[PATCH v2 2/2] selftests: firmware: Add request_firmware_into_buf tests

[Scott Branden]

Add tests cases for checking request_firmware_into_buf api.
API was introduced into kernel with no testing present previously.

Signed-off-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
Acked-by: Luis Chamberlain <mcgrof@xxxxxxxxxx>
Acked-by: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
---
 .../selftests/firmware/fw_filesystem.sh       | 57 ++++++++++++++++++-
 tools/testing/selftests/firmware/fw_lib.sh    | 11 ++++
 2 files changed, 66 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
index f901076aa2ea..56894477c8bd 100755
--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -116,6 +116,16 @@ config_set_name()
 	echo -n $1 >  $DIR/config_name
 }
 
+config_set_into_buf()
+{
+	echo 1 >  $DIR/config_into_buf
+}
+
+config_unset_into_buf()
+{
+	echo 0 >  $DIR/config_into_buf
+}
+
 config_set_sync_direct()
 {
 	echo 1 >  $DIR/config_sync_direct
@@ -153,11 +163,14 @@ config_set_read_fw_idx()
 
 read_firmwares()
 {
-	if [ "$1" = "xzonly" ]; then
-		fwfile="${FW}-orig"
+	if [ "$(cat $DIR/config_into_buf)" == "1" ]; then
+		fwfile="$FW_INTO_BUF"
 	else
 		fwfile="$FW"
 	fi
+	if [ "$1" = "xzonly" ]; then
+		fwfile="${fwfile}-orig"
+	fi
 	for i in $(seq 0 3); do
 		config_set_read_fw_idx $i
 		# Verify the contents are what we expect.
@@ -194,6 +207,18 @@ test_batched_request_firmware_nofile()
 	echo "OK"
 }
 
+test_batched_request_firmware_into_buf_nofile()
+{
+	echo -n "Batched request_firmware_into_buf() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_set_into_buf
+	config_trigger_sync
+	read_firmwares_expect_nofile
+	release_all_firmware
+	echo "OK"
+}
+
 test_batched_request_firmware_direct_nofile()
 {
 	echo -n "Batched request_firmware_direct() nofile try #$1: "
@@ -259,6 +284,18 @@ test_batched_request_firmware()
 	echo "OK"
 }
 
+test_batched_request_firmware_into_buf()
+{
+	echo -n "Batched request_firmware_into_buf() $2 try #$1: "
+	config_reset
+	config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME
+	config_set_into_buf
+	config_trigger_sync
+	read_firmwares $2
+	release_all_firmware
+	echo "OK"
+}
+
 test_batched_request_firmware_direct()
 {
 	echo -n "Batched request_firmware_direct() $2 try #$1: "
@@ -307,6 +344,10 @@ for i in $(seq 1 5); do
 	test_batched_request_firmware $i normal
 done
 
+for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf $i normal
+done
+
 for i in $(seq 1 5); do
 	test_batched_request_firmware_direct $i normal
 done
@@ -327,6 +368,10 @@ for i in $(seq 1 5); do
 	test_batched_request_firmware_nofile $i
 done
 
+for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf_nofile $i
+done
+
 for i in $(seq 1 5); do
 	test_batched_request_firmware_direct_nofile $i
 done
@@ -350,6 +395,10 @@ for i in $(seq 1 5); do
 	test_batched_request_firmware $i both
 done
 
+for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf $i both
+done
+
 for i in $(seq 1 5); do
 	test_batched_request_firmware_direct $i both
 done
@@ -370,6 +419,10 @@ for i in $(seq 1 5); do
 	test_batched_request_firmware $i xzonly
 done
 
+for i in $(seq 1 5); do
+	test_batched_request_firmware_into_buf $i xzonly
+done
+
 for i in $(seq 1 5); do
 	test_batched_request_firmware_direct $i xzonly
 done
diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
index f236cc295450..b879305a766d 100755
--- a/tools/testing/selftests/firmware/fw_lib.sh
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -9,6 +9,12 @@ DIR=/sys/devices/virtual/misc/test_firmware
 PROC_CONFIG="/proc/config.gz"
 TEST_DIR=$(dirname $0)
 
+# We need to load a different file to test request_firmware_into_buf
+# I believe the issue is firmware loaded cached vs. non-cached
+# with same filename is bungled.
+# To reproduce rename this to test-firmware.bin
+TEST_FIRMWARE_INTO_BUF_FILENAME=test-firmware-into-buf.bin
+
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
 
@@ -108,6 +114,8 @@ setup_tmp_file()
 	FWPATH=$(mktemp -d)
 	FW="$FWPATH/test-firmware.bin"
 	echo "ABCD0123" >"$FW"
+	FW_INTO_BUF="$FWPATH/$TEST_FIRMWARE_INTO_BUF_FILENAME"
+	echo "EFGH4567" >"$FW_INTO_BUF"
 	NAME=$(basename "$FW")
 	if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
 		echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
@@ -175,6 +183,9 @@ test_finish()
 	if [ -f $FW ]; then
 		rm -f "$FW"
 	fi
+	if [ -f $FW_INTO_BUF ]; then
+		rm -f "$FW_INTO_BUF"
+	fi
 	if [ -d $FWPATH ]; then
 		rm -rf "$FWPATH"
 	fi
-- 
2.17.1