Re: [PATCH v2 1/2] dt-bindings: milbeaut-m10v-hdmac: Add Socionext Milbeaut HDMAC bindings

[Vinod Koul]

On 18-08-19, 00:17, jassisinghbrar@xxxxxxxxx wrote:
> From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
> 
> Document the devicetree bindings for Socionext Milbeaut HDMAC
> controller. Controller has upto 8 floating channels, that need
> a predefined slave-id to work from a set of slaves.
> 
> Signed-off-by: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
> ---
>  .../bindings/dma/milbeaut-m10v-hdmac.txt      | 32 +++++++++++++++++++
>  1 file changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
> new file mode 100644
> index 000000000000..f0960724f1c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
> @@ -0,0 +1,32 @@
> +* Milbeaut AHB DMA Controller
> +
> +Milbeaut AHB DMA controller has transfer capability bellow.

s/bellow/below:

> + - device to memory transfer
> + - memory to device transfer
> +
> +Required property:
> +- compatible:       Should be  "socionext,milbeaut-m10v-hdmac"
> +- reg:              Should contain DMA registers location and length.
> +- interrupts:       Should contain all of the per-channel DMA interrupts.
> +                     Number of channels is configurable - 2, 4 or 8, so
> +                     the number of interrupts specfied should be {2,4,8}.

s/specfied/specified

-- 
~Vinod