[PATCH] clk: tidy up the help tags in Kconfig
From: Lubomir Rintel
Date: Fri Aug 16 2019 - 14:57:33 EST
Sometimes an extraneous "---help---" follows "help". That is probably a
copy&paste error stemming from their inconsistent use. Let's just replace
them all with "help", removing the extra ones along the way.
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
drivers/clk/Kconfig | 51 +++++++++++++++++++--------------------------
1 file changed, 21 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 801fa1cd03217..0acc1a8590897 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -13,7 +13,7 @@ config COMMON_CLK
select CLKDEV_LOOKUP
select SRCU
select RATIONAL
- ---help---
+ help
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
implementation of the clock API in include/linux/clk.h.
@@ -26,7 +26,7 @@ menu "Common Clock Framework"
config COMMON_CLK_WM831X
tristate "Clock driver for WM831x/2x PMICs"
depends on MFD_WM831X
- ---help---
+ help
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microelectronics.
@@ -35,14 +35,14 @@ source "drivers/clk/versatile/Kconfig"
config CLK_HSDK
bool "PLL Driver for HSDK platform"
depends on OF || COMPILE_TEST
- ---help---
+ help
This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
control.
config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77620/77686/77802 MFD"
depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
- ---help---
+ help
This driver supports Maxim 77620/77686/77802 crystal oscillator
clock.
@@ -55,7 +55,7 @@ config COMMON_CLK_MAX9485
config COMMON_CLK_RK808
tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
depends on MFD_RK808
- ---help---
+ help
This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
Clkout1 is always on, Clkout2 can off by control register.
@@ -65,7 +65,7 @@ config COMMON_CLK_HI655X
depends on (MFD_HI655X_PMIC || COMPILE_TEST)
depends on REGMAP
default MFD_HI655X_PMIC
- ---help---
+ help
This driver supports the hi655x PMIC clock. This
multi-function device has one fixed-rate oscillator, clocked
at 32KHz.
@@ -73,7 +73,7 @@ config COMMON_CLK_HI655X
config COMMON_CLK_SCMI
tristate "Clock driver controlled via SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
- ---help---
+ help
This driver provides support for clocks that are controlled
by firmware that implements the SCMI interface.
@@ -83,7 +83,7 @@ config COMMON_CLK_SCMI
config COMMON_CLK_SCPI
tristate "Clock driver controlled via SCPI interface"
depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
- ---help---
+ help
This driver provides support for clocks that are controlled
by firmware that implements the SCPI interface.
@@ -106,7 +106,7 @@ config COMMON_CLK_SI5351
depends on I2C
select REGMAP_I2C
select RATIONAL
- ---help---
+ help
This driver supports Silicon Labs 5351A/B/C programmable clock
generators.
@@ -116,7 +116,6 @@ config COMMON_CLK_SI514
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports the Silicon Labs 514 programmable clock
generator.
@@ -125,7 +124,6 @@ config COMMON_CLK_SI544
depends on I2C
select REGMAP_I2C
help
- ---help---
This driver supports the Silicon Labs 544 programmable clock
generator.
@@ -135,7 +133,6 @@ config COMMON_CLK_SI570
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
@@ -144,7 +141,7 @@ config COMMON_CLK_CDCE706
depends on I2C
select REGMAP_I2C
select RATIONAL
- ---help---
+ help
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
config COMMON_CLK_CDCE925
@@ -153,7 +150,6 @@ config COMMON_CLK_CDCE925
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports the TI CDCE913/925/937/949 programmable clock
synthesizer. Each chip has different number of PLLs and outputs.
For example, the CDCE925 contains two PLLs with spread-spectrum
@@ -176,7 +172,7 @@ config COMMON_CLK_GEMINI
depends on ARCH_GEMINI || COMPILE_TEST
select MFD_SYSCON
select RESET_CONTROLLER
- ---help---
+ help
This driver supports the SoC clocks on the Cortina Systems Gemini
platform, also known as SL3516 or CS3516.
@@ -186,7 +182,7 @@ config COMMON_CLK_ASPEED
default ARCH_ASPEED
select MFD_SYSCON
select RESET_CONTROLLER
- ---help---
+ help
This driver supports the SoC clocks on the Aspeed BMC platforms.
The G4 and G5 series, including the ast2400 and ast2500, are supported
@@ -195,7 +191,7 @@ config COMMON_CLK_ASPEED
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE || COMPILE_TEST
- ---help---
+ help
This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
clock. These multi-function devices have two (S2MPS14) or three
(S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
@@ -203,7 +199,7 @@ config COMMON_CLK_S2MPS11
config CLK_TWL6040
tristate "External McPDM functional clock from twl6040"
depends on TWL6040_CORE
- ---help---
+ help
Enable the external functional clock support on OMAP4+ platforms for
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
@@ -212,14 +208,13 @@ config COMMON_CLK_AXI_CLKGEN
tristate "AXI clkgen driver"
depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
help
- ---help---
Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
FPGAs. It is commonly used in Analog Devices' reference designs.
config CLK_QORIQ
bool "Clock driver for Freescale QorIQ platforms"
depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF
- ---help---
+ help
This adds the clock driver support for Freescale QorIQ platforms
using common clock framework.
@@ -227,7 +222,7 @@ config COMMON_CLK_XGENE
bool "Clock driver for APM XGene SoC"
default ARCH_XGENE
depends on ARM64 || COMPILE_TEST
- ---help---
+ help
Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
config COMMON_CLK_LOCHNAGAR
@@ -241,26 +236,26 @@ config COMMON_CLK_NXP
def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
select REGMAP_MMIO if ARCH_LPC32XX
select MFD_SYSCON if ARCH_LPC18XX
- ---help---
+ help
Support for clock providers on NXP platforms.
config COMMON_CLK_PALMAS
tristate "Clock driver for TI Palmas devices"
depends on MFD_PALMAS
- ---help---
+ help
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
using common clock framework.
config COMMON_CLK_PWM
tristate "Clock driver for PWMs used as clock outputs"
depends on PWM
- ---help---
+ help
Adapter driver so that any PWM output can be (mis)used as clock signal
at 50% duty cycle.
config COMMON_CLK_PXA
def_bool COMMON_CLK && ARCH_PXA
- ---help---
+ help
Support for the Marvell PXA SoC.
config COMMON_CLK_PIC32
@@ -270,7 +265,7 @@ config COMMON_CLK_OXNAS
bool "Clock driver for the OXNAS SoC Family"
depends on ARCH_OXNAS || COMPILE_TEST
select MFD_SYSCON
- ---help---
+ help
Support for the OXNAS SoC Family clocks.
config COMMON_CLK_VC5
@@ -279,26 +274,22 @@ config COMMON_CLK_VC5
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports the IDT VersaClock 5 and VersaClock 6
programmable clock generators.
config COMMON_CLK_STM32MP157
def_bool COMMON_CLK && MACH_STM32MP157
help
- ---help---
Support for stm32mp157 SoC family clocks
config COMMON_CLK_STM32F
def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
help
- ---help---
Support for stm32f4 and stm32f7 SoC families clocks
config COMMON_CLK_STM32H7
def_bool COMMON_CLK && MACH_STM32H743
help
- ---help---
Support for stm32h7 SoC family clocks
config COMMON_CLK_BD718XX
--
2.21.0