Re: [PATCH v2 1/7] dt-bindings: pwm: allwinner: Add H6 PWM description

[ClÃment PÃron]

On Mon, 4 Nov 2019 at 09:04, Uwe Kleine-KÃnig
<u.kleine-koenig@xxxxxxxxxxxxxx> wrote:
>
> On Sun, Nov 03, 2019 at 09:33:28PM +0100, ClÃment PÃron wrote:
> > From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> >
> > H6 PWM block is basically the same as A20 PWM, except that it also has
> > bus clock and reset line which needs to be handled accordingly.
> >
> > Expand Allwinner PWM binding with H6 PWM specifics.
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > Signed-off-by: ClÃment PÃron <peron.clem@xxxxxxxxx>
> > ---
> >  .../bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 45 ++++++++++++++++++-
> >  1 file changed, 44 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
> > index 0ac52f83a58c..bf36ea509f31 100644
> > --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
> > +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
> > @@ -30,13 +30,46 @@ properties:
> >        - items:
> >            - const: allwinner,sun50i-h5-pwm
> >            - const: allwinner,sun5i-a13-pwm
> > +      - const: allwinner,sun50i-h6-pwm
> >
> >    reg:
> >      maxItems: 1
> >
> > -  clocks:
> > +  # Even though it only applies to subschemas under the conditionals,
> > +  # not listing them here will trigger a warning because of the
> > +  # additionalsProperties set to false.
> > +  clocks: true
> > +  clock-names: true
> > +  resets:
> >      maxItems: 1
> >
> > +  if:
> > +    properties:
> > +      compatible:
> > +        contains:
> > +          const: allwinner,sun50i-h6-pwm
> > +
> > +  then:
> > +    properties:
> > +      clocks:
> > +        items:
> > +          - description: Module Clock
> > +          - description: Bus Clock
> > +
> > +      clock-names:
> > +        items:
> > +          - const: mod
> > +          - const: bus
> > +
> > +    required:
> > +      - clock-names
> > +      - resets
> > +
> > +  else:
> > +    properties:
> > +      clocks:
> > +        maxItems: 1
> > +
>
> I guess this hunk says "If this is a allwinner,sun50i-h6-pwm, a mod and
> bus clock is required.", right?

Correct.
>
>
> I wonder if it is sensible to require a clock-names property in the else
> branch, too. This would make it obvious if the clock there corresponds
> to the "mod" or the "bus" clock on H6. (I guess it's "mod".)

This will also require to change example and all the current allwinner
device-tree that have a PWM declared.

Regards,
ClÃment

>
> Best regards
> Uwe
>
> --
> Pengutronix e.K.                           | Uwe Kleine-KÃnig            |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |