->phy)) {
+ ret = PTR_ERR(dsi->phy);
+ DRM_DEV_ERROR(dev, "failed to get mipi dphy: %d\n", ret);
+ return ret;
+ }
+
dsi->pllref_clk = devm_clk_get(dev, "ref");
if (IS_ERR(dsi->pllref_clk)) {
- ret = PTR_ERR(dsi->pllref_clk);
- DRM_DEV_ERROR(dev,
- "Unable to get pll reference clock: %d\n", ret);
- return ret;
+ if (dsi->phy) {
+ /*
+ * if external phy is present, pll will be
+ * generated there.
+ */
+ dsi->pllref_clk = NULL;
+ } else {
+ ret = PTR_ERR(dsi->pllref_clk);
+ DRM_DEV_ERROR(dev,
+ "Unable to get pll reference clock: %d\n",
+ ret);
+ return ret;
+ }
}

if (dsi->cdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) {
--
2.23.0