Re: [PATCH v5 3/5] locking/qspinlock: Introduce CNA into the slow path of qspinlock

From: Alex Kogan
Date: Fri Oct 18 2019 - 15:50:14 EST



> On Oct 16, 2019, at 4:57 PM, Waiman Long <longman@xxxxxxxxxx> wrote:
>
> On 10/16/19 12:29 AM, Alex Kogan wrote:
>> In CNA, spinning threads are organized in two queues, a main queue for
>> threads running on the same node as the current lock holder, and a
>> secondary queue for threads running on other nodes. After acquiring the
>> MCS lock and before acquiring the spinlock, the lock holder scans the
>> main queue looking for a thread running on the same node (pre-scan). If
>> found (call it thread T), all threads in the main queue between the
>> current lock holder and T are moved to the end of the secondary queue.
>> If such T is not found, we make another scan of the main queue when
>> unlocking the MCS lock (post-scan), starting at the position where
>> pre-scan stopped. If both scans fail to find such T, the MCS lock is
>> passed to the first thread in the secondary queue. If the secondary queue
>> is empty, the lock is passed to the next thread in the main queue.
>> For more details, see https://urldefense.proofpoint.com/v2/url?u=https-3A__arxiv.org_abs_1810.05600&d=DwICaQ&c=RoP1YumCXCgaWHvlZYR8PZh8Bv7qIrMUB65eapI_JnE&r=Hvhk3F4omdCk-GE1PTOm3Kn0A7ApWOZ2aZLTuVxFK4k&m=YE_EINNtJ6kvX7-r1fCoSPo_hPkyTTkYRKJ2WSQgURA&s=Hxk5PX1WhsVBJMb5LB-bw_EBT3ZXMbr0G40LbDQWtqg&e= .
>>
>> Note that this variant of CNA may introduce starvation by continuously
>> passing the lock to threads running on the same node. This issue
>> will be addressed later in the series.
>>
>> Enabling CNA is controlled via a new configuration option
>> (NUMA_AWARE_SPINLOCKS). By default, the CNA variant is patched in at the
>> boot time only if we run on a multi-node machine in native environment and
>> the new config is enabled. (For the time being, the patching requires
>> CONFIG_PARAVIRT_SPINLOCKS to be enabled as well. However, this should be
>> resolved once static_call() is available.) This default behavior can be
>> overridden with the new kernel boot command-line option
>> "numa_spinlock=on/off" (default is "auto").
>>
>> Signed-off-by: Alex Kogan <alex.kogan@xxxxxxxxxx>
>> Reviewed-by: Steve Sistare <steven.sistare@xxxxxxxxxx>
>> ---
>> arch/x86/Kconfig | 19 +++
>> arch/x86/include/asm/qspinlock.h | 4 +
>> arch/x86/kernel/alternative.c | 41 +++++++
>> kernel/locking/mcs_spinlock.h | 2 +-
>> kernel/locking/qspinlock.c | 34 +++++-
>> kernel/locking/qspinlock_cna.h | 258 +++++++++++++++++++++++++++++++++++++++
>> 6 files changed, 353 insertions(+), 5 deletions(-)
>> create mode 100644 kernel/locking/qspinlock_cna.h
>>
>> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
>> index d6e1faa28c58..1d480f190def 100644
>> --- a/arch/x86/Kconfig
>> +++ b/arch/x86/Kconfig
>> @@ -1573,6 +1573,25 @@ config NUMA
>>
>> Otherwise, you should say N.
>>
>> +config NUMA_AWARE_SPINLOCKS
>> + bool "Numa-aware spinlocks"
>> + depends on NUMA
>> + depends on QUEUED_SPINLOCKS
>> + # For now, we depend on PARAVIRT_SPINLOCKS to make the patching work.
>> + # This is awkward, but hopefully would be resolved once static_call()
>> + # is available.
>> + depends on PARAVIRT_SPINLOCKS
>> + default y
>> + help
>> + Introduce NUMA (Non Uniform Memory Access) awareness into
>> + the slow path of spinlocks.
>> +
>> + In this variant of qspinlock, the kernel will try to keep the lock
>> + on the same node, thus reducing the number of remote cache misses,
>> + while trading some of the short term fairness for better performance.
>> +
>> + Say N if you want absolute first come first serve fairness.
>> +
>> config AMD_NUMA
>> def_bool y
>> prompt "Old style AMD Opteron NUMA detection"
>
> I forgot to mention that you should also document the new boot command
> line option at Documentation/admin-guide/kernel-parameters.txt.
Will do.

