[PATCH 3/3] arm64: dts: xilinx: Add the power nodes for zynqmp
From: Rajan Vaja
Date: Thu Nov 07 2019 - 04:45:18 EST
Add power domain nodes for zynqmp.
Signed-off-by: Rajan Vaja <rajan.vaja@xxxxxxxxxx>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 48 ++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 59a547b..f915bc0 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -12,6 +12,8 @@
* the License, or (at your option) any later version.
*/
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
+
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
@@ -127,7 +129,14 @@
firmware {
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
+ #power-domain-cells = <0x1>;
method = "smc";
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupt-parent = <&gic>;
+ interrupts = <0 35 4>;
+ };
+
zynqmp_clk: clock-controller {
u-boot,dm-pre-reloc;
#clock-cells = <1>;
@@ -180,6 +189,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&zynqmp_firmware PD_CAN_0>;
};
can1: can@ff070000 {
@@ -191,6 +201,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&zynqmp_firmware PD_CAN_1>;
};
cci: cci@fd6e0000 {
@@ -221,6 +232,7 @@
interrupts = <0 124 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan2: dma@fd510000 {
@@ -231,6 +243,7 @@
interrupts = <0 125 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan3: dma@fd520000 {
@@ -241,6 +254,7 @@
interrupts = <0 126 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan4: dma@fd530000 {
@@ -251,6 +265,7 @@
interrupts = <0 127 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan5: dma@fd540000 {
@@ -261,6 +276,7 @@
interrupts = <0 128 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan6: dma@fd550000 {
@@ -271,6 +287,7 @@
interrupts = <0 129 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan7: dma@fd560000 {
@@ -281,6 +298,7 @@
interrupts = <0 130 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan8: dma@fd570000 {
@@ -291,6 +309,7 @@
interrupts = <0 131 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <128>;
+ power-domains = <&zynqmp_firmware PD_GDMA>;
};
/* LPDDMA default allows only secured access. inorder to enable
@@ -305,6 +324,7 @@
interrupts = <0 77 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan2: dma@ffa90000 {
@@ -315,6 +335,7 @@
interrupts = <0 78 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan3: dma@ffaa0000 {
@@ -325,6 +346,7 @@
interrupts = <0 79 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan4: dma@ffab0000 {
@@ -335,6 +357,7 @@
interrupts = <0 80 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan5: dma@ffac0000 {
@@ -345,6 +368,7 @@
interrupts = <0 81 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan6: dma@ffad0000 {
@@ -355,6 +379,7 @@
interrupts = <0 82 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan7: dma@ffae0000 {
@@ -365,6 +390,7 @@
interrupts = <0 83 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan8: dma@ffaf0000 {
@@ -375,6 +401,7 @@
interrupts = <0 84 4>;
clock-names = "clk_main", "clk_apb";
xlnx,bus-width = <64>;
+ power-domains = <&zynqmp_firmware PD_ADMA>;
};
mc: memory-controller@fd070000 {
@@ -393,6 +420,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_0>;
};
gem1: ethernet@ff0c0000 {
@@ -404,6 +432,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_1>;
};
gem2: ethernet@ff0d0000 {
@@ -415,6 +444,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_2>;
};
gem3: ethernet@ff0e0000 {
@@ -426,6 +456,7 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_ETH_3>;
};
gpio: gpio@ff0a0000 {
@@ -438,6 +469,7 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
+ power-domains = <&zynqmp_firmware PD_GPIO>;
};
i2c0: i2c@ff020000 {
@@ -448,6 +480,7 @@
reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_I2C_0>;
};
i2c1: i2c@ff030000 {
@@ -458,6 +491,7 @@
reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_I2C_1>;
};
pcie: pcie@fd0e0000 {
@@ -489,6 +523,7 @@
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+ power-domains = <&zynqmp_firmware PD_PCIE>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
@@ -512,6 +547,7 @@
reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
+ power-domains = <&zynqmp_firmware PD_SATA>;
};
sdhci0: mmc@ff160000 {
@@ -521,6 +557,7 @@
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ power-domains = <&zynqmp_firmware PD_SD_0>;
};
sdhci1: mmc@ff170000 {
@@ -530,6 +567,7 @@
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ power-domains = <&zynqmp_firmware PD_SD_1>;
};
smmu: smmu@fd800000 {
@@ -554,6 +592,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_SPI_0>;
};
spi1: spi@ff050000 {
@@ -565,6 +604,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&zynqmp_firmware PD_SPI_1>;
};
ttc0: timer@ff110000 {
@@ -574,6 +614,7 @@
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_0>;
};
ttc1: timer@ff120000 {
@@ -583,6 +624,7 @@
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_1>;
};
ttc2: timer@ff130000 {
@@ -592,6 +634,7 @@
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_2>;
};
ttc3: timer@ff140000 {
@@ -601,6 +644,7 @@
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&zynqmp_firmware PD_TTC_3>;
};
uart0: serial@ff000000 {
@@ -610,6 +654,7 @@
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&zynqmp_firmware PD_UART_0>;
};
uart1: serial@ff010000 {
@@ -619,6 +664,7 @@
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&zynqmp_firmware PD_UART_1>;
};
usb0: usb@fe200000 {
@@ -628,6 +674,7 @@
interrupts = <0 65 4>;
reg = <0x0 0xfe200000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
+ power-domains = <&zynqmp_firmware PD_USB_0>;
};
usb1: usb@fe300000 {
@@ -637,6 +684,7 @@
interrupts = <0 70 4>;
reg = <0x0 0xfe300000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
+ power-domains = <&zynqmp_firmware PD_USB_1>;
};
watchdog0: watchdog@fd4d0000 {
--
2.7.4