Re: [PATCH v3 2/2] backlight: lm3630a: add an enable gpio for the HWEN pin

[Daniel Thompson]

On Wed, Sep 11, 2019 at 07:21:06PM +0200, Andreas Kemnade wrote:
> For now just enable it in the probe function to allow i2c
> access. Disabling also means resetting the register values
> to default and according to the datasheet does not give
> power savings.
> 
> Tested on Kobo Clara HD.
> 
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>

Make sure Dan is happy w.r.t. his review comments but if this driver is
unchanged when you spin v4 (for the DT changes) then feel free to add:

Reviewed-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>


Daniel.

> ---
> changes in v2:
> - simplification
> - correct gpio direction initialisation
> 
> changes in v3:
> - removed legacy include
> 
>  drivers/video/backlight/lm3630a_bl.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
> index 8f84f3684f04..d9e67b9b2571 100644
> --- a/drivers/video/backlight/lm3630a_bl.c
> +++ b/drivers/video/backlight/lm3630a_bl.c
> @@ -12,6 +12,7 @@
>  #include <linux/uaccess.h>
>  #include <linux/interrupt.h>
>  #include <linux/regmap.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/pwm.h>
>  #include <linux/platform_data/lm3630a_bl.h>
>  
> @@ -48,6 +49,7 @@ struct lm3630a_chip {
>  	struct lm3630a_platform_data *pdata;
>  	struct backlight_device *bleda;
>  	struct backlight_device *bledb;
> +	struct gpio_desc *enable_gpio;
>  	struct regmap *regmap;
>  	struct pwm_device *pwmd;
>  };
> @@ -535,6 +537,13 @@ static int lm3630a_probe(struct i2c_client *client,
>  	}
>  	pchip->pdata = pdata;
>  
> +	pchip->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable",
> +						GPIOD_OUT_HIGH);
> +	if (IS_ERR(pchip->enable_gpio)) {
> +		rval = PTR_ERR(pchip->enable_gpio);
> +		return rval;
> +	}
> +
>  	/* chip initialize */
>  	rval = lm3630a_chip_init(pchip);
>  	if (rval < 0) {
> -- 
> 2.20.1
>