[PATCH V2 1/6] arm64: dts: imx8mn-ddr4-evk: Add i2c1 support

From: Anson Huang
Date: Sat Aug 17 2019 - 18:47:04 EST


Enable i2c1 on i.MX8MN DDR4 EVK board.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
No changes.
---
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 9b2c172..5fce5b1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -50,6 +50,13 @@
>;
};

+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
fsl,pins = <
MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
@@ -182,6 +189,13 @@
};
};

+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
--
2.7.4