[Patch 3/3] ARM: dts: dra7: Add ti-sysc node for VPE

From: Benoit Parrot
Date: Wed Oct 09 2019 - 13:54:12 EST


Add VPE node as a child of l4 interconnect in order for it to probe
using ti-sysc.

Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
---
arch/arm/boot/dts/dra7-l4.dtsi | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index ea0e7c19eb4e..d876c1754f33 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4158,12 +4158,36 @@
ranges = <0x0 0x1b0000 0x10000>;
};

- target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1d0010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1d0000 0x10000>;
+
+ vpe: vpe@0 {
+ compatible = "ti,vpe";
+ reg = <0x0000 0x120>,
+ <0x0700 0x80>,
+ <0x5700 0x18>,
+ <0xd000 0x400>;
+ reg-names = "vpe_top",
+ "sc",
+ "csc",
+ "vpdma";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
};
--
2.17.1