>
>
>> diff --git a/arch/x86/include/asm/qspinlock.h b/arch/x86/include/asm/qspinlock.h
>> index 444d6fd9a6d8..6fa8fcc5c7af 100644
>> --- a/arch/x86/include/asm/qspinlock.h
>> +++ b/arch/x86/include/asm/qspinlock.h
>> @@ -27,6 +27,10 @@ static __always_inline u32 queued_fetch_set_pending_acquire(struct qspinlock *lo
>> return val;
>> }
>>
>> +#ifdef CONFIG_NUMA_AWARE_SPINLOCKS
>> +extern void __cna_queued_spin_lock_slowpath(struct qspinlock *lock, u32 val);
>> +#endif
>> +
>> #ifdef CONFIG_PARAVIRT_SPINLOCKS
>> extern void native_queued_spin_lock_slowpath(struct qspinlock *lock, u32 val);
>> extern void __pv_init_lock_hash(void);
>> diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
>> index 9d3a971ea364..e0e66bd8b251 100644
>> --- a/arch/x86/kernel/alternative.c
>> +++ b/arch/x86/kernel/alternative.c
>> @@ -698,6 +698,33 @@ static void __init int3_selftest(void)
>> unregister_die_notifier(&int3_exception_nb);
>> }
>>
>> +#if defined(CONFIG_NUMA_AWARE_SPINLOCKS)
>> +/*
>> + * Constant (boot-param configurable) flag selecting the NUMA-aware variant
>> + * of spinlock. Possible values: -1 (off) / 0 (auto, default) / 1 (on).
>> + */
>> +static int numa_spinlock_flag;
>> +
>> +static int __init numa_spinlock_setup(char *str)
>> +{
>> + if (!strcmp(str, "auto")) {
>> + numa_spinlock_flag = 0;
>> + return 1;
>> + } else if (!strcmp(str, "on")) {
>> + numa_spinlock_flag = 1;
>> + return 1;
>> + } else if (!strcmp(str, "off")) {
>> + numa_spinlock_flag = -1;
>> + return 1;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +__setup("numa_spinlock=", numa_spinlock_setup);
>> +
>> +#endif
>> +
>> void __init alternative_instructions(void)
>> {
>> int3_selftest();
>> @@ -738,6 +765,20 @@ void __init alternative_instructions(void)
>> }
>> #endif
>>
>> +#if defined(CONFIG_NUMA_AWARE_SPINLOCKS)
>> + /*
>> + * By default, switch to the NUMA-friendly slow path for
>> + * spinlocks when we have multiple NUMA nodes in native environment.
>> + */
>> + if ((numa_spinlock_flag == 1) ||
>> + (numa_spinlock_flag == 0 && nr_node_ids > 1 &&
>> + pv_ops.lock.queued_spin_lock_slowpath ==
>> + native_queued_spin_lock_slowpath)) {
>> + pv_ops.lock.queued_spin_lock_slowpath =
>> + __cna_queued_spin_lock_slowpath;
>> + }
>> +#endif
>> +
>> apply_paravirt(__parainstructions, __parainstructions_end);
>>
>> restart_nmi();
>> diff --git a/kernel/locking/mcs_spinlock.h b/kernel/locking/mcs_spinlock.h
>> index 52d06ec6f525..e40b9538b79f 100644
>> --- a/kernel/locking/mcs_spinlock.h
>> +++ b/kernel/locking/mcs_spinlock.h
>> @@ -17,7 +17,7 @@
>>
>> struct mcs_spinlock {
>> struct mcs_spinlock *next;
>> - int locked; /* 1 if lock acquired */
>> + unsigned int locked; /* 1 if lock acquired */
>> int count; /* nesting count, see qspinlock.c */
>> };
>>
>> diff --git a/kernel/locking/qspinlock.c b/kernel/locking/qspinlock.c
>> index c06d1e8075d9..6d8c4a52e44e 100644
>> --- a/kernel/locking/qspinlock.c
>> +++ b/kernel/locking/qspinlock.c
>> @@ -11,7 +11,7 @@
>> * Peter Zijlstra <peterz@xxxxxxxxxxxxx>
>> */
>>
>> -#ifndef _GEN_PV_LOCK_SLOWPATH
>> +#if !defined(_GEN_PV_LOCK_SLOWPATH) && !defined(_GEN_CNA_LOCK_SLOWPATH)
>>
>> #include <linux/smp.h>
>> #include <linux/bug.h>
>> @@ -70,7 +70,8 @@
>> /*
>> * On 64-bit architectures, the mcs_spinlock structure will be 16 bytes in
>> * size and four of them will fit nicely in one 64-byte cacheline. For
>> - * pvqspinlock, however, we need more space for extra data. To accommodate
>> + * pvqspinlock, however, we need more space for extra data. The same also
>> + * applies for the NUMA-aware variant of spinlocks (CNA). To accommodate
>> * that, we insert two more long words to pad it up to 32 bytes. IOW, only
>> * two of them can fit in a cacheline in this case. That is OK as it is rare
>> * to have more than 2 levels of slowpath nesting in actual use. We don't
>> @@ -79,7 +80,7 @@
>> */
>> struct qnode {
>> struct mcs_spinlock mcs;
>> -#ifdef CONFIG_PARAVIRT_SPINLOCKS
>> +#if defined(CONFIG_PARAVIRT_SPINLOCKS) || defined(CONFIG_NUMA_AWARE_SPINLOCKS)
>> long reserved[2];
>> #endif
>> };
>> @@ -103,6 +104,8 @@ struct qnode {
>> * Exactly fits one 64-byte cacheline on a 64-bit architecture.
