Re: [PATCH v2 3/4] hwmon/ltc2990: Add platform_data support

From: Max Staudt
Date: Tue Aug 13 2019 - 06:10:38 EST


On 08/13/2019 10:02 AM, Guenter Roeck wrote:
> On Tue, Aug 13, 2019 at 01:52:36AM +0200, Max Staudt wrote:
>> This allows code using i2c_new_device() to specify a measurement mode.
>>
>> Signed-off-by: Max Staudt <max@xxxxxxxxx>
>> Reviewed-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
>> ---
>> drivers/hwmon/ltc2990.c | 9 +++++++++
>> include/linux/platform_data/ltc2990.h | 11 +++++++++++
>> 2 files changed, 20 insertions(+)
>> create mode 100644 include/linux/platform_data/ltc2990.h
>>
>> diff --git a/drivers/hwmon/ltc2990.c b/drivers/hwmon/ltc2990.c
>> index f9431ad43..f19b9c50c 100644
>> --- a/drivers/hwmon/ltc2990.c
>> +++ b/drivers/hwmon/ltc2990.c
>> @@ -14,6 +14,7 @@
>> #include <linux/kernel.h>
>> #include <linux/module.h>
>> #include <linux/of.h>
>> +#include <linux/platform_data/ltc2990.h>
>>
>> #define LTC2990_STATUS 0x00
>> #define LTC2990_CONTROL 0x01
>> @@ -206,6 +207,7 @@ static int ltc2990_i2c_probe(struct i2c_client *i2c,
>> int ret;
>> struct device *hwmon_dev;
>> struct ltc2990_data *data;
>> + struct ltc2990_platform_data *pdata = dev_get_platdata(&i2c->dev);
>> struct device_node *of_node = i2c->dev.of_node;
>>
>> if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
>> @@ -227,6 +229,13 @@ static int ltc2990_i2c_probe(struct i2c_client *i2c,
>> if (data->mode[0] & ~LTC2990_MODE0_MASK ||
>> data->mode[1] & ~LTC2990_MODE1_MASK)
>> return -EINVAL;
>> + } else if (pdata) {
>> + data->mode[0] = pdata->meas_mode[0];
>> + data->mode[1] = pdata->meas_mode[1];
>> +
>> + if (data->mode[0] & ~LTC2990_MODE0_MASK ||
>> + data->mode[1] & ~LTC2990_MODE1_MASK)
>> + return -EINVAL;
>
> I would prefer if the driver was modified to accept device
> properties, and if those were set using the appropriate
> fwnode function. Any reason for not doing that ?

The driver does have DT support implemented right above my new platform_data code, and DT takes precedence. However, I can't set DT data programatically when instantiating the client using i2c_new_device() - hence the platform_data support.

Max