Re: [PATCH 1/2] usb: serial: option: Add the BroadMobi BM818 card

From: Johan Hovold
Date: Thu Aug 15 2019 - 08:28:31 EST


On Thu, Aug 15, 2019 at 01:19:19PM +0100, Bob Ham wrote:
> On 15/08/2019 12:49, Johan Hovold wrote:
> > On Mon, Aug 05, 2019 at 03:44:30PM +0100, Bob Ham wrote:
> >> On 05/08/2019 12:47, Johan Hovold wrote:
> >>> On Wed, Jul 24, 2019 at 07:52:26AM -0700, Angus Ainslie (Purism) wrote:
> >>>> From: Bob Ham <bob.ham@xxxxxxx>
> >>>>
> >>>> Add a VID:PID for the BroadModi BM818 M.2 card
> >>>
> >>> Would you mind posting the output of usb-devices (or lsusb -v) for this
> >>> device?
> >>
> >> T: Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0
> >> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> >> P: Vendor=2020 ProdID=2060 Rev=00.00
> >> S: Manufacturer=Qualcomm, Incorporated
> >> S: Product=Qualcomm CDMA Technologies MSM
> >> C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
> >> I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> >> I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> >> I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> >> I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none)
> >> I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> >
> > I amended the commit message with the above, switched to
> > USB_DEVICE_INTERFACE_CLASS(), fixed the comment and moved the entry
> > to the other 0x2020 entries before applying.
>
> Sorry I should probably have mentioned this before but Angus has been on
> vacation, hence the silence on the other matters. Regardless, thanks.

Ok, no worries.

Johan

Attachment: signature.asc
Description: PGP signature