Re: e1000e regression - 5.4rc1

From: Tobias Klausmann
Date: Tue Oct 08 2019 - 14:28:10 EST


Hi,

On 08.10.19 09:46, Kai-Heng Feng wrote:
Hi Tobias,

On Oct 5, 2019, at 03:52, Tobias Klausmann <tobias.johannes.klausmann@xxxxxxxxxx> wrote:

Hello,

On 04.10.19 19:36, Kai-Heng Feng wrote:
Hi Tobias

On Oct 4, 2019, at 18:34, Tobias Klausmann <tobias.johannes.klausmann@xxxxxxxxxx> wrote:

Hello all,

While testing the 5.4rc1 release, i noticed my Ethernet never coming fully up, seemingly having a timeout problem. While bisecting this i landed at the commit dee23594d587386e9fda76732aa5f5a487709510 ("e1000e: Make speed detection on hotplugging cable more reliable") as the first bad commit. And indeed just reverting the commit on top of 5.4rc1 resolves the problem. Let me know if you have further questions, or patches to test!
Is runtime PM enabled (i.e. "power/control" = auto)?

Yes it is set to auto.
Is something like TLP or `powertop --auto-tune` is in use?

Do you still see the issue when "power/control" keeps at "on"?


With "power/control" set to "on" it does still cycle between up and down. But yes i have upower and powerdevil running. After killing them the connection comes up with "power/control" set to "on", yet not with "auto".


Greetings,

Tobias



Kai-Heng


Also please attach full dmesg, thanks!
Attached,

Tobias

Kai-Heng

Greetings,

Tobias


lspci:

00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 06)
DeviceName: Onboard LAN
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 56
Region 0: Memory at fbf00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbf28000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f040 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00698 Data: 0000
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e

<dmesg.txt>