[PATCH v2] dt-bindings: iommu: Convert Arm SMMUv3 to DT schema

From: Rob Herring
Date: Mon Oct 14 2019 - 15:13:02 EST


Convert the Arm SMMv3 binding to the DT schema format.

Cc: Joerg Roedel <joro@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Will Deacon <will@xxxxxxxxxx>
Cc: Robin Murphy <Robin.Murphy@xxxxxxx>
Cc: iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
v2:
- Refine interrupt definition based on Robin's comments

.../devicetree/bindings/iommu/arm,smmu-v3.txt | 77 --------------
.../bindings/iommu/arm,smmu-v3.yaml | 100 ++++++++++++++++++
2 files changed, 100 insertions(+), 77 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
create mode 100644 Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml

diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
deleted file mode 100644
index c9abbf3e4f68..000000000000
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* ARM SMMUv3 Architecture Implementation
-
-The SMMUv3 architecture is a significant departure from previous
-revisions, replacing the MMIO register interface with in-memory command
-and event queues and adding support for the ATS and PRI components of
-the PCIe specification.
-
-** SMMUv3 required properties:
-
-- compatible : Should include:
-
- * "arm,smmu-v3" for any SMMUv3 compliant
- implementation. This entry should be last in the
- compatible list.
-
-- reg : Base address and size of the SMMU.
-
-- interrupts : Non-secure interrupt list describing the wired
- interrupt sources corresponding to entries in
- interrupt-names. If no wired interrupts are
- present then this property may be omitted.
-
-- interrupt-names : When the interrupts property is present, should
- include the following:
- * "eventq" - Event Queue not empty
- * "priq" - PRI Queue not empty
- * "cmdq-sync" - CMD_SYNC complete
- * "gerror" - Global Error activated
- * "combined" - The combined interrupt is optional,
- and should only be provided if the
- hardware supports just a single,
- combined interrupt line.
- If provided, then the combined interrupt
- will be used in preference to any others.
-
-- #iommu-cells : See the generic IOMMU binding described in
- devicetree/bindings/pci/pci-iommu.txt
- for details. For SMMUv3, must be 1, with each cell
- describing a single stream ID. All possible stream
- IDs which a device may emit must be described.
-
-** SMMUv3 optional properties:
-
-- dma-coherent : Present if DMA operations made by the SMMU (page
- table walks, stream table accesses etc) are cache
- coherent with the CPU.
-
- NOTE: this only applies to the SMMU itself, not
- masters connected upstream of the SMMU.
-
-- msi-parent : See the generic MSI binding described in
- devicetree/bindings/interrupt-controller/msi.txt
- for a description of the msi-parent property.
-
-- hisilicon,broken-prefetch-cmd
- : Avoid sending CMD_PREFETCH_* commands to the SMMU.
-
-- cavium,cn9900-broken-page1-regspace
- : Replaces all page 1 offsets used for EVTQ_PROD/CONS,
- PRIQ_PROD/CONS register access with page 0 offsets.
- Set for Cavium ThunderX2 silicon that doesn't support
- SMMU page1 register space.
-
-** Example
-
- smmu@2b400000 {
- compatible = "arm,smmu-v3";
- reg = <0x0 0x2b400000 0x0 0x20000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "eventq", "priq", "cmdq-sync", "gerror";
- dma-coherent;
- #iommu-cells = <1>;
- msi-parent = <&its 0xff0000>;
- };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
new file mode 100644
index 000000000000..662cbc4592c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/arm,smmu-v3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM SMMUv3 Architecture Implementation
+
+maintainers:
+ - Will Deacon <will@xxxxxxxxxx>
+ - Robin Murphy <Robin.Murphy@xxxxxxx>
+
+description: |+
+ The SMMUv3 architecture is a significant departure from previous
+ revisions, replacing the MMIO register interface with in-memory command
+ and event queues and adding support for the ATS and PRI components of
+ the PCIe specification.
+
+properties:
+ $nodename:
+ pattern: "^iommu@[0-9a-f]*"
+ compatible:
+ const: arm,smmu-v3
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+
+ interrupt-names:
+ oneOf:
+ - const: combined
+ description:
+ The combined interrupt is optional, and should only be provided if the
+ hardware supports just a single, combined interrupt line.
+ If provided, then the combined interrupt will be used in preference to
+ any others.
+ - items:
+ - const: eventq # Event Queue not empt
+ - const: priq # PRI Queue not empty
+ - const: cmdq-sync # CMD_SYNC complete
+ - const: gerror # Global Error activated
+ - minItems: 2
+ maxItems: 4
+ items:
+ - const: eventq
+ - const: gerror
+ - const: priq
+ - const: cmdq-sync
+
+ '#iommu-cells':
+ const: 1
+
+ dma-coherent:
+ description: |
+ Present if page table walks made by the SMMU are cache coherent with the
+ CPU.
+
+ NOTE: this only applies to the SMMU itself, not masters connected
+ upstream of the SMMU.
+
+ msi-parent: true
+
+ hisilicon,broken-prefetch-cmd:
+ type: boolean
+ description: Avoid sending CMD_PREFETCH_* commands to the SMMU.
+
+ cavium,cn9900-broken-page1-regspace:
+ type: boolean
+ description:
+ Replaces all page 1 offsets used for EVTQ_PROD/CONS, PRIQ_PROD/CONS
+ register access with page 0 offsets. Set for Cavium ThunderX2 silicon that
+ doesn't support SMMU page1 register space.
+
+required:
+ - compatible
+ - reg
+ - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+ - |+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ iommu@2b400000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x2b400000 0x20000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "priq", "cmdq-sync", "gerror";
+ dma-coherent;
+ #iommu-cells = <1>;
+ msi-parent = <&its 0xff0000>;
+ };
--
2.20.1