Re: [PATCH 04/11] dt-bindings: phy-mtk-tphy: add a new reference clock

[Chunfeng Yun]

On Thu, 2019-08-29 at 15:05 -0500, Rob Herring wrote:
> On Fri, Aug 23, 2019 at 03:00:11PM +0800, Chunfeng Yun wrote:
> > Usually the digital and anolog phys use the same reference clock,
> > but on some platforms, they are separated, so add another optional
> > clock to support it.
> > In order to keep the clock names consistent with PHY IP's, use
> > the da_ref for anolog phy and ref clock for digital phy.
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 7 +++++--
> >  1 file changed, 5 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> > index dbc143ed5999..ed9a2641f204 100644
> > --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> > +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> > @@ -41,9 +41,12 @@ Optional properties (PHY_TYPE_USB2 port (child) node):
> >  - clocks	: a list of phandle + clock-specifier pairs, one for each
> >  		  entry in clock-names
> >  - clock-names	: may contain
> > -		  "ref": 48M reference clock for HighSpeed anolog phy; and 26M
> > -			reference clock for SuperSpeed anolog phy, sometimes is
> > +		  "ref": 48M reference clock for HighSpeed (digital) phy; and 26M
> > +			reference clock for SuperSpeed (digital) phy, sometimes is
> >  			24M, 25M or 27M, depended on platform.
> > +		  "da_ref": the reference clock of anolog phy, used if the clocks
> > +			of anolog and digital phys are separated, otherwise uses
> 
> s/amolog/analog/
will fix it
> 
> > +			"ref" clock only if need.
> 
> needed.
also here

Thanks a lot

> 
> >  
> >  - mediatek,eye-src	: u32, the value of slew rate calibrate
> >  - mediatek,eye-vrt	: u32, the selection of VRT reference voltage
> > -- 
> > 2.23.0
> >