[PATCH v9 11/21] iommu/mediatek: Refine protect memory definition

From: Yong Wu
Date: Sat Aug 10 2019 - 04:00:44 EST


The protect memory setting is a little different in the different SoCs.
In the register REG_MMU_CTRL_REG(0x110), the TF_PROT(translation fault
protect) shift bit is normally 4 while it shift 5 bits only in the
mt8173. This patch delete the complex MACRO and use a common if-else
instead.

Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
Reviewed-by: Evan Green <evgreen@xxxxxxxxxxxx>
Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
---
drivers/iommu/mtk_iommu.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 1b16efc..066a485 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -44,12 +44,9 @@
#define REG_MMU_DCM_DIS 0x050

#define REG_MMU_CTRL_REG 0x110
+#define F_MMU_TF_PROT_TO_PROGRAM_ADDR (2 << 4)
#define F_MMU_PREFETCH_RT_REPLACE_MOD BIT(4)
-#define F_MMU_TF_PROTECT_SEL_SHIFT(data) \
- ((data)->plat_data->m4u_plat == M4U_MT2712 ? 4 : 5)
-/* It's named by F_MMU_TF_PROT_SEL in mt2712. */
-#define F_MMU_TF_PROTECT_SEL(prot, data) \
- (((prot) & 0x3) << F_MMU_TF_PROTECT_SEL_SHIFT(data))
+#define F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173 (2 << 5)

#define REG_MMU_IVRP_PADDR 0x114

@@ -512,9 +509,11 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
return ret;
}

- regval = F_MMU_TF_PROTECT_SEL(2, data);
if (data->plat_data->m4u_plat == M4U_MT8173)
- regval |= F_MMU_PREFETCH_RT_REPLACE_MOD;
+ regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
+ F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
+ else
+ regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);

regval = F_L2_MULIT_HIT_EN |
--
1.9.1