[PATCH v3] gpio: pl061: Fix the issue failed to register the ACPI interrtupion
From: Wei Xu
Date: Mon Aug 19 2019 - 09:29:20 EST
Invoke acpi_gpiochip_request_interrupts after the acpi data has been
attached to the pl061 acpi node to register interruption.
Otherwise it will be failed to register interruption for the ACPI case.
Because in the gpiochip_add_data_with_key, acpi_gpiochip_add is invoked
after gpiochip_add_irqchip but at that time the acpi data has not been
attached yet.
Tested with below steps:
qemu-system-aarch64 \
-machine virt,gic-version=3 -cpu cortex-a57 \
-m 1G,maxmem=4G,slots=4 \
-kernel Image -initrd rootfs.cpio.gz \
-net none -nographic \
-bios QEMU_EFI.fd \
-append "console=ttyAMA0 acpi=force earlycon=pl011,0x9000000"
The pl061 interruption is missed and the following output is not in the
/proc/interrupts on the v5.3-rc4 compared with the v5.2.0-rc7.
43: 0 ARMH0061:00 3 Edge ACPI:Event
Fixes: 04ce935c6b2a ("gpio: pl061: Pass irqchip when adding gpiochip")
Signed-off-by: Wei Xu <xuwei5@xxxxxxxxxxxxx>
---
v2 -> v3:
* addressed the comments of Andy to show only affected output of
/proc/interrupts and drop the whole log of v5.2.0-rc7
v1- > v2:
* rebased on https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git/log/?h=devel
* attached the log based on QEMU v3.0.0 and Linux kernel v5.2.0-rc7
---
drivers/gpio/gpio-pl061.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 722ce5c..e1a434e 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -8,6 +8,7 @@
*
* Data sheet: ARM DDI 0190B, September 2000
*/
+#include <linux/acpi.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/init.h>
@@ -24,6 +25,9 @@
#include <linux/pinctrl/consumer.h>
#include <linux/pm.h>
+#include "gpiolib.h"
+#include "gpiolib-acpi.h"
+
#define GPIODIR 0x400
#define GPIOIS 0x404
#define GPIOIBE 0x408
@@ -345,6 +349,9 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
if (ret)
return ret;
+ if (has_acpi_companion(dev))
+ acpi_gpiochip_request_interrupts(&pl061->gc);
+
amba_set_drvdata(adev, pl061);
dev_info(dev, "PL061 GPIO chip registered\n");
--
2.8.1