[PATCH 5/5] PCI: Allow building PCIe things without PCIEPORTBUS

[Bjorn Helgaas]

From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

Some things in drivers/pci/pcie (aspm.c and ptm.c) do not depend on the
PCIe portdrv, so we should be able to build them even if PCIEPORTBUS is not
selected.  Remove the PCIEPORTBUS guard from building pcie/.

Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
 drivers/pci/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 28cdd8c0213a..522d2b974e91 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -7,6 +7,8 @@ obj-$(CONFIG_PCI)		+= access.o bus.o probe.o host-bridge.o \
 				   pci-sysfs.o rom.o setup-res.o irq.o vpd.o \
 				   setup-bus.o vc.o mmap.o setup-irq.o
 
+obj-$(CONFIG_PCI)		+= pcie/
+
 ifdef CONFIG_PCI
 obj-$(CONFIG_PROC_FS)		+= proc.o
 obj-$(CONFIG_SYSFS)		+= slot.o
@@ -15,7 +17,6 @@ endif
 
 obj-$(CONFIG_OF)		+= of.o
 obj-$(CONFIG_PCI_QUIRKS)	+= quirks.o
-obj-$(CONFIG_PCIEPORTBUS)	+= pcie/
 obj-$(CONFIG_HOTPLUG_PCI)	+= hotplug/
 obj-$(CONFIG_PCI_MSI)		+= msi.o
 obj-$(CONFIG_PCI_ATS)		+= ats.o
-- 
2.24.0.rc1.363.gb1bccd3e3d-goog