[PATCH 0/3] Add support for Thor96 board
From: Manivannan Sadhasivam
Date: Thu Oct 24 2019 - 10:42:59 EST
Hello,
This patchset adds support for Thor96 board from Einfochips. This board is
one of the 96Boards Consumer Edition platform powered by the NXP i.MX8MQ
SoC.
Following are the features supported currently:
1. uSD
2. WiFi/BT
3. Ethernet
4. EEPROM (M24256)
5. NOR Flash (W25Q256JW)
6. 2xUSB3.0 ports and 1xUSB2.0 port at HS expansion
More information about this board can be found in Arrow website:
https://www.arrow.com/en/products/i.imx8-thor96/arrow-development-tools
Link to 96Boards CE Specification: https://linaro.co/ce-specification
Expecting patch 3 to go through MTD tree and 1,2 to go through freescale
tree.
Thanks,
Mani
Manivannan Sadhasivam (3):
dt-bindings: arm: Add devicetree binding for Thor96 Board
arm64: dts: freescale: Add devicetree support for Thor96 board
mtd: spi-nor: Add support for w25q256jw
.../devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx8mq-thor96.dts | 581 ++++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 2 +
4 files changed, 585 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
--
2.17.1