[PATCH v5 09/18] thermal: sun8i: rework for ths calibrate func

From: Yangtao Li
Date: Sat Aug 10 2019 - 01:29:54 EST


Here, we do something to prepare for the subsequent
support of multiple platforms.

1) rename sun50i_ths_calibrate to sun8i_ths_calibrate, because
this function should be suitable for all platforms now.

2) introduce calibrate callback to mask calibration method
differences.

Signed-off-by: Yangtao Li <tiny.windzz@xxxxxxxxx>
---
drivers/thermal/sun8i_thermal.c | 86 ++++++++++++++++++---------------
1 file changed, 48 insertions(+), 38 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 6f4294c2aba7..47c20c4c69e7 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -60,6 +60,8 @@ struct ths_thermal_chip {
int scale;
int ft_deviation;
int temp_data_base;
+ int (*calibrate)(struct ths_device *tmdev,
+ u16 *caldata, int callen);
int (*init)(struct ths_device *tmdev);
int (*irq_ack)(struct ths_device *tmdev);
};
@@ -152,45 +154,14 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data)
return IRQ_HANDLED;
}

-static int sun50i_ths_calibrate(struct ths_device *tmdev)
+static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
+ u16 *caldata, int callen)
{
- struct nvmem_cell *calcell;
struct device *dev = tmdev->dev;
- u16 *caldata;
- size_t callen;
- int ft_temp;
- int i, ret = 0;
-
- calcell = devm_nvmem_cell_get(dev, "calib");
- if (IS_ERR(calcell)) {
- if (PTR_ERR(calcell) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- /*
- * Even if the external calibration data stored in sid is
- * not accessible, the THS hardware can still work, although
- * the data won't be so accurate.
- *
- * The default value of calibration register is 0x800 for
- * every sensor, and the calibration value is usually 0x7xx
- * or 0x8xx, so they won't be away from the default value
- * for a lot.
- *
- * So here we do not return error if the calibartion data is
- * not available, except the probe needs deferring.
- */
- goto out;
- }
+ int i, ft_temp;

- caldata = nvmem_cell_read(calcell, &callen);
- if (IS_ERR(caldata)) {
- ret = PTR_ERR(caldata);
- goto out;
- }
-
- if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) {
- ret = -EINVAL;
- goto out_free;
- }
+ if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+ return -EINVAL;

/*
* efuse layout:
@@ -245,7 +216,45 @@ static int sun50i_ths_calibrate(struct ths_device *tmdev)
cdata << offset);
}

-out_free:
+ return 0;
+}
+
+static int sun8i_ths_calibrate(struct ths_device *tmdev)
+{
+ struct nvmem_cell *calcell;
+ struct device *dev = tmdev->dev;
+ u16 *caldata;
+ size_t callen;
+ int ret = 0;
+
+ calcell = devm_nvmem_cell_get(dev, "calib");
+ if (IS_ERR(calcell)) {
+ if (PTR_ERR(calcell) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ /*
+ * Even if the external calibration data stored in sid is
+ * not accessible, the THS hardware can still work, although
+ * the data won't be so accurate.
+ *
+ * The default value of calibration register is 0x800 for
+ * every sensor, and the calibration value is usually 0x7xx
+ * or 0x8xx, so they won't be away from the default value
+ * for a lot.
+ *
+ * So here we do not return error if the calibartion data is
+ * not available, except the probe needs deferring.
+ */
+ goto out;
+ }
+
+ caldata = nvmem_cell_read(calcell, &callen);
+ if (IS_ERR(caldata)) {
+ ret = PTR_ERR(caldata);
+ goto out;
+ }
+
+ tmdev->chip->calibrate(tmdev, caldata, callen);
+
kfree(caldata);
out:
return ret;
@@ -294,7 +303,7 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
if (ret)
goto bus_disable;

- ret = sun50i_ths_calibrate(tmdev);
+ ret = sun8i_ths_calibrate(tmdev);
if (ret)
goto mod_disable;

@@ -422,6 +431,7 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
.scale = -67,
.ft_deviation = SUN50I_H6_FT_DEVIATION,
.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+ .calibrate = sun50i_h6_ths_calibrate,
.init = sun50i_h6_thermal_init,
.irq_ack = sun50i_h6_irq_ack,
};
--
2.17.1