[PATCH v2 1/2] dt-bindings: arm: atmel: add bindings for PIT64B

[Claudiu Beznea]

Add device tree bindings for PIT64B timer.

Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---

Hi Rob, Nicolas,

You Reviewed-by/Acked-by v1 [1] of this patch but I didn't collect it in this
version since I removed the clock-frequency binding in this version. 

Thank you!

Change in v2:
- removed clock-frequency binding

[1] https://lore.kernel.org/lkml/1552580772-8499-1-git-send-email-claudiu.beznea@xxxxxxxxxxxxx/

 Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 9fbde401a090..e003a553b986 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -10,6 +10,12 @@ PIT Timer required properties:
 - interrupts: Should contain interrupt for the PIT which is the IRQ line
   shared across all System Controller members.
 
+PIT64B Timer required properties:
+- compatible: Should be "microchip,sam9x60-pit64b"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for PIT64B timer
+- clocks: Should contain the available clock sources for PIT64B timer.
+
 System Timer (ST) required properties:
 - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
 - reg: Should contain registers location and length
-- 
2.7.4