[PATCH] drm/sun4i: Use vi plane as primary

[roman . stratiienko]

From: Roman Stratiienko <roman.stratiienko@xxxxxxxxxxxxxxx>

DE2.0 blender does not take into the account alpha channel of vi layer.
Thus makes overlaying of this layer totally opaque.
Using vi layer as bottom solves this issue.

Tested on Android.

Signed-off-by: Roman Stratiienko <roman.stratiienko@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 33 -----------------------
 drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 36 +++++++++++++++++++++++++-
 2 files changed, 35 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
index dd2a1c851939..25183badc85f 100644
--- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
@@ -99,36 +99,6 @@ static int sun8i_ui_layer_update_coord(struct sun8i_mixer *mixer, int channel,
 	insize = SUN8I_MIXER_SIZE(src_w, src_h);
 	outsize = SUN8I_MIXER_SIZE(dst_w, dst_h);
 
-	if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
-		bool interlaced = false;
-		u32 val;
-
-		DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n",
-				 dst_w, dst_h);
-		regmap_write(mixer->engine.regs,
-			     SUN8I_MIXER_GLOBAL_SIZE,
-			     outsize);
-		regmap_write(mixer->engine.regs,
-			     SUN8I_MIXER_BLEND_OUTSIZE(bld_base), outsize);
-
-		if (state->crtc)
-			interlaced = state->crtc->state->adjusted_mode.flags
-				& DRM_MODE_FLAG_INTERLACE;
-
-		if (interlaced)
-			val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED;
-		else
-			val = 0;
-
-		regmap_update_bits(mixer->engine.regs,
-				   SUN8I_MIXER_BLEND_OUTCTL(bld_base),
-				   SUN8I_MIXER_BLEND_OUTCTL_INTERLACED,
-				   val);
-
-		DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n",
-				 interlaced ? "on" : "off");
-	}
-
 	/* Set height and width */
 	DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n",
 			 state->src.x1 >> 16, state->src.y1 >> 16);
@@ -349,9 +319,6 @@ struct sun8i_ui_layer *sun8i_ui_layer_init_one(struct drm_device *drm,
 	if (!layer)
 		return ERR_PTR(-ENOMEM);
 
-	if (index == 0)
-		type = DRM_PLANE_TYPE_PRIMARY;
-
 	/* possible crtcs are set later */
 	ret = drm_universal_plane_init(drm, &layer->plane, 0,
 				       &sun8i_ui_layer_funcs,
diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
index 07c27e6a4b77..49c4074e164f 100644
--- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
@@ -116,6 +116,36 @@ static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel,
 	insize = SUN8I_MIXER_SIZE(src_w, src_h);
 	outsize = SUN8I_MIXER_SIZE(dst_w, dst_h);
 
+	if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
+		bool interlaced = false;
+		u32 val;
+
+		DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n",
+				 dst_w, dst_h);
+		regmap_write(mixer->engine.regs,
+			     SUN8I_MIXER_GLOBAL_SIZE,
+			     outsize);
+		regmap_write(mixer->engine.regs,
+			     SUN8I_MIXER_BLEND_OUTSIZE(bld_base), outsize);
+
+		if (state->crtc)
+			interlaced = state->crtc->state->adjusted_mode.flags
+				& DRM_MODE_FLAG_INTERLACE;
+
+		if (interlaced)
+			val = SUN8I_MIXER_BLEND_OUTCTL_INTERLACED;
+		else
+			val = 0;
+
+		regmap_update_bits(mixer->engine.regs,
+				   SUN8I_MIXER_BLEND_OUTCTL(bld_base),
+				   SUN8I_MIXER_BLEND_OUTCTL_INTERLACED,
+				   val);
+
+		DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n",
+				 interlaced ? "on" : "off");
+	}
+
 	/* Set height and width */
 	DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n",
 			 (state->src.x1 >> 16) & ~(format->hsub - 1),
@@ -445,6 +475,7 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm,
 					       struct sun8i_mixer *mixer,
 					       int index)
 {
+	enum drm_plane_type type = DRM_PLANE_TYPE_OVERLAY;
 	struct sun8i_vi_layer *layer;
 	unsigned int plane_cnt;
 	int ret;
@@ -453,12 +484,15 @@ struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm,
 	if (!layer)
 		return ERR_PTR(-ENOMEM);
 
+	if (index == 0)
+		type = DRM_PLANE_TYPE_PRIMARY;
+
 	/* possible crtcs are set later */
 	ret = drm_universal_plane_init(drm, &layer->plane, 0,
 				       &sun8i_vi_layer_funcs,
 				       sun8i_vi_layer_formats,
 				       ARRAY_SIZE(sun8i_vi_layer_formats),
-				       NULL, DRM_PLANE_TYPE_OVERLAY, NULL);
+				       NULL, type, NULL);
 	if (ret) {
 		dev_err(drm->dev, "Couldn't initialize layer\n");
 		return ERR_PTR(ret);
-- 
2.17.1