Re: [PATCH v2] arm: dts: imx6qdl: add gpio expander pca9535

From: Gilles Doffe
Date: Fri Sep 13 2019 - 04:38:43 EST


Hi Marco,

Ack for all, v3 incoming.

Thank you,
Gilles

----- Le 12 Sep 19, Ã 12:12, Marco Felsch m.felsch@xxxxxxxxxxxxxx a Ãcrit :

> Hi Gilles,
>
> On 19-09-12 06:01, Gilles Doffe wrote:
>> Hi Marco,
>>
>> Thanks for your reply and sorry about the delay.
>
> No worries ;)
>
>> ----- Le 22 Juil 19, Ã 9:53, Marco Felsch m.felsch@xxxxxxxxxxxxxx a Ãcrit :
>>
>> > Hi Gilles,
>> >
>> > can you adapt the patch title, I assumed that the base dtsi is adding a
>> > gpio-expander which makes no sense.
>>
>> My first intent was to add the gpio-expander pca9535 into the imx6q-rex-pro.dts
>> and in a future imx6qp-rex-ultra.dts
>> However I noticed that the sgtl5000 was already in the dtsi.
>> It is maybe due to the fact that like the pca9535, the sgtl5000 is present on
>> the baseboard not on the SOM.
>> Thus I guess that baseboard stuff common to all rex SOM should be in
>> imx6qdl-rex.dtsi and not in the dts.
>> Does-it seem correct to you ?
>
> Yes this is correct what Shawn and I mean is that you should adapt the
> commit title. Shawn already give you an example.
>
>> >
>> > On 19-07-19 12:46, Gilles DOFFE wrote:
>> >> The pca9535 gpio expander is present on the Rex baseboard, but missing
>> >> from the dtsi.
>> >>
>> >> Add the new gpio controller and the associated interrupt line
>> >> MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.
>> >>
>> >> Signed-off-by: Gilles DOFFE <gilles.doffe@xxxxxxxxxxxxxxxxxxxx>
>> >> ---
>> >
>> > Having a changelog would be nice too.
>> >
>> >> arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
>> >> 1 file changed, 19 insertions(+)
>> >>
>> >> diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi
>> >> b/arch/arm/boot/dts/imx6qdl-rex.dtsi
>> >> index 97f1659144ea..b517efb22fcb 100644
>> >> --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
>> >> +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
>> >> @@ -136,6 +136,19 @@
>> >> compatible = "atmel,24c02";
>> >> reg = <0x57>;
>> >> };
>> >> +
>> >> + pca9535: gpio8@27 {
>> >> + compatible = "nxp,pca9535";
>> >> + reg = <0x27>;
>> >
>> > The i2c devices are orderd by their i2c-addresses starting from the
>> > lowest.
>> >
>>
>> Ack.
>>
>> >> + gpio-controller;
>> >> + #gpio-cells = <2>;
>> >> + pinctrl-names = "default";
>> >> + pinctrl-0 = <&pinctrl_pca9535>;
>> >> + interrupt-parent = <&gpio6>;
>> >> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
>> >> + interrupt-controller;
>> >> + #interrupt-cells = <2>;
>
> As you pointed out above this device isn't available on the
> imx6dl-rex-basic? You should add: 'status = "disabled";' if this is the
> case.
>
> Regards,
> Marco
>
>> >> + };
>> >> };
>> >>
>> >> &i2c3 {
>> >> @@ -237,6 +250,12 @@
>> >> >;
>> >> };
>> >>
>> >> + pinctrl_pca9535: pca9535 {
>> >> + fsl,pins = <
>> >> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x00017059
>> >
>> > The pinmux below don't use the leading zero's if you are the first I
>> > would drop that.
>> >
>> > Regards,
>> > Marco
>> >
>>
>> Ack.
>>
>> Regards,
>> Gilles
>>
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

--
Gilles DOFFE
Senior Product Engineering Consultant | Rennes, Fr
Bureau
[ tel:+33972468980 | (+33) 9Â72Â46Â89Â80 ] p. : 601
Cellulaire
[ tel:+33660025866 | (+33) 6Â60Â02Â58Â66 ]