Re: [PATCH v2 1/1] arm64: dts: rockchip: Add support for TB-96AI board

From: Elon Zhang
Date: Mon Aug 19 2019 - 22:35:19 EST


Hi Mani,

Thanks for your review. Please see comments inline.

å 8/5/2019 19:28, Manivannan Sadhasivam åé:
Hi Elon,

Thanks for the v2. Still the DT needs to be cleaned up a bit. I have tested this
patch on TB96-AI SOM/Carrier board and found that the USB ports are not working
at all! Do we need to change any switch settings?

Yes. The USB ports can not work. I have already added all USB related setting. I tried

rockchip internel rk3399.dtsi and the USB ports can work, so I think the cause is SoC related

setting difference in mainline kernel.

I can not figure it out for now, should I remove the usb related node in this patch?


Comments are inline.

On Mon, Aug 05, 2019 at 09:57:55AM +0800, Elon Zhang wrote:
Add devicetree support for RK3399Pro TB-96AI board, one of
the 96Boards family.

The TB-96AI board is a 96Boards Compute SOM design, launched
by Linaro, Rockchip and Beiqicloud.

More information can be obtained from the following websites:
1.https://www.96boards.org/product/tb-96ai/
2.http://t.rock-chips.com/
3.http://www.beiqicloud.com/

This patch add basic node for the board and support booting up
to Fedora.

Signed-off-by: Elon Zhang <zhangzj@xxxxxxxxxxxxxx>
---
changes since v1:
- remove needless node
- using a standard LED formats for 96Boards

arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399pro-tb-96ai.dts | 560 ++++++++++++++++++
2 files changed, 561 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 5f2687acbf94..3d6c8d4363b5 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
new file mode 100644
index 000000000000..767b37b854ba
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399pro.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ compatible = "beiqi,rk3399pro-tb-96ai", "rockchip,rk3399pro";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ #clock-cells = <0>;
+ };
+
+ vcc5v0_sys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ leds {
Still the LEDs are not defined as per the format I shared before...

I am not very sure what the format exactly is. Is the LEDs format below right?

Â49ÂÂÂÂÂÂÂÂ leds {
Â50ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ compatible = "gpio-leds";
Â51ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ pinctrl-names = "default";
Â52ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ pinctrl-0 = <&user_led1>,<&user_led2>,<&user_led3>;
Â53
Â54ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ user_led1 {
Â55ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ label = "green:user1";
Â56ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
Â57ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ retain-state-suspended;
Â58ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ };
Â59
Â60ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ user_led2 {
Â61ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ label = "green:user2";
Â62ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
Â63ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ retain-state-suspended;
Â64ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ };
Â65
Â66ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ user_led3 {
Â67ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ label = "green:user3";
Â68ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
Â69ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ retain-state-suspended;
Â70ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ };
Â71ÂÂÂÂÂÂÂÂ };


+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led1>,<&work_led2>,<&work_led3>;
+
+ work_led1 {
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ label = "system_work_led1";
+ retain-state-suspended;
+ };
+
+ work_led2 {
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ label = "system_work_led2";
+ retain-state-suspended;
+ };
+
+ work_led3 {
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ label = "system_work_led3";
+ retain-state-suspended;
+ };
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <180>;
+ i2c-scl-falling-time-ns = <30>;
+ clock-frequency = <400000>;
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default", "pmic-sleep",
+ "pmic-power-off", "pmic-reset";
Does these pinctrl configs useful other than default?

These pinctrl configs are used for sleep/wake. Since mainline MFD and pinctrl driver

has no pinctrl support for RK809, these pinctrl configs will be removed other than default.


+ pinctrl-0 = <&pmic_int_l>;
+ pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
+ pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
+ pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
+ rockchip,system-power-controller;
+ pmic-reset-func = <1>;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ pwrkey {
+ status = "okay";
No compatible needed?
No compatible needed. It is RK809 internel implement.

+ };
+
+ rtc {
+ status = "okay";
No compatible needed?
ditto.

+ };
+
+ pinctrl_rk8xx: pinctrl_rk8xx {
Mainline MFD driver has no pinctrl support for RK809.

Yes. This node will be removed.

Thank,

Elon


+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk809_slppin_null: rk809_slppin_null {
+ pins = "gpio_slp";
+ function = "pin_fun0";
+ };
+
+ rk809_slppin_slp: rk809_slppin_slp {
+ pins = "gpio_slp";
+ function = "pin_fun1";
+ };
+
+ rk809_slppin_pwrdn: rk809_slppin_pwrdn {
+ pins = "gpio_slp";
+ function = "pin_fun2";
+ };
+
+ rk809_slppin_rst: rk809_slppin_rst {
+ pins = "gpio_slp";
+ function = "pin_fun3";
+ };
+ };
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_center";
Please match the regulator names with schematic.

+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_cpu_l";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc3v3_sys";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-name = "vcc_buck5";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2200000>;
+ };
+ };
+
+ vcca_0v9: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vcca_0v9";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-name = "vcc_1v8";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc0v9_soc: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-name = "vcc0v9_soc";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-name = "vcca_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd1v5_dvp: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-name = "vdd1v5_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-name = "vcc_1v5";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-name = "vcc_3v0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc5v0_usb: SWITCH_REG1 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ regulator-name = "vcc5v0_usb";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_3v3: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vccio_3v3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@1c {
+ compatible = "fcs,fan53555";
+ reg = <0x1c>;
+ vin-supply = <&vcc5v0_sys>;
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <2300>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-state = <3>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@10 {
+ compatible = "fcs,fan53555";
+ status = "okay";
+ reg = <0x10>;
+ vin-supply = <&vcc5v0_sys>;
+ pinctrl-0 = <&vsel2_gpio>;
+ vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <735000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <2300>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <345>;
+ i2c-scl-falling-time-ns = <11>;
+ clock-frequency = <100000>;
+};
+
+&io_domains {
+ status = "okay";
+ bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
+ audio-supply = <&vcca_1v8>; /* APIO5_VDD */
+ sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
+ gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&npu_ref_clk>;
+
+ leds {
+ work_led1: work_led1 {
+ rockchip,pins =
+ <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ work_led2: work_led2 {
+ rockchip,pins =
+ <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ work_led3: work_led3 {
+ rockchip,pins =
+ <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ npu_clk {
+ npu_ref_clk: npu-ref-clk {
+ rockchip,pins =
+ <0 RK_PA2 1 &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 RK_PC2 0 &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc-slppin-gpio {
+ rockchip,pins =
+ <1 RK_PA5 0 &pcfg_output_low>;
+ };
+
+ soc_slppin_slp: soc-slppin-slp {
+ rockchip,pins =
+ <1 RK_PA5 1 &pcfg_pull_down>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 RK_PC1 0 &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 RK_PB6 0 &pcfg_pull_down>;
+ };
+ };
+
+ usb3 {
+ usb3_host_en: usb3-host-en {
+ rockchip,pins =
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ non-removable;
+ keep-power-in-suspend;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&tcphy1 {
No tcphy0? I can see this used in schematics.

+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&u2phy1 {
No u2phy0?

+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_host_en>;
+};
+
+&usbdrd_dwc3_0 {
No usbdrd3_0?

Thanks,
Mani

+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ snps,dis-u3-autosuspend-quirk;
+ status = "okay";
+};
+
--
2.17.1