Re: [PATCH v5 00/18] add thermal driver for h6

From: Frank Lee
Date: Mon Aug 12 2019 - 19:36:15 EST


On Mon, Aug 12, 2019 at 5:14 AM ClÃment PÃron <peron.clem@xxxxxxxxx> wrote:
>
> Hi Yangtao,
>
> On 10/08/2019 07:28, Yangtao Li wrote:
> > This patchset add support for A64, H3, H5, H6 and R40 thermal sensor.
>
> Could you add the device-tree configuration in the same series?
> This will allow user to test it.

Ok, it will be added later.

Yangtao

>
> Thanks,
> ClÃment
>
> >
> > Thx to Icenowy and Vasily.
> >
> > BTY, do a cleanup in thermal makfile.
> >
> > Icenowy Zheng (3):
> > thermal: sun8i: allow to use custom temperature calculation function
> > thermal: sun8i: add support for Allwinner H5 thermal sensor
> > thermal: sun8i: add support for Allwinner R40 thermal sensor
> >
> > Vasily Khoruzhick (1):
> > thermal: sun8i: add thermal driver for A64
> >
> > Yangtao Li (14):
> > thermal: sun8i: add thermal driver for h6
> > dt-bindings: thermal: add binding document for h6 thermal controller
> > thermal: fix indentation in makefile
> > thermal: sun8i: get ths sensor number from device compatible
> > thermal: sun8i: rework for sun8i_ths_get_temp()
> > thermal: sun8i: get ths init func from device compatible
> > thermal: sun8i: rework for ths irq handler func
> > thermal: sun8i: support mod clocks
> > thermal: sun8i: rework for ths calibrate func
> > dt-bindings: thermal: add binding document for h3 thermal controller
> > thermal: sun8i: add thermal driver for h3
> > dt-bindings: thermal: add binding document for a64 thermal controller
> > dt-bindings: thermal: add binding document for h5 thermal controller
> > dt-bindings: thermal: add binding document for r40 thermal controller
> >
> > .../bindings/thermal/sun8i-thermal.yaml | 157 +++++
> > MAINTAINERS | 7 +
> > drivers/thermal/Kconfig | 14 +
> > drivers/thermal/Makefile | 9 +-
> > drivers/thermal/sun8i_thermal.c | 596 ++++++++++++++++++
> > 5 files changed, 779 insertions(+), 4 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> > create mode 100644 drivers/thermal/sun8i_thermal.c
> > ---
> > v5:
> > -add more support
> > -some trival fix
> > ---
> > 2.17.1
> >
> >