>> *
>> * PV doubles the storage and uses the second cacheline for PV state.
>> + * CNA also doubles the storage and uses the second cacheline for
>> + * CNA-specific state.
>> */
>> static DEFINE_PER_CPU_ALIGNED(struct qnode, qnodes[MAX_NODES]);
>>
>> @@ -316,7 +319,7 @@ static __always_inline void __mcs_pass_lock(struct mcs_spinlock *node,
>> #define try_clear_tail __try_clear_tail
>> #define mcs_pass_lock __mcs_pass_lock
>>
>> -#endif /* _GEN_PV_LOCK_SLOWPATH */
>> +#endif /* _GEN_PV_LOCK_SLOWPATH && _GEN_CNA_LOCK_SLOWPATH */
>>
>> /**
>> * queued_spin_lock_slowpath - acquire the queued spinlock
>> @@ -589,6 +592,29 @@ void queued_spin_lock_slowpath(struct qspinlock *lock, u32 val)
>> EXPORT_SYMBOL(queued_spin_lock_slowpath);
>>
>> /*
>> + * Generate the code for NUMA-aware spinlocks
>> + */
>> +#if !defined(_GEN_CNA_LOCK_SLOWPATH) && defined(CONFIG_NUMA_AWARE_SPINLOCKS)
>> +#define _GEN_CNA_LOCK_SLOWPATH
>> +
>> +#undef pv_wait_head_or_lock
>> +#define pv_wait_head_or_lock cna_pre_scan
>> +
>> +#undef try_clear_tail
>> +#define try_clear_tail cna_try_change_tail
>> +
>> +#undef mcs_pass_lock
>> +#define mcs_pass_lock cna_pass_lock
>> +
>> +#undef queued_spin_lock_slowpath
>> +#define queued_spin_lock_slowpath __cna_queued_spin_lock_slowpath
>> +
>> +#include "qspinlock_cna.h"
>> +#include "qspinlock.c"
>> +
>> +#endif
>> +
>> +/*
>> * Generate the paravirt code for queued_spin_unlock_slowpath().
>> */
>> #if !defined(_GEN_PV_LOCK_SLOWPATH) && defined(CONFIG_PARAVIRT_SPINLOCKS)
>> diff --git a/kernel/locking/qspinlock_cna.h b/kernel/locking/qspinlock_cna.h
>> new file mode 100644
>> index 000000000000..4d095f742d31
>> --- /dev/null
>> +++ b/kernel/locking/qspinlock_cna.h
>> @@ -0,0 +1,258 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef _GEN_CNA_LOCK_SLOWPATH
>> +#error "do not include this file"
>> +#endif
>> +
>> +#include <linux/topology.h>
>> +
>> +/*
>> + * Implement a NUMA-aware version of MCS (aka CNA, or compact NUMA-aware lock).
>> + *
>> + * In CNA, spinning threads are organized in two queues, a main queue for
>> + * threads running on the same NUMA node as the current lock holder, and a
>> + * secondary queue for threads running on other nodes. Schematically, it
>> + * looks like this:
>> + *
>> + * cna_node
>> + * +----------+ +--------+ +--------+
>> + * |mcs:next | -> |mcs:next| -> ... |mcs:next| -> NULL [Main queue]
>> + * |mcs:locked| -+ +--------+ +--------+
>> + * +----------+ |
>> + * +----------------------+
>> + * \/
>> + * +--------+ +--------+
>> + * |mcs:next| -> ... |mcs:next| [Secondary queue]
>> + * +--------+ +--------+
>> + * ^ |
>> + * +--------------------+
>> + *
>> + * N.B. locked = 1 if secondary queue is absent. Othewrise, it contains the
>> + * encoded pointer to the tail of the secondary queue, which is organized as a
>> + * circular list.
