[PATCH v6 0/4] Use MFD framework for SGI IOC3 drivers

From: Thomas Bogendoerfer
Date: Mon Sep 23 2019 - 07:46:54 EST


SGI IOC3 ASIC includes support for ethernet, PS2 keyboard/mouse,
NIC (number in a can), GPIO and a byte bus. By attaching a
SuperIO chip to it, it also supports serial lines and a parallel
port. The chip is used on a variety of SGI systems with different
configurations. This patchset moves code out of the network driver,
which doesn't belong there, into its new place a MFD driver and
specific platform drivers for the different subfunctions.

Changes in v6:
- dropped patches accepted for v5.4-rc1
- moved serio patch to ip30 patch series
- adapted nvmem patch

Changes in v5:
- requested by Jakub I've splited ioc3 ethernet driver changes into
more steps to make the transition more visible; on the way there
I've "checkpatched" the driver and reduced code reorderings
- dropped all uint16_t and uint32_t
- added nvmem API extension to the documenation file
- changed to use request_irq/free_irq in serio driver
- removed wrong kfree() in serio error path

Changes in v4:
- added w1 drivers to the series after merge in 5.3 failed because
of no response from maintainer and other parts of this series
won't work without that drivers
- moved ip30 systemboard support to the ip30 series, which will
deal with rtc oddity Lee found
- converted to use devm_platform_ioremap_resource
- use PLATFORM_DEVID_AUTO for serial, ethernet and serio in mfd driver
- fixed reverse christmas order in ioc3-eth.c
- formating issue found by Lee
- re-worked irq request/free in serio driver to avoid crashes during
probe/remove

Changes in v3:
- use 1-wire subsystem for handling proms
- pci-xtalk driver uses prom information to create PCI subsystem
ids for use in MFD driver
- changed MFD driver to only use static declared mfd_cells
- added IP30 system board setup to MFD driver
- mac address is now read from ioc3-eth driver with nvmem framework

Changes in v2:
- fixed issue in ioc3kbd.c reported by Dmitry Torokhov
- merged IP27 RTC removal and 8250 serial driver addition into
main MFD patch to keep patches bisectable

Thomas Bogendoerfer (4):
nvmem: core: add nvmem_device_find
MIPS: PCI: use information from 1-wire PROM for IOC3 detection
mfd: ioc3: Add driver for SGI IOC3 chip
MIPS: SGI-IP27: fix readb/writeb addressing

Documentation/driver-api/nvmem.rst | 2 +
arch/mips/include/asm/mach-ip27/mangle-port.h | 4 +-
arch/mips/include/asm/pci/bridge.h | 1 +
arch/mips/include/asm/sn/ioc3.h | 47 ++-
arch/mips/pci/pci-xtalk-bridge.c | 135 +++++-
arch/mips/sgi-ip27/ip27-timer.c | 20 -
arch/mips/sgi-ip27/ip27-xtalk.c | 38 +-
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ioc3.c | 585 ++++++++++++++++++++++++++
drivers/net/ethernet/sgi/Kconfig | 4 +-
drivers/net/ethernet/sgi/ioc3-eth.c | 561 +++++-------------------
drivers/nvmem/core.c | 61 ++-
drivers/rtc/rtc-m48t35.c | 11 +
drivers/tty/serial/8250/8250_ioc3.c | 98 +++++
drivers/tty/serial/8250/Kconfig | 11 +
drivers/tty/serial/8250/Makefile | 1 +
include/linux/nvmem-consumer.h | 9 +
18 files changed, 1054 insertions(+), 548 deletions(-)
create mode 100644 drivers/mfd/ioc3.c
create mode 100644 drivers/tty/serial/8250/8250_ioc3.c

--
2.13.7