Re: [PATCH net-next v7 3/3] net: phy: broadcom: add 1000Base-X support for BCM54616S

From: Tao Ren
Date: Thu Aug 15 2019 - 19:20:20 EST


On 8/15/19 4:15 PM, Vladimir Oltean wrote:
> Hi Tao,
>
> On Fri, 16 Aug 2019 at 02:13, Tao Ren <taoren@xxxxxx> wrote:
>>
>> Hi Andrew / Florian / Heiner / Vladimir,
>>
>> Any further suggestions on the patch series?
>>
>>
>> Thanks,
>>
>> Tao
>>
>> On 8/11/19 4:40 PM, Tao Ren wrote:
>>> The BCM54616S PHY cannot work properly in RGMII->1000Base-X mode, mainly
>>> because genphy functions are designed for copper links, and 1000Base-X
>>> (clause 37) auto negotiation needs to be handled differently.
>>>
>>> This patch enables 1000Base-X support for BCM54616S by customizing 3
>>> driver callbacks, and it's verified to be working on Facebook CMM BMC
>>> platform (RGMII->1000Base-KX):
>>>
>>> - probe: probe callback detects PHY's operation mode based on
>>> INTERF_SEL[1:0] pins and 1000X/100FX selection bit in SerDES 100-FX
>>> Control register.
>>>
>>> - config_aneg: calls genphy_c37_config_aneg when the PHY is running in
>>> 1000Base-X mode; otherwise, genphy_config_aneg will be called.
>>>
>>> - read_status: calls genphy_c37_read_status when the PHY is running in
>>> 1000Base-X mode; otherwise, genphy_read_status will be called.
>>>
>>> Note: BCM54616S PHY can also be configured in RGMII->100Base-FX mode, and
>>> 100Base-FX support is not available as of now.
>>>
>>> Signed-off-by: Tao Ren <taoren@xxxxxx>
>>> ---
>
> The patchset looks good to me. However I am not a maintainer.
> If it helps,
>
> Acked-by: Vladimir Oltean <olteanv@xxxxxxxxx>

Thank you Vladimir!


Cheers,

Tao