>> + *
>> + * After acquiring the MCS lock and before acquiring the spinlock, the lock
>> + * holder scans the main queue looking for a thread running on the same node
>> + * (pre-scan). If found (call it thread T), all threads in the main queue
>> + * between the current lock holder and T are moved to the end of the secondary
>> + * queue. If such T is not found, we make another scan of the main queue when
>> + * unlocking the MCS lock (post-scan), starting at the node where pre-scan
>> + * stopped. If both scans fail to find such T, the MCS lock is passed to the
>> + * first thread in the secondary queue. If the secondary queue is empty, the
>> + * lock is passed to the next thread in the main queue.
>> + *
>> + * For more details, see https://urldefense.proofpoint.com/v2/url?u=https-3A__arxiv.org_abs_1810.05600&d=DwICaQ&c=RoP1YumCXCgaWHvlZYR8PZh8Bv7qIrMUB65eapI_JnE&r=Hvhk3F4omdCk-GE1PTOm3Kn0A7ApWOZ2aZLTuVxFK4k&m=YE_EINNtJ6kvX7-r1fCoSPo_hPkyTTkYRKJ2WSQgURA&s=Hxk5PX1WhsVBJMb5LB-bw_EBT3ZXMbr0G40LbDQWtqg&e= .
>> + *
>> + * Authors: Alex Kogan <alex.kogan@xxxxxxxxxx>
>> + * Dave Dice <dave.dice@xxxxxxxxxx>
>> + */
>> +
>> +struct cna_node {
>> + struct mcs_spinlock mcs;
>> + int numa_node;
>> + u32 encoded_tail;
>> + u32 pre_scan_result; /* 0 or an encoded tail */
>> +};
>> +
>> +static void __init cna_init_nodes_per_cpu(unsigned int cpu)
>> +{
>> + struct mcs_spinlock *base = per_cpu_ptr(&qnodes[0].mcs, cpu);
>> + int numa_node = cpu_to_node(cpu);
>> + int i;
>> +
>> + for (i = 0; i < MAX_NODES; i++) {
>> + struct cna_node *cn = (struct cna_node *)grab_mcs_node(base, i);
>> +
>> + cn->numa_node = numa_node;
>> + cn->encoded_tail = encode_tail(cpu, i);
>> + /*
>> + * @encoded_tail has to be larger than 1, so we do not confuse
>> + * it with other valid values for @locked or @pre_scan_result
>> + * (0 or 1)
>> + */
>> + WARN_ON(cn->encoded_tail <= 1);
>> + }
>> +}
>> +
>> +static void __init cna_init_nodes(void)
>> +{
>> + unsigned int cpu;
>> +
>> + BUILD_BUG_ON(sizeof(struct cna_node) > sizeof(struct qnode));
>> + /* we store an ecoded tail word in the node's @locked field */
>> + BUILD_BUG_ON(sizeof(u32) > sizeof(unsigned int));
>> +
>> + for_each_possible_cpu(cpu)
>> + cna_init_nodes_per_cpu(cpu);
>> +}
>> +early_initcall(cna_init_nodes);
> typedef int (*initcall_t)(void);
>
> So cna_init_nodes() should return an integer value. You can just return
> 0 in this case.
I'll fix that, thanks.

>
>> +
>> +static inline bool cna_try_change_tail(struct qspinlock *lock, u32 val,
>> + struct mcs_spinlock *node)
>> +{
>> + struct mcs_spinlock *head_2nd, *tail_2nd;
>> + u32 new;
>> +
>> + /* If the secondary queue is empty, do what MCS does. */
>> + if (node->locked <= 1)
>> + return __try_clear_tail(lock, val, node);
>> +
>> + /*
>> + * Try to update the tail value to the last node in the secondary queue.
>> + * If successful, pass the lock to the first thread in the secondary
>> + * queue. Doing those two actions effectively moves all nodes from the
>> + * secondary queue into the main one.
>> + */
>> + tail_2nd = decode_tail(node->locked);
>> + head_2nd = tail_2nd->next;
>> + new = ((struct cna_node *)tail_2nd)->encoded_tail + _Q_LOCKED_VAL;
>> +
>> + if (atomic_try_cmpxchg_relaxed(&lock->val, &val, new)) {
>> + /*
>> + * Try to reset @next in tail_2nd to NULL, but no need to check
>> + * the result - if failed, a new successor has updated it.
>> + */
>> + cmpxchg64_relaxed(&tail_2nd->next, head_2nd, NULL);
>
> Why do you use cmpxchg64*()? That can be problematic when compiling on
> 32-bit architecture. I think you should just use cmpxhg_relaxed() for
> automatic sizing.
Thatâs right. I will change this.

Thanks,
â Alex