Re: [PATCH 2/2] PCI: dwc: Add support to disable equalization phase 2 and 3

From: Pankaj Dubey
Date: Tue Sep 10 2019 - 12:21:55 EST


On Tue, 10 Sep 2019 at 19:59, Andrew Murray <andrew.murray@xxxxxxx> wrote:
>
> On Tue, Sep 10, 2019 at 05:55:02PM +0530, Pankaj Dubey wrote:
> > From: Anvesh Salveru <anvesh.s@xxxxxxxxxxx>
> >
> > In some platforms, PCIe PHY may have issues which will prevent linkup
> > to happen in GEN3 or high speed. In case equalization fails, link will
> > fallback to GEN1.
> >
> > Designware controller gives flexibility to disable GEN3 equalization
> > completely or only phase 2 and 3.
>
> Do some platforms have issues conducting phase 2 and 3 when they successfully
> conduct phase 0 and 1?
>

Yes, it is possible.

> >
> > Platform drivers can disable equalization phase 2 and 3, by setting
> > dwc_pci_quirk flag DWC_EQUALIZATION_DISABLE.
> >
> > Signed-off-by: Anvesh Salveru <anvesh.s@xxxxxxxxxxx>
> > Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> > ---
> > drivers/pci/controller/dwc/pcie-designware.c | 3 +++
> > drivers/pci/controller/dwc/pcie-designware.h | 2 ++
> > 2 files changed, 5 insertions(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > index bf82091..97a8268 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -472,5 +472,8 @@ void dw_pcie_setup(struct dw_pcie *pci)
> > if (pci->dwc_pci_quirk & DWC_EQUALIZATION_DISABLE)
> > val |= PORT_LOGIC_GEN3_EQ_DISABLE;
> >
> > + if (pci->dwc_pci_quirk & DWC_EQ_PHASE_2_3_DISABLE)
> > + val |= PORT_LOGIC_GEN3_EQ_PHASE_2_3_DISABLE;
> > +
> > dw_pcie_writel_dbi(pci, PCIE_PORT_GEN3_RELATED, val);
> > }
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > index a1453c5..b541508 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -31,6 +31,7 @@
> >
> > /* Parameters for PCIe Quirks */
> > #define DWC_EQUALIZATION_DISABLE 0x1
> > +#define DWC_EQ_PHASE_2_3_DISABLE 0x2
>
> It only makes sense for either DWC_EQUALIZATION_DISABLE or DWC_EQ_PHASE_2_3_DISABLE
> to be specified, though if dwc_pci_quirk intends to hold other quirks should these
> be numbers and not bit fields?
>
Yes, you are right in a given platform it will be either
DWC_EQUALIZATION_DISABLE or DWC_EQ_PHASE_2_3_DISABLE.

Intention behind making it bit-field was to add other quirks in future.

> Thanks,
>
> Andrew Murray
>
> >
> > /* Synopsys-specific PCIe configuration registers */
> > #define PCIE_PORT_LINK_CONTROL 0x710
> > @@ -65,6 +66,7 @@
> >
> > #define PCIE_PORT_GEN3_RELATED 0x890
> > #define PORT_LOGIC_GEN3_EQ_DISABLE BIT(16)
> > +#define PORT_LOGIC_GEN3_EQ_PHASE_2_3_DISABLE BIT(9)
> >
> > #define PCIE_ATU_VIEWPORT 0x900
> > #define PCIE_ATU_REGION_INBOUND BIT(31)
> > --
> > 2.7.4
> >