Re: [PATCH 1/2] hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call

[Guenter Roeck]

On Wed, Nov 06, 2019 at 02:01:05PM -0600, Eddie James wrote:
> Since i2c_smbus functions can sleep, the brightness setting function
> for this driver must be the blocking version to avoid scheduling while
> atomic.
> 
> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>

Applied.

Thanks,
Guenter

> ---
>  drivers/hwmon/pmbus/ibm-cffps.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
> index d61547ed0da0..c6a00e83aac6 100644
> --- a/drivers/hwmon/pmbus/ibm-cffps.c
> +++ b/drivers/hwmon/pmbus/ibm-cffps.c
> @@ -297,8 +297,8 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
>  	return rc;
>  }
>  
> -static void ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
> -					 enum led_brightness brightness)
> +static int ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
> +					enum led_brightness brightness)
>  {
>  	int rc;
>  	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
> @@ -316,9 +316,11 @@ static void ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
>  	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
>  				       psu->led_state);
>  	if (rc < 0)
> -		return;
> +		return rc;
>  
>  	led_cdev->brightness = brightness;
> +
> +	return 0;
>  }
>  
>  static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
> @@ -356,7 +358,7 @@ static void ibm_cffps_create_led_class(struct ibm_cffps *psu)
>  		 client->addr);
>  	psu->led.name = psu->led_name;
>  	psu->led.max_brightness = LED_FULL;
> -	psu->led.brightness_set = ibm_cffps_led_brightness_set;
> +	psu->led.brightness_set_blocking = ibm_cffps_led_brightness_set;
>  	psu->led.blink_set = ibm_cffps_led_blink_set;
>  
>  	rc = devm_led_classdev_register(dev, &psu